Fatigue life prediction of wind turbine blade composite materials

Fatigue life prediction of wind turbine rotor blades is a very challenging task, as blade failure is led by different failure types that act synergistically. Inherent defects like wrinkles, fiber misalignments and voids, that can be introduced during fabrication, can constitute potential damage initiation points and rapidly develop to failure mechanisms like matrix cracking, transverse-ply cracking, interface cracking, debonding, fiber breakage, etc. Different methods have been established to address this problem, some based on phenomenological and others on actual damage mechanics modeling. This chapter aims to provide an overview of fatigue life modeling and prediction methodologies for the composite materials and structural composite elements that compose a wind turbine rotor blade under complex loading conditions

[1]  A. P. Vassilopoulos,et al.  A computational tool for the life prediction of GFRP laminates under irregular complex stress states: Influence of the fatigue failure criterion , 2010 .

[2]  M. Bartsch,et al.  Simulation and experimental validation of mixed mode delamination in multidirectional CF/PEEK laminates under fatigue loading , 2011 .

[3]  M. Wisnom,et al.  A new semi-empirical model for stress ratio effect on mode II fatigue delamination growth , 2011 .

[4]  Larry Lessard,et al.  Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments—II. Experimental evaluation , 1997 .

[5]  Instability of Thin-Walled GFRP Webs in Cell-Core Sandwiches under Combined Bending and Shear Loads , 2012 .

[6]  D. J. Lekou,et al.  Estimation of the Uncertainty in Measurement of Composite Material Mechanical Properties During Static Testing , 2011 .

[7]  W. Van Paepegem,et al.  Calculation of damage-dependent directional failure indices from the Tsai–Wu static failure criterion , 2003 .

[8]  Ws Johnson,et al.  Characterization of Mode I and Mixed-Mode Failure of Adhesive Bonds Between Composite Adherends , 1986 .

[9]  A. Kinloch,et al.  The prediction of crack growth in bonded joints under cyclic-fatigue loading. I. Experimental studies , 2003 .

[10]  A. P. Vassilopoulos,et al.  Stiffness Reduction of Composite Laminates under Combined Cyclic Stresses , 2001 .

[11]  Ian A. Ashcroft,et al.  Mode I fracture of epoxy bonded composite joints 2. Fatigue loading , 2002 .

[12]  Anastasios Vasilopoulos,et al.  Fatigue life prediction of composite materials under realistic loading conditions (variable amplitude loading) , 2010 .

[13]  G. K. Boerstra.  The Multislope model : A new description for the fatigue strength of glass fibre reinforced plastic , 2007 .

[14]  Shankar Mall,et al.  A fracture mechanics approach for designing adhesively bonded joints , 1985 .

[15]  John Dalsgaard Sørensen,et al.  Probabilistic Fatigue Design of Composite Material for Wind Turbine Blades , 2011 .

[16]  Ian A. Ashcroft,et al.  Mode I fracture of epoxy bonded composite joints: 1. Quasi-static loading , 2001 .

[17]  C. Bathias,et al.  Delamination Threshold and Loading Effect in Fiber Glass Epoxy Composite , 1985 .

[18]  T. Bogetti,et al.  Low-cycle fatigue of unidirectional composites:: Bi-linear S–N curves , 2002 .

[19]  Anastasios P. Vassilopoulos,et al.  Fatigue of Fiber-reinforced Composites , 2011 .

[20]  J. Mandell,et al.  Chapter 7 - Fatigue Behavior of Short Fiber Composite Materials , 1991 .

[21]  Theodore P. Philippidis,et al.  Strength Degradation due to Fatigue in Fiber Dominated Glass/Epoxy Composites: A Statistical Approach , 2009 .

[22]  Herbert J. Sutherland,et al.  Optimized Constant-Life Diagram for the Analysis of Fiberglass Composites Used in Wind Turbine Blades , 2005 .

[23]  Rinze Benedictus,et al.  Misinterpreting the Results: How Similitude can Improve our Understanding of Fatigue Delamination Growth , 2011 .

[24]  B. Harris,et al.  20 – A parametric constant-life model for prediction of the fatigue lives of fibre-reinforced plastics , 2003 .

[25]  A. P. Vassilopoulos,et al.  Mode I and II fracture behavior of adhesively-bonded pultruded composite joints , 2010 .

[26]  M. Hojo,et al.  Empirical model for stress ratio effect on fatigue delamination growth rate in composite laminates , 2004 .

[27]  W. Hwang,et al.  Fatigue of Composites—Fatigue Modulus Concept and Life Prediction , 1986 .

[28]  T. Adam,et al.  Life prediction for fatigue of T800/5245 carbon-fibre composites: I. Constant-amplitude loading , 1994 .

