论文信息 - A force model for superfinish turning of pure copper with rounded edge tools at low feed rate

A force model for superfinish turning of pure copper with rounded edge tools at low feed rate

This paper presents a model for force prediction of superfinish turning operation on pure copper. The model is divided in two parts. The first part computes the forces acting on the rake face of the tool. The second part computes the forces on the clearance face that are much more important in superfinish machining than in conventional machining.

Guillaume Fromentin | Stéphanie Bissey-Breton | Gérard Poulachon | Dimitri Germain

[1] R. F. Scrutton,et al. Tool Edge Roundness and Stable Build-Up Formation in Finish Machining , 1974 .

[2] Milton C. Shaw. A new mechanism of plastic flow , 1980 .

[3] Pedro J. Arrazola,et al. Analysis of the inverse identification of constitutive equations applied in orthogonal cutting process , 2007 .

[4] P. Albrecht,et al. New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting , 1960 .

[5] Joseph A. Arsecularatne. On tool-chip interface stress distributions, ploughing force and size effect in machining , 1997 .

[6] W. Graham,et al. Determination of rake face stress distribution in orthogonal machining , 1982 .

[7] W. F. Hastings,et al. Predicting the strain rate in the zone of intense shear in which the chip is formed in machining from the dynamic flow stress properties of the work material and the cutting conditions , 1977, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[8] E. G. Thomsen,et al. Mechanics of plastic deformation in metal processing , 1965 .