Design of Analog Fuzzy Controller for Autonomous Mobile Robot

The analog fuzzy intelligent controllers for autonomous mobile robot to avoid static and dynamic obstacles in its local environment are presented. The controller designed for the robot is reconfigurable in nature in terms of number of rules in database i.e. flexibility for online rule change as per the frequency of obstacle in the local environment. The controller is proposed with adjustable membership function in terms of shape and degree of overlapping with dynamic rule base. New accurate MAX and MIN circuits are introduced. The controller is simulated using Tanner® tool. The two-input single-output fuzzy controller with 25 rules is implemented in 0.25µm CMOS technology. The maximum delay was found to be 9.915ns for the processing of 25 rules and the value of FLIPS was found to be 100.85 MFLIPS.

[1]  Michel Verleysen,et al.  Design of analog fuzzy logic controllers in CMOS technologies - implementation, test and application , 2003 .

[2]  A. Khoei,et al.  Design of a current-mode analog CMOS fuzzy logic controller , 2009, IEEE EUROCON 2009.

[3]  A.K. Taha,et al.  Design of a fuzzy logic programmable membership function circuit , 2000, Proceedings of the Seventeenth National Radio Science Conference. 17th NRSC'2000 (IEEE Cat. No.00EX396).

[4]  Raul Camposano,et al.  A novel analog fuzzy controller for intelligent sensors , 1995 .

[5]  A. Barriga,et al.  Flexible fuzzy controllers using mixed-signal current-mode techniques , 1997, Proceedings of 6th International Fuzzy Systems Conference.

[6]  Sadeq Aminifar,et al.  A Novel Defuzzifier as a Result of Designing of a Fuzzy Logic Controller as a Digital Chip Using New Strategy , 2012 .

[7]  C. Dualibel,et al.  On designing mixed-signal programmable fuzzy logic controllers as embedded subsystems in standard CMOS technologies , 2001, Symposium on Integrated Circuits and Systems Design.

[8]  Manira Khatun VLSI Implementation of Fuzzy Logic Circuit , 2014 .

[9]  Shuja A. Abbasi,et al.  VLSI Architecture of Fuzzy Logic Hardware Implementation: a Review , 2011 .

[10]  S. Aminifar,et al.  Design of a mixed-signal digital CMOS fuzzy logic controller (FLC) chip using new current mode circuits , 2011 .

[11]  M. E. Pour,et al.  A low power consumption and compact mixed-signal Gaussian membership function circuit for neural/fuzzy hardware , 2011, 2011 International Conference on Electronic Devices, Systems and Applications (ICEDSA).

[12]  Abdollah Khoei,et al.  A digital CMOS fuzzy logic controller chip using new fuzzifier and max circuit , 2006 .

[13]  Okyay Kaynak,et al.  Neuro-fuzzy architecture for CMOS implementation , 1999, IEEE Trans. Ind. Electron..

[14]  S. Aminifar,et al.  Implementation of a CMOS mixed-signal digital FLC chip using new fuzzifier and current mode A/D , 2007, 2007 6th International Conference on Information, Communications & Signal Processing.

[15]  S. Sanchez-Solano,et al.  CMOS fuzzy controllers implemented as mixed-signal ICs , 1996, 1996 IEEE International Symposium on Circuits and Systems. Circuits and Systems Connecting the World. ISCAS 96.

[16]  Ning Xi,et al.  Control in Robotics and Automation: Sensor-Based Integration , 1999 .

[17]  Ghader Yosefi,et al.  Hardware Implementation of an Adaptive Mixed Signal Neuro Fuzzy System Using High Speed and Low Power Analog CMOS Circuits , 2011 .

[18]  Abdollah Khoei,et al.  Design of an analog CMOS fuzzy logic controller chip , 2002, Fuzzy Sets Syst..

[19]  W.-S. Lin,et al.  Hierarchical fuzzy control for autonomous navigation of wheeled robots , 2005 .