Application of rod vortex generators for flow separation reduction on wind turbine rotor

[1]  Piotr Doerffer,et al.  Aerodynamic analysis of wind turbine rotor blades , 2015 .

[2]  Mark Woodgate,et al.  Aeroelastic analysis of wind turbines using a tightly coupled CFD–CSD method , 2014 .

[3]  Kakkattukuzhy M. Isaac,et al.  Biologically Inspired Wing Leading Edge for Enhanced Wind Turbine and Aircraft Performance , 2011 .

[4]  Karthik Duraisamy,et al.  Assessment of Transition Model and CFD Methodology for Wind Turbine Flows , 2012 .

[5]  Christian Bak,et al.  Deformable trailing edge flaps for modern megawatt wind turbine controllers using strain gauge sensors , 2010 .

[6]  Yanhui Feng,et al.  Early experiences with UK round 1 offshore wind farms , 2010 .

[7]  Michel Stanislas,et al.  Control of a decelerating boundary layer. Part 1: Optimization of passive vortex generators , 2006 .

[8]  C. Hirsch,et al.  Natural Shock Unsteadiness in Nozzle and Curved Channel (Piotr Doerffer) , 2010 .

[9]  Paul M. Weaver,et al.  Design and testing of a deformable wind turbine blade control surface , 2012 .

[10]  Xiaolu Zhao,et al.  Influence of trailing edge flap on wind turbine blade using three-dimensional computational fluid dynamics method , 2013 .

[11]  George N. Barakos,et al.  Development and Validation of a CFD Technique for the Aerodynamic Analysis of HAWT , 2009 .

[12]  Yongqian Liu,et al.  Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines , 2015 .

[13]  J. Blair Perot,et al.  CFD Simulation of the NREL Phase VI Rotor , 2014, 1404.6183.

[14]  Raymond Chow,et al.  Computational Investigations of Small Deploying Tabs and Flaps for Aerodynamic Load Control , 2007 .

[15]  Clara Marika Velte,et al.  Vortex Generator Induced Flow in a High Re Boundary Layer , 2014 .

[16]  John C. Lin,et al.  Review of research on low-profile vortex generators to control boundary-layer separation , 2002 .

[17]  Simon Prince,et al.  The application of passive air jet vortex‐generators to stall suppression on wind turbine blades , 2017 .

[18]  Florian R. Menter,et al.  Explicit Algebraic Reynolds Stress Models for Anisotropic Wall-Bounded Flows , 2012 .

[19]  A. Jameson,et al.  Numerical solution of the Euler equations by finite volume methods using Runge Kutta time stepping schemes , 1981 .

[20]  Maureen Hand,et al.  Unsteady Aerodynamics Experiment Phase VI: Wind Tunnel Test Con gurations and Available Data Campaigns , 2001 .

[21]  Clara Marika Velte,et al.  Aerodynamically shaped vortex generators , 2016 .

[22]  Wieslaw Ostachowicz,et al.  Bi‐axial neutral axis tracking for damage detection in wind‐turbine towers , 2016 .

[23]  F. Menter Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[24]  L. Henriksen,et al.  The DTU 10-MW Reference Wind Turbine , 2013 .

[25]  Scott J. Johnson,et al.  Active load control techniques for wind turbines. , 2008 .

[26]  C. L. Merkle,et al.  The application of preconditioning in viscous flows , 1993 .

[27]  Niels N. Sørensen,et al.  Navier-Stokes predictions of the NREL phase VI rotor in the NASA Ames 80-by-120 wind tunnel , 2002 .

[28]  Pawel Flaszynski Comparison of vortex generators effect on shock wave induced separation , 2016 .

[29]  Noor A. Ahmed,et al.  Wind Turbine Performance Improvements using Active Flow Control Techniques , 2012 .

[30]  Robert L. Nelson,et al.  A Smart Wind Turbine Blade Using Distributed Plasma Actuators for Improved Performance , 2008 .

[31]  G.A.M. Van Kuik,et al.  Aeroelastic Modelling and Comparison of Advanced Active Flap Control Concepts for Load Reduction on the Upwind 5MW Wind Turbine , 2009 .

[32]  P. Spalart A One-Equation Turbulence Model for Aerodynamic Flows , 1992 .

[33]  R. Szwaba,et al.  Experimental and numerical analysis of a streamwise vortex generator for subsonic flow , 2006 .

[34]  S. G. Horcas,et al.  Rotor-tower interactions of DTU 10MW reference wind turbine with a non-linear harmonic method , 2017 .

[35]  S Gómez-Iradi,et al.  Computational fluid dynamics investigation of some wind turbine rotor design parameters , 2008 .

[36]  Marko Hočevar,et al.  Control of Separation Flow over a Wind Turbine Blade with Plasma Actuators , 2012 .

[37]  Piotr Doerffer,et al.  Streamwise vortex generator for separation reduction on wind turbine profile , 2016 .

[38]  F. Fish,et al.  The tubercles on humpback whales' flippers: application of bio-inspired technology. , 2011, Integrative and comparative biology.

[39]  D. Rao,et al.  Boundary-layer submerged vortex generators for separation control - An exploratory study , 1988 .

[40]  Christian Oliver Paschereit,et al.  Vortex Generators for Wind Turbine Blades: A Combined Wind Tunnel and Wind Turbine Parametric Study , 2012 .

[41]  Ernst A. van Nierop,et al.  How bumps on whale flippers delay stall: an aerodynamic model. , 2008, Physical review letters.

[42]  Jinjun Wang,et al.  Plasma Virtual Actuators for Flow Control , 2015 .

[43]  Ri-Kui Zhang,et al.  Aerodynamic characteristics of wind turbine blades with a sinusoidal leading edge , 2012 .

[44]  Kyoungsik Chang,et al.  Wake Characteristics of Vane-Type Vortex Generators in a Flat Plate Laminar Boundary Layer , 2015 .