CHAPTER 5 – THE RHEOLOGY OF DRILLING FLUIDS

[1]  M. Reiner.  The Theory of Plastic Flow in the Rotation Viscometer , 1929 .

[2]  M. Mooney.  Explicit Formulas for Slip and Fluidity , 1931 .

[3]  C. Goodeve.  A general theory of thixotropy and viscosity , 1939 .

[4]  A. Garrison.  Surface Chemistry of Clays and Shales , 1939 .

[5]  Bengt O. A. Hedstrm.  Flow of Plastic Materials in Pipes , 1952 .

[6]  William M. Koch.  Fluid Mechanics of the Drilling String , 1953 .

[7]  A. B. Metzner,et al.  Flow of non‐newtonian fluids—correlation of the laminar, transition, and turbulent‐flow regions , 1955 .

[8]  A. B. Metzner.  Non-Newtonian Technology: Fluid Mechanics, Mixing, and Heat Transfer , 1956 .

[9]  N. Ryan,et al.  Transistion from laminar to turbulent flow in pipes , 1959 .

[10]  A. B. Metzner,et al.  Turbulent flow of non‐newtonian systems , 1959 .

[11]  J. A. Burkhardt.  Wellbore Pressure Surges Produced by Pipe Movement , 1961 .

[12]  K. H. Hiller,et al.  Rheological Measurements on Clay Suspensions and Drilling Fluids at High Temperatures and Pressures , 1963 .

[13]  J. G. Savins.  Drag Reduction Characteristics of Solutions of Macromolecules In Turbulent Pipe Flow , 1964 .

[14]  R. Hughes,et al.  Factors Involved in High-Temperature Drilling Fluids , 1965 .

[15]  J. G. Savins,et al.  Viscosity profiles, discharge rates, pressures, and torques for a rheologically complex fluid in a helical flow , 1966 .

[16]  J. Eckel.  Microbit Studies of the Effect of Fluid Properties and Hydraulics on Drilling Rate , 1967 .

[17]  R. W. Hanks.  On the Flow of Bingham Plastic Slurries in Pipes and Between Parallel Plates , 1967 .

[18]  M. Annis.  High-Temperature Flow Properties of Water-Base Drilling Fluids , 1967 .

[19]  E. Hopkin.  Factors Affecting Cuttings Removal During Rotary Drilling , 1967 .

[20]  L. R. Raymond.  Temperature Distribution in a Circulating Drilling Fluid , 1969 .

[21]  H. Darley.  A Laboratory Investigation of Borehole Stability , 1969 .

[22]  B. Sinha.  A New Technique to Determine the Equivalent Viscosity of Drilling Fluids Under High Temperatures and Pressures , 1970 .

[23]  Udo H. Zeidler.  An Experimental Analysis of the Transport of Drilled Particles , 1972 .

[24]  M. Chenevert,et al.  A New Approach to Preventing Lost Returns , 1974 .

[25]  R. E. Walker,et al.  Field Method of Evaluating Annular Performance of Drilling Fluids , 1974 .

[26]  J. Fontenot,et al.  An Improved Method for Calculating Swab and Surge Pressures and Circulating Pressures in a Drilling Well , 1974 .

[27]  Thomas R. Sifferman,et al.  Drill Cutting Transport in Full Scale Vertical Annuli , 1974 .

[28]  R. B. Bennett,et al.  The Effect of Temperature and Pressure on the Viscosity of Oil-Base Muds , 1975 .

[29]  R. E. Walker,et al.  Design of Muds for Carrying Capacity , 1975 .

[30]  J. J. Azar,et al.  An Accurate Slot-Flow Model for Non-Newtonian Fluid Flow Through Eccentric Annuli , 1981 .

[31]  J. J. Azar,et al.  Drillpipe Eccentricity Effect on Drilled Cuttings Behavior in Vertical Wellbores , 1982 .

[32]  B. V. Randall,et al.  Flow of Mud During Drilling Operations , 1982 .

[33]  J. J. Azar,et al.  Experimental study of cuttings transport in directional wells , 1983 .

[34]  J. J. Azar,et al.  Experimental Study of Drilled Cuttings Transport Using Common Drilling Muds , 1983 .

[35]  M. D. Politte.  Invert Oil Mud Rheology as a Function of Temperature and Pressure , 1985 .

[36]  M. Martin,et al.  Transport of Cuttings in Directional Wells , 1987 .

[37]  R. Mitchell.  Dynamic surge/Swab pressure predictions , 1988 .