A comparative study of the preparation and physical properties of polystyrene–silica mesocomposite and nanocomposite materials

In this paper, a comparative study with regard to the preparation and physical properties of as-prepared polystyrene – silica mesocomposite (PSM) and polystyrene-silica nanocomposite (PSN) materials is presented. Vinyl-modified mesoporous silica particles with a wormhole structure were first prepared by doping a sol-gel metal oxide with an optically active nonsurfactant (dibenzoyl-L-tartaric acid) as a template, followed by template removal through Soxhlet extraction. The as-prepared silica particles with/without mesopores were subsequently characterized using the Brunauer – Emmett – Teller method and transmission electron microscopy (TEM) and Fourier transform infrared, 13 CN MR and 29 Si NMR solid-state spectroscopy. A specific feed amount of silica particles was subsequently reacted with styrene monomer by free radical polymerization to yield a series of PSM and corresponding PSN materials. Both as-prepared composite systems were further characterized using TEM and scanning electron microscopy/energy-dispersive X-ray mapping studies. A systematic comparative study of the physical properties of both as-prepared composite materials clearly illustrated that PSM had effectively enhanced thermal stability, optical clarity and dielectric properties compared to the corresponding PSN counterpart. Evaluation was carried out using thermogravimetric analysis, differential scanning calorimetry, UV-visible transmission spectroscopy and dielectric constant measurements. c � 2011 Society of Chemical Industry

[1]  Yen Wei,et al.  Systematically comparative studies on the preparation and physical properties of PMMA-silica mesocomposite and nanocomposite membranes , 2010 .

[2]  J. Yang,et al.  Effect of vinyl-modified silica and raw silica particles on the properties of as-prepared polymer-silica nanocomposite foams. , 2008, Journal of nanoscience and nanotechnology.

[3]  Jiguang Liu,et al.  Aerosol assisted synthesis of silica/phenolic resin composite mesoporous hollow spheres , 2008 .

[4]  J. Kim,et al.  Organic/inorganic hybrid of polyaniline/BaTiO3 composites and their electrorheological and dielectric characteristics , 2007 .

[5]  Norio Miura,et al.  Polyaniline/single-wall carbon nanotube (PANI/SWCNT) composites for high performance supercapacitors , 2006 .

[6]  Chi-Feng Cheng,et al.  Effect of Reactive Channel Functional Groups and Nanoporosity of Nanoscale Mesoporous Silica on Properties of Polyimide Composite , 2006 .

[7]  V. Pavlínek,et al.  Synthesis and characterization of new mesoporous material with conducting polypyrrole confined in mesoporous silica , 2006 .

[8]  H. Choi,et al.  Ordering Behavior of Layered Silicate Nanocomposites with a Cylindrical Triblock Copolymer , 2006 .

[9]  T. Pinnavaia,et al.  Epoxy−Silica Mesocomposites with Enhanced Tensile Properties and Oxygen Permeability , 2006 .

[10]  Jinsong Zhang,et al.  Polymer-filled porous MCM-41: An effective means to design polymer-based nanocomposite , 2005 .

[11]  Chunshan Song,et al.  Low-temperature removal of H2S by nanoporous composite of polymer-mesoporous molecular sieve MCM-41 as adsorbent for fuel cell applications , 2005 .

[12]  A. Durán,et al.  Synthesis and characterisation of proton conducting styrene-co-methacrylate–silica sol–gel membranes containing tungstophosphoric acid , 2005 .

[13]  W. Chin,et al.  Viscosity, particle size distribution, and structural investigation of tetramethyloxysilane/2-hydroxyethyl methacrylate sols during the sol-gel process with acid and base catalysts , 2004 .

[14]  S. Ray,et al.  Organically modified layered titanate: A new nanofiller to improve the performance of biodegradable polylactide , 2004 .

[15]  Wen‐Chang Chen,et al.  Synthesis and characterization of organic–inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica , 2003 .

[16]  Y. Chujo,et al.  Synthesis of Organic−Inorganic Polymer Hybrids Having Interpenetrating Polymer Network Structure by Formation of Ruthenium−Bipyridyl Complex , 2002 .

[17]  I. Chu,et al.  Effects of heat treatment on the properties of poly(methyl methacrylate)/ silica hybrid materials prepared by sol-gel process , 2001 .

[18]  Wen‐Chang Chen,et al.  Synthesis and Characterization of Poly(methyl methacrylate)-Silica Hybrid Optical Thin Films , 2000 .

[19]  Yen Wei,et al.  Preparation and Physisorption Characterization of d-Glucose-Templated Mesoporous Silica Sol−Gel Materials , 1999 .

[20]  Jackie Y. Ying,et al.  SYNTHESIS AND APPLICATIONS OF SUPRAMOLECULAR-TEMPLATED MESOPOROUS MATERIALS , 1999 .

[21]  J. E. Mark,et al.  Organic-inorganic hybrid materials , 1998 .

[22]  Stephen Z. D. Cheng,et al.  A Non‐surfactant Templating Route to Mesoporous Silica Materials , 1998 .

[23]  Avelino Corma,et al.  From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis. , 1997, Chemical reviews.

[24]  Z. Huang,et al.  The effects of interactions on the properties of acrylic polymers/silica hybrid materials prepared by the in situ sol-gel process , 1997 .

[25]  C. Brinker,et al.  Template-Based Approaches to the Preparation of Amorphous, Nanoporous Silicas , 1996 .

[26]  H. Frisch,et al.  Hybrid inorganic/organic interpenetrating polymer networks based on zeolite 13x and polystyrene , 1995 .

[27]  F. Garnier.  Molecular Electronics. Edited by G. J. Ashwell, Wiley, New York 1992, X, 362 pp., hardcover £ 44.50; ISBN 0-86380-125-0 , 1992 .

[28]  B. K. Coltrain,et al.  In situ polymerization of tetraethoxysilane in poly(methyl methacrylate): morphology and dynamic mechanical properties , 1992 .

[29]  L. Hench,et al.  The sol-gel process , 1990 .

[30]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[31]  J. H. de Boer,et al.  Studies on pore systems in catalysts: V. The t method , 1965 .