Enhancing the performance of organic light-emitting devices by selective thermal treatment

Joule heat generated during device operation has been considered the important factor causing device degradation. We hence fabricated two devices composing indium–tin-oxide (ITO)/N,NV -bis-(1-naphthy)-N,NVVV (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq3)/aluminum (Al) and ITO/NPB/Alq3/lithium-fluoride/Al to investigate the effect of heat on device performance by annealing the whole devices at different temperatures or by selectively annealing the desired layer(s) at a certain temperature. The devices annealed at an appropriate temperature, such as 120 -C, showed marked improvement in luminescent efficiency, brightness, and operating stability. Thermal annealing the NPB and Al electrode layers, especially the latter one, greatly improved the performance. The enhancements may be attributed to better electron injection and higher electron/hole recombination efficiency upon appropriate annealing. D 2005 Elsevier B.V. All rights reserved.

[1]  Stephen R. Forrest,et al.  High-efficiency red electrophosphorescence devices , 2001 .

[2]  In-Jae Chung,et al.  Effect of thermal annealing on the lifetime of polymer light-emitting diodes , 2003 .

[3]  Z. Popović,et al.  Humidity-induced crystallization of tris (8-hydroxyquinoline) aluminum layers in organic light-emitting devices , 1998 .

[4]  Andrew G. Glen,et al.  APPL , 2001 .

[5]  Xu,et al.  Degradation mechanism of small molecule-based organic light-emitting devices , 1999, Science.

[6]  A. Okada,et al.  THERMAL STABILITY IN OLIGOMERIC TRIPHENYLAMINE/TRIS(8-QUINOLINOLATO) ALUMINUM ELECTROLUMINESCENT DEVICES , 1997 .

[7]  Stephen R. Forrest,et al.  Endothermic energy transfer: A mechanism for generating very efficient high-energy phosphorescent emission in organic materials , 2001 .

[8]  Stephen R. Forrest,et al.  Blue organic electrophosphorescence using exothermic host–guest energy transfer , 2003 .

[9]  Teruyoshi Mizutani,et al.  Effects of Plasma Modification on Hole Transport Layer in Organic Electroluminescent Diode , 1995 .

[10]  H. Chan,et al.  Investigation of the sites of dark spots in organic light-emitting devices , 2000 .

[11]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[12]  Akira J. Ikushima,et al.  Observation of degradation processes of Al electrodes in organic electroluminescence devices by electroluminescence microscopy, atomic force microscopy, scanning electron microscopy, and Auger electron spectroscopy , 1994 .

[13]  Lee-Mi Do,et al.  Growth of dark spots by interdiffusion across organic layers in organic electroluminescent devices , 1996 .

[14]  Xiaoyuan Hou,et al.  Bubble formation in organic light-emitting diodes , 2000 .

[15]  Peipei Sun,et al.  New Iridium Complexes as Highly Efficient Orange–Red Emitters in Organic Light‐Emitting Diodes , 2003 .

[16]  Shui-Tong Lee,et al.  Efficiency enhancement and retarded dark-spots growth of organic light-emitting devices by high-temperature processing , 2003 .

[17]  Stephen R. Forrest,et al.  Direct observation of structural changes in organic light emitting devices during degradation , 2001 .

[18]  Shui-Tong Lee,et al.  Organic electroluminescent devices by high-temperature processing and crystalline hole transporting layer , 1999 .