An Induction Machine Emulator for High-Power Applications Utilizing Advanced Simulation Tools With Graphical User Interfaces

In this paper, a method is presented for removing the risk associated with the testing and development of novel drive system topologies, prototype electrical machines, advanced control system strategies, or a combination of the aforementioned without using any real motors/generators. The test platforms for low-power machines are relatively inexpensive and accessible; however, as power levels increase into the upper kilowatt and megawatt range, validation of prototype machines and drives becomes costly. The proposed induction machine emulator (IME) platform utilizes the power hardware-in-the-loop concept in conjunction with a high-fidelity machine model and load dynamics. The electrical machine and its load dynamics are simulated with a real-time digital simulator, which generates appropriate control commands to a power electronics-based voltage amplifier that interfaces to a variable speed drive (VSD). Specifically, the current draw is recreated by altering the phase and magnitude of a voltage amplifier connected to a VSD under test via a unique transformer-based LCL-type coupling network. Based on the proposed concept, the use of a multiwinding, tap-changing transformer establishes a truly versatile and universal test platform for a wide range of power levels. In addition, this paper presents a control strategy in the synchronously rotating reference frame in dq coordinates for the power electronic converters in IME operation. Experimental results at the 25-kVA power level validate the feasibility and highly dynamic performance of the proposed test platform.

[1]  A. H. Bonnett,et al.  Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors , 1994, Proceedings of IEEE Pulp and Paper Industry Conference.

[2]  V. Staudt,et al.  Machine emulator: Power-electronics based test equipment for testing high-power drive converters , 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.

[3]  Manfred Depenbrock,et al.  Model-based speed identification for induction Machines in the whole operating range , 2006, IEEE Transactions on Industrial Electronics.

[4]  Michael Steurer,et al.  A Megawatt-Scale Power Hardware-in-the-Loop Simulation Setup for Motor Drives , 2010, IEEE Transactions on Industrial Electronics.

[5]  Scott D. Sudhoff,et al.  Analysis of Electric Machinery and Drive Systems , 1995 .

[6]  Salvatore D'Arco,et al.  Comparing the Dynamic Performances of Power Hardware-in-the-Loop Interfaces , 2010, IEEE Transactions on Industrial Electronics.

[7]  Dehong Xu,et al.  An Improved Control Strategy for Grid-Connected Voltage Source Inverters With an LCL Filter , 2006, IEEE Transactions on Power Electronics.

[8]  P. Steimer,et al.  Design comparison and control of medium voltage STATCOM with novel twin converter topology , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[9]  M. Steurer,et al.  Synchronization of three-phase converters and virtual microgrid implementation utilizing the Power-Hardware-in-the-Loop concept , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[10]  Jon Clare,et al.  Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation , 1996 .

[11]  D. Schlegel,et al.  Reflected wave modeling techniques for PWM AC motor drives , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[12]  P.K. Steimer,et al.  Practical medium voltage converter topologies for high power applications , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[13]  Marko Hinkkanen,et al.  Sensorless control of induction motor drives equipped with inverter output filter , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[14]  Hermann W. Dommel,et al.  Digital Computer Solution of Electromagnetic Transients in Single-and Multiphase Networks , 1969 .

[15]  M. Steurer,et al.  An effective method for evaluating the accuracy of Power Hardware-in-the-Loop simulations , 2008, 2008 IEEE/IAS Industrial and Commercial Power Systems Technical Conference.

[16]  Thomas A. Lipo,et al.  Filter networks for long cable drives and their influence on motor voltage distribution and common-mode currents , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[17]  J. Jatskevich,et al.  A Voltage-Behind-Reactance Induction Machine Model for the EMTP-Type Solution , 2008, IEEE Transactions on Power Systems.

[18]  Dehong Xu,et al.  An improved control strategy for grid-connected voltage source inverters with a LCL filter , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[19]  David J. Atkinson,et al.  Real-time emulation for power equipment development. Part 1: Real-time simulation , 1998 .

[20]  I. M. Canay,et al.  Modelling of alternating-current machines having multiple rotor circuits , 1993 .

[21]  Michael STEURER,et al.  MODEL VALIDATION AND VOLTAGE DEVIATION ANALYSIS OF AN EXISTING WIND FARM USING HIGH FIDELITY REAL TIME DIGITAL SIMULATION , 2007 .

[22]  Werner Leonhard,et al.  Control of Electrical Drives , 1990 .

[23]  V. Venegas,et al.  Transient overvoltages in electrical motors during sequential pole closure , 1999 .

[24]  A. M. Gole,et al.  Improved Interfacing of Electrical Machine Models to Electromagnetic Transients Programs , 1984, IEEE Transactions on Power Apparatus and Systems.

[25]  W.L.A. Neves,et al.  Estimation of transformer saturation characteristics from inrush current waveforms , 2006, IEEE Transactions on Power Delivery.

[26]  Yerramreddy Srinivasa Rao,et al.  Real-Time Electrical Load Emulator Using Optimal Feedback Control Technique , 2010, IEEE Transactions on Industrial Electronics.

[27]  Walter Schumacher,et al.  A High-Performance Electronic Hardware-in-the-Loop Drive–Load Simulation Using a Linear Inverter (LinVerter) , 2010, IEEE Transactions on Industrial Electronics.

[28]  Hirofumi Akagi,et al.  Instantaneous power theory and applications to power conditioning , 2007 .

[29]  Stephen J. Finney,et al.  Vector control PWM-VSI induction motor drive with a long motor feeder: performance analysis of line filter networks , 2011 .