Engineering of chalcogenide materials for embedded applications of Phase Change Memory

Abstract Phase Change Memory technology can be a real breakthrough for process cost saving and performances for embedded applications. The feasibility at 90 nm technology node has been solidly proven in an industrial environment and the added value of this solution demonstrated. Nevertheless, for specific applications some improvement in High Temperature Data Retention (HTDR) characteristics is needed. In this work we present the engineering of chalcogenide materials in order to increase the stability of RESET state as a function of temperature. This goal has been achieved by exploring Ge-rich compounds in the Ge–Sb–Te ternary diagram. In particular, an optimized Ge x Sb y Te z Phase Change material, able to guarantee code integrity of the memory content after soldering thermal profile and data retention in extended temperature range has been obtained. Extrapolation of data retention at 10 years for temperatures higher than 150 °C cell-level has been demonstrated, thus enabling automotive applications.

[1]  Daniele Ielmini,et al.  Modeling Resistance Instabilities of Set and Reset States in Phase Change Memory With Ge-Rich GeSbTe , 2014, IEEE Transactions on Electron Devices.

[2]  G. Reimbold,et al.  N-doped GeTe as performance booster for embedded Phase-Change Memories , 2010, 2010 International Electron Devices Meeting.

[3]  A. Kotabe,et al.  Doped In-Ge-Te Phase Change Memory Featuring Stable Operation and Good Data Retention , 2007, 2007 IEEE International Electron Devices Meeting.

[4]  Seung-Yup Lee,et al.  Crystallization Behavior and Physical Properties of Sb-Excess Ge2Sb2 + x Te5 Thin Films for Phase Change Memory (PCM) Devices , 2006 .

[5]  Byoung-Joon Kim,et al.  Atomic migration in molten and crystalline Ge2Sb2Te5 under high electric field , 2009 .

[6]  J. Tominaga,et al.  Existence of tetrahedral site symmetry about Ge atoms in a single-crystal film of Ge2Sb2Te5 found by x-ray fluorescence holography , 2007 .

[7]  R. O. Jones,et al.  Structural phase transitions on the nanoscale: The crucial pattern in the phase-change materials Ge2Sb2Te5 and GeTe , 2007 .

[8]  P. Zuliani,et al.  Phase Change Memory technology for embedded non volatile memory applications for 90nm and beyond , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[9]  Roberto Bez,et al.  Chalcogenide PCM: a memory technology for next decade , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[10]  G. Reimbold,et al.  On Carbon doping to improve GeTe-based Phase-Change Memory data retention at high temperature , 2010, 2010 IEEE International Memory Workshop.

[11]  Kumar Virwani,et al.  Evidence of Crystallization–Induced Segregation in the Phase Change Material Te-Rich GST , 2011 .

[12]  M. Micoulaut,et al.  Understanding amorphous phase-change materials from the viewpoint of Maxwell rigidity , 2009, 0909.5080.

[13]  M. Lankhorst,et al.  Modelling glass transition temperatures of chalcogenide glasses. Applied to phase-change optical recording materials , 2002 .

[14]  Elisabetta Palumbo,et al.  Overcoming Temperature Limitations in Phase Change Memories With Optimized ${\rm Ge}_{\rm x}{\rm Sb}_{\rm y}{\rm Te}_{\rm z}$ , 2013, IEEE Transactions on Electron Devices.

[15]  Roberto Bez,et al.  Emerging memory technology perspective , 2012, Proceedings of Technical Program of 2012 VLSI Technology, System and Application.

[16]  G. Burr,et al.  Voltage polarity effects in GST-based phase change memory: Physical origins and implications , 2010, 2010 International Electron Devices Meeting.

[17]  K. S. Choi,et al.  Highly productive PCRAM technology platform and full chip operation: Based on 4F2 (84nm pitch) cell scheme for 1 Gb and beyond , 2011, 2011 International Electron Devices Meeting.

[18]  H. L. Lung,et al.  A high performance phase change memory with fast switching speed and high temperature retention by engineering the GexSbyTez phase change material , 2011, 2011 International Electron Devices Meeting.