[29]  Christos Kassapoglou,et al.  Fatigue of composite materials under spectrum loading , 2010 .

[30]  B. Harris,et al.  A constant-life model of fatigue behaviour for carbon-fibre composites: the effect of impact damage , 1998 .

[31]  S. Mall,et al.  Stress ratio effect on cyclic debonding in adhesively bonded composite joints , 1987 .

[32]  Larry Lessard,et al.  Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments — I. Modelling , 1997 .

[33]  F. Aymerich,et al.  Response of notched carbon/PEEK and carbon/epoxy laminates subjected to tension fatigue loading , 2000 .

[34]  A. P. Vassilopoulos,et al.  Stiffness degradation and fatigue life prediction of adhesively-bonded joints for fiber-reinforced polymer composites , 2008 .

[35]  Pc Chou,et al.  Degradation and Sudden-Death Models of Fatigue of Graphite/Epoxy Composites , 1979 .

[36]  James R. Reeder,et al.  A Bilinear Failure Criterion for Mixed-Mode Delamination , 1993 .

[37]  D. Le,et al.  A total fatigue life model for mode I delaminated composite laminates , 2006 .

[38]  J. Davalos,et al.  Study of Load Ratio for Mode-I Fatigue Fracture of Wood-FRP-Bonded Interfaces , 2004 .

[39]  A. P. Vassilopoulos,et al.  Experimental investigation of the fatigue behavior of adhesively-bonded pultruded GFRP joints under different load ratios , 2011 .

[40]  Ramesh Talreja,et al.  Fatigue behaviour and life assessment of composite laminates under multiaxial loadings , 2010 .

[41]  A. P. Vassilopoulos,et al.  Fatigue Strength Prediction under Multiaxial Stress , 1999 .

[42]  A Chaudhuri,et al.  First Penning trap mass measurements beyond the proton drip line. , 2008, Physical review letters.

[43]  S. Mall,et al.  Characterization of Matrix Toughness Effect on Cyclic Delamination Growth in Graphite Fiber Composites , 1989 .

[44]  Anastasios P. Vassilopoulos,et al.  Piecewise non-linear constant life diagram formulation for FRP composite materials , 2010 .

[45]  Anthony J. Kinloch,et al.  The Fatigue and Durability Behaviour of Automotive Adhesives. Part III: Predicting the Service Life , 1998 .

[46]  A. P. Vassilopoulos,et al.  A hybrid S-N formulation for fatigue life modeling of composite materials and structures , 2012 .

[47]  W. Paepegem.  Fatigue damage modelling of composite materials with the phenomenological residual stiffness approach , 2010 .

[48]  Efstratios F. Georgopoulos,et al.  Artificial neural networks in spectrum fatigue life prediction of composite materials , 2007 .

[49]  A. P. Vassilopoulos,et al.  Introduction to the fatigue life prediction of composite materials and structures: past, present and future prospects , 2010 .

[50]  Theodore P. Philippidis,et al.  A study of factors affecting life prediction of composites under spectrum loading , 2009 .

[51]  J. G. Williams,et al.  The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test , 2003 .

[52]  J. Eisenmann,et al.  Characterizing delamination growth in graphite-epoxy , 1982 .

[53]  Philip Clausen,et al.  An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic composites for various stress ratios and test frequencies , 2003 .

[54]  J. S. Andrade,et al.  Universality behind Basquin's Law of Fatigue. , 2008, Physical review letters.

[55]  A. P. Vassilopoulos,et al.  Shear Buckling Resistance of GFRP Plate Girders , 2011 .

[56]  M. Hojo,et al.  Delamination Fatigue Crack Growth in Unidirectional Graphite/Epoxy Laminates , 1987 .

[57]  A New S-N Curve Model of Fiber Reinforced Plastic Composite , 2011 .

[58]  Anastasios P. Vassilopoulos,et al.  Influence of the constant life diagram formulation on the fatigue life prediction of composite materials , 2010 .

[59]  Y. Miyano,et al.  Prediction of Fatigue Life of a Conical Shaped Joint System for Fiber Reinforced Plastics under Arbitrary Frequency, Load Ratio and Temperature , 1997 .

[60]  Shahram Sarkani,et al.  Stochastic Fatigue Damage Accumulation of FRP Laminates and Joints , 1999 .

[61]  J. Davalos,et al.  Loading variable effects on mode—I fatigue of wood–FRP composite bonded interface , 2004 .

[62]  Transonic Resonance,et al.  Experimental Investigation of , 2001 .

[63]  Gerard Franklyn Fernando,et al.  Fatigue life prediction for hybrid composites , 1989 .

