Analysis of a protective composite panel with energy adsorbent in the form of foamed aluminium

The article presents the results of the investigations into modelling a blast wave for huge charges of 1kg TNT equivalent. Modelling of huge charges is a very interesting problem due to a scale effect. During numerical analyses a detonation phenomenon was ignored (for the reason of the analysis time). The paper considers the effects of the influence of a pressure wave coming from a huge TNT charge (modelled with energy) on a 6 mm thick steel plate as well as on a protective panel made of foamed aluminium with composite layer. A panel of foamed aluminium was used for the protection of the described plate. The particular elements of a panel, subjected to an experimental analysis, were jointed with the use of a glueing method. In the numerical model the particular component layers were jointed with contact. The ALE (Arbitrary-Lagrange-Euler) function was used for coupling between the Euler domain and the Lagrange domain. The method requires absolute location compatibility of the nodes from both jointed areas. In the results of the conducted investigations, the permanent deformation of the steel plate was obtained.. Additionally, the possibility of the steel plate deformation evaluation was considered on the basis of accessible literature. Due to a huge charge, the analysis was performed with the use of the finite element method with the experimental verification.