3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries

[1]  Hong‐Jie Peng,et al.  Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes , 2018 .

[2]  Kun Fu,et al.  Reducing Interfacial Resistance between Garnet‐Structured Solid‐State Electrolyte and Li‐Metal Anode by a Germanium Layer , 2017, Advanced materials.

[3]  Kun Fu,et al.  Negating interfacial impedance in garnet-based solid-state Li metal batteries. , 2017, Nature materials.

[4]  Yan‐Bing He,et al.  Dendrite‐Free, High‐Rate, Long‐Life Lithium Metal Batteries with a 3D Cross‐Linked Network Polymer Electrolyte , 2017, Advanced materials.

[5]  Shaomao Xu,et al.  High-capacity, low-tortuosity, and channel-guided lithium metal anode , 2017, Proceedings of the National Academy of Sciences.

[6]  Boyang Liu,et al.  A carbon-based 3D current collector with surface protection for Li metal anode , 2017, Nano Research.

[7]  Yayuan Liu,et al.  An Artificial Solid Electrolyte Interphase with High Li‐Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes , 2017, Advanced materials.

[8]  Bin Zhu,et al.  Poly(dimethylsiloxane) Thin Film as a Stable Interfacial Layer for High‐Performance Lithium‐Metal Battery Anodes , 2017, Advanced materials.

[9]  Dingchang Lin,et al.  Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement. , 2016, Journal of the American Chemical Society.

[10]  Cheol‐Min Park,et al.  Partially reversible Li 2 O formation in ZnO: A critical finding supporting realization of highly reversible metal oxide electrodes , 2016 .

[11]  Xin-Bing Cheng,et al.  Lithium metal protection through in-situ formed solid electrolyte interphase in lithium-sulfur batteries: The role of polysulfides on lithium anode , 2016 .

[12]  Meng Liu,et al.  Li2O-Reinforced Cu Nanoclusters as Porous Structure for Dendrite-Free and Long-Lifespan Lithium Metal Anode. , 2016, ACS applied materials & interfaces.

[13]  K. Yuan,et al.  Toward Dendrite-Free Lithium Deposition via Structural and Interfacial Synergistic Effects of 3D Graphene@Ni Scaffold. , 2016, ACS applied materials & interfaces.

[14]  Jingyu Wang,et al.  Constructing a novel carbon nitride/polyaniline/ZnO ternary heterostructure with enhanced photocatalytic performance using exfoliated carbon nitride nanosheets as supports. , 2016, Journal of hazardous materials.

[15]  Z. Bakenov,et al.  In situ sol-gel synthesis of ultrafine ZnO nanocrystals anchored on graphene as anode material for lithium-ion batteries , 2016 .

[16]  Yan‐Bing He,et al.  Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes , 2016, Advanced materials.

[17]  W. Hu,et al.  Pt-Decorated highly porous flower-like Ni particles with high mass activity for ammonia electro-oxidation , 2016 .

[18]  Yayuan Liu,et al.  Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. , 2016, Nature nanotechnology.

[19]  Yayuan Liu,et al.  Metallurgically lithiated SiOx anode with high capacity and ambient air compatibility , 2016, Proceedings of the National Academy of Sciences.

[20]  Yibo Wang,et al.  Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries , 2016, Proceedings of the National Academy of Sciences.

[21]  Yi Cui,et al.  Promises and challenges of nanomaterials for lithium-based rechargeable batteries , 2016, Nature Energy.

[22]  Jin Ge,et al.  Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance. , 2016, Nano letters.

[23]  Jiafeng Wan,et al.  Construction of 3D nanostructure hierarchical porous graphitic carbons by charge-induced self-assembly and nanocrystal-assisted catalytic graphitization for supercapacitors. , 2016, Chemical communications.

[24]  Guangyuan Zheng,et al.  Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design , 2016, Nature Communications.

[25]  Samuel S. Cartmell,et al.  Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High‐Concentration Electrolyte Layer , 2016 .

[26]  Xin-Bing Cheng,et al.  Dendrite‐Free Lithium Deposition Induced by Uniformly Distributed Lithium Ions for Efficient Lithium Metal Batteries , 2016, Advanced materials.

[27]  S. Choudhury,et al.  Hybrid Hairy Nanoparticle Electrolytes Stabilizing Lithium Metal Batteries , 2016 .

[28]  Yayuan Liu,et al.  Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode , 2016, Nature Communications.

[29]  Yu-Guo Guo,et al.  An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes , 2016, Advanced materials.