[64]  Efstratios F. Georgopoulos,et al.  Comparison of genetic programming with conventional methods for fatigue life modeling of FRP composite materials , 2008 .

[65]  W. S. Johnson.  Delamination and Debonding of Materials , 1985 .

[66]  Masaki Hojo,et al.  Mode I delamination fatigue properties of interlayer-toughened CF/epoxy laminates , 2006 .

[67]  C. G. Li,et al.  Some effects of matrix and interface properties on the fatigue of short fiber-reinforced thermoplastics , 1983 .

[68]  W. Van Paepegem,et al.  A new coupled approach of residual stiffness and strength for fatigue of fibre-reinforced composites , 2002 .

[69]  John F. Mandell,et al.  New Fatigue Data for Wind Turbine Blade Materials , 2003 .

[70]  Anastasios P. Vassilopoulos,et al.  Adaptive neuro-fuzzy inference system in modelling fatigue life of multidirectional composite laminates , 2008 .

[71]  C. Gustafson,et al.  Effect of matrix resin on delamination fatigue crack growth in CFRP laminates , 1994 .

[72]  A. P. Vassilopoulos,et al.  Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading , 2010 .

[73]  P. Paris.  A rational analytic theory of fatigue , 1961 .

[74]  M. Kawai.  A Method for Identifying Asymmetric Dissimilar Constant Fatigue Life Diagrams for CFRP Laminates , 2007 .

[75]  Anastasios P. Vassilopoulos,et al.  Life prediction methodology for GFRP laminates under spectrum loading , 2004 .

[76]  Anastasios P. Vassilopoulos,et al.  Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints , 2009 .

[77]  Theodore P. Philippidis,et al.  Residual strength after fatigue in composites: Theory vs. experiment , 2007 .

[78]  W. Van Paepegem,et al.  Coupled Residual Stiffness and Strength Model for Fatigue of Fibre-reinforced Composite Materials , 2002 .

[79]  R. Ritchie,et al.  Fracture toughness and R-Curve behavior of laminated brittle-matrix composites , 1998 .

[80]  Masamichi Kawai,et al.  Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature , 2007 .

[81]  D. J. Lekou,et al.  Mechanical property variability in FRP laminates and its effect on failure prediction , 2008 .

[82]  Homayoun Hadavinia,et al.  Predicting the service-life of adhesively-bonded joints , 2000 .

[83]  H. Hahn,et al.  Proof Testing of Composite Materials , 1975 .

[84]  Theodore P. Philippidis,et al.  A progressive damage simulation algorithm for GFRP composites under cyclic loading. Part I: Material constitutive model , 2011 .

[85]  Anastasios P. Vassilopoulos,et al.  Complex stress state effect on fatigue life of GRP laminates. Part I, experimental , 2002 .

[86]  Hiroshi Tanaka,et al.  Stress-ratio effect on mode II propagation of interlaminar fatigue cracks in graphite/epoxy composites , 1997 .

[87]  Gretchen B. Murri,et al.  Characterization of Mode I and Mode II delamination growth and thresholds in AS4/PEEK composites , 1990 .

[88]  A. Lystrup,et al.  Composite materials for wind power turbine blades , 2005 .

[89]  A. Russell,et al.  A Constant ΔG Test for Measuring Mode I Interlaminar Fatigue Crack Growth Rates , 1988 .

[90]  Bent F. Sørensen,et al.  Reliability of Wind Turbine Blades: An Overview of Materials Testing , 2007 .

[91]  Alfonso Fernández Canteli,et al.  Fatigue delamination, initiation, and growth, under mode I and II of fracture in a carbon-fiber epoxy composite , 2009 .

[92]  John Goodman,et al.  Mechanics applied to engineering , 1904 .

[93]  John Dalsgaard Sørensen,et al.  Reliability-Based Design of Wind Turbine Blades , 2011 .

[94]  A. P. Vassilopoulos,et al.  A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints , 2012 .

[95]  M. Benzeggagh,et al.  Experimental development of fatigue delamination threshold criterion , 2011 .

[96]  A. P. Vassilopoulos,et al.  Contribution to Shear Wrinkling of GFRP Webs in Cell-Core Sandwiches , 2011 .

[97]  Anastasios P. Vassilopoulos.  A New Software Framework for Fatigue Life Prediction of Composite Materials under Irregular Loading , 2006 .

[98]  Anastasios P. Vassilopoulos,et al.  Fatigue design allowables for GRP laminates based on stiffness degradation measurements , 2000 .

[99]  C. Kassapoglou.  Fatigue Life Prediction of Composite Structures Under Constant Amplitude Loading , 2007 .