[30]  Xin-Bing Cheng,et al.  Conductive Nanostructured Scaffolds Render Low Local Current Density to Inhibit Lithium Dendrite Growth , 2016, Advanced materials.

[31]  Yi Cui,et al.  Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating , 2016, Proceedings of the National Academy of Sciences.

[32]  Hyun-Wook Lee,et al.  Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth , 2016, Nature Energy.

[33]  Jiulin Wang,et al.  A new ether-based electrolyte for dendrite-free lithium-metal based rechargeable batteries , 2016, Scientific Reports.

[34]  Z. Bakenov,et al.  Synthesis and electrochemical investigation of highly dispersed ZnO nanoparticles as anode material for lithium-ion batteries , 2016, Ionics.

[35]  Rui Zhang,et al.  A Review of Solid Electrolyte Interphases on Lithium Metal Anode , 2015, Advanced science.

[36]  Lynden A. Archer,et al.  A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles , 2015, Nature Communications.

[37]  Ya‐Xia Yin,et al.  Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes , 2015, Nature Communications.

[38]  Qiao Liu,et al.  Highly efficient oxygen reduction on porous nitrogen-doped nanocarbons directly synthesized from cellulose nanocrystals and urea , 2015 .

[39]  Ching-ping Wong,et al.  Graphene-based nitrogen self-doped hierarchical porous carbon aerogels derived from chitosan for high performance supercapacitors , 2015 .

[40]  X. Tao,et al.  Bio-templated Fabrication of Highly Defective Carbon Anchored MnO Anode Materials with High Reversible Capacity , 2015 .

[41]  Guangyuan Zheng,et al.  Polymer nanofiber-guided uniform lithium deposition for battery electrodes. , 2015, Nano letters.

[42]  Martin Winter,et al.  Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode. , 2015, Physical chemistry chemical physics : PCCP.

[43]  L. Zhi,et al.  Porous layer-stacking carbon derived from in-built template in biomass for high volumetric performance supercapacitors , 2015 .

[44]  Chuanbao Cao,et al.  Hierarchical porous nitrogen-doped carbon nanosheets derived from silk for ultrahigh-capacity battery anodes and supercapacitors. , 2015, ACS nano.

[45]  O. Borodin,et al.  High rate and stable cycling of lithium metal anode , 2015, Nature Communications.

[46]  Terence J. Lozano,et al.  Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes , 2015 .

[47]  G. Shi,et al.  An alumina stabilized ZnO-graphene anode for lithium ion batteries via atomic layer deposition. , 2014, Nanoscale.

[48]  Guangyuan Zheng,et al.  Interconnected hollow carbon nanospheres for stable lithium metal anodes. , 2014, Nature nanotechnology.

[49]  Jianhui Zhu,et al.  Evolution of disposable bamboo chopsticks into uniform carbon fibers: a smart strategy to fabricate sustainable anodes for Li-ion batteries , 2014 .

[50]  M. Winter,et al.  Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries , 2014 .

[51]  X. Tao,et al.  Biotemplated fabrication of Sn@C anode materials based on the unique metal biosorption behavior of microalgae. , 2014, ACS applied materials & interfaces.

[52]  X. Tao,et al.  Synthesis of boron carbide nanoflakes via a bamboo-based carbon thermal reduction method , 2013 .

[53]  Feng Wu,et al.  Enhanced electrochemical performance of ZnO-loaded/porous carbon composite as anode materials for lithium ion batteries. , 2013, ACS applied materials & interfaces.

[54]  B. Chowdari,et al.  Metal oxides and oxysalts as anode materials for Li ion batteries. , 2013, Chemical reviews.

[55]  Jun Liu,et al.  Dendrite-free lithium deposition via self-healing electrostatic shield mechanism. , 2013, Journal of the American Chemical Society.

[56]  Yong Ding,et al.  Hydrogenated ZnO core-shell nanocables for flexible supercapacitors and self-powered systems. , 2013, ACS nano.

[57]  P. Pfeifer,et al.  Nanospace engineering of KOH activated carbon , 2012, Nanotechnology.

[58]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[59]  X. Tao,et al.  TaC Nanowire/Activated Carbon Microfiber Hybrid Structures from Bamboo Fibers , 2011 .

[60]  X. Tao,et al.  A generic bamboo-based carbothermal method for preparing carbide (SiC, B4C, TiC, TaC, NbC, TixNb1−xC, and TaxNb1−xC) nanowires , 2011 .

[61]  M. Armand,et al.  Building better batteries , 2008, Nature.

[62]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.