A REVIEW OF ELECTROLESS COATINGS ON NON-METALS: BATH CONDITIONS, PROPERTIES AND APPLICATIONS

[1]  Liang Zhong,et al.  A New Environmentally Friendly Non-Destructive Activation Process of Electroless Nickel Plating on Alumina Ceramics , 2023, SSRN Electronic Journal.

[2]  Yongjun Zhang,et al.  Electroless silver plating based on a new Ni–P activation process on magnesium titanate ceramic surfaces , 2022, Ceramics International.

[3]  Xuguang Liu,et al.  Electroless nickel plating on alumina ceramic activated by metallic nickel as electrocatalyst for oxygen evolution reaction , 2021 .

[4]  C. Singh,et al.  Development of amorphous Ni-P coating over API X70 steel for hydrogen barrier application , 2020 .

[5]  Hirotaka Sato,et al.  Metal-plastic hybrid 3D printing using catalyst-loaded filament and electroless plating , 2020 .

[6]  M. Barekat,et al.  Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate , 2020 .

[7]  J. Kweon,et al.  Radar-absorbing foam-based sandwich composite with electroless nickel-plated glass fabric , 2020 .

[8]  H. Uyama,et al.  Photooxidation of the ABS resin surface for electroless metal plating , 2020, Polymer.

[9]  Jing-Yu Chen,et al.  Electroless silver plating on modified fly ash particle surface , 2020 .

[10]  S. Pyo,et al.  Selective patterning on a flexible substrate using reduced graphene oxide-graphene and electroless deposited self-aligned silver conduction layers , 2020 .

[11]  Zhenming Chen,et al.  Preparation of polymer brush/Ni particle and its application in electroless copper plating on PA12 powder , 2020 .

[12]  Wang Jing,et al.  A facile process to fabricate metal coating on PET sheet: Preparation of highly active polymer brush/Ag particle and its application in electroless copper plating , 2020 .

[13]  G. Račiukaitis,et al.  Evaluation and optimisation of the SSAIL method for laser-assisted selective electroless copper deposition on dielectrics , 2020, Results in Physics.

[14]  Licheng Sun,et al.  Electroless Plating NiFeP Alloy on the Surface of Silicon Photoanode for Efficient Photoelectrochemical Water Oxidation. , 2020, ACS applied materials & interfaces.

[15]  J. Weng,et al.  Mixed Modification of the Surface Microstructure and Chemical State of Polyetheretherketone to Improve Its Antimicrobial Activity, Hydrophilicity, Cell Adhesion, and Bone Integration. , 2020, ACS biomaterials science & engineering.

[16]  Hongjun Lin,et al.  Inkjet printing assisted electroless Ni plating to fabricate nickel coated polypropylene membrane with improved performance. , 2020, Journal of colloid and interface science.

[17]  J. Orozco-Messana,et al.  Optimizing Electroless Plating of Ni–Mo–P Coatings Toward Functional Ceramics , 2020, Acta Metallurgica Sinica (English Letters).

[18]  Corrosion News , 2019, Materials and Corrosion.

[19]  M. Ghorbani,et al.  Fabrication and characterization of TiO2 deposited black electroless Ni-P solar absorber , 2019 .

[20]  Da‐Wei Xu,et al.  Facile electroless copper plating on diamond particles without conventional sensitization and activation , 2019, Advanced Powder Technology.

[21]  Masanari Takahashi,et al.  Cu-Sn alloy microtube assembly fabricated by electroless plating on polyester nonwoven fabric and its lithiation-delithiation performance , 2019, Applied Surface Science.

[22]  Yu Wang,et al.  A flexible, conductive and simple pressure sensor prepared by electroless silver plated polyester fabric , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[23]  A. Manna,et al.  Analysis on effect of electroless coated SiCp on mechanical properties of polymer matrix composites , 2019 .

[24]  M. Montazer,et al.  Click electroless plating of nickel nanoparticles on polyester fabric: Electrical conductivity, magnetic and EMI shielding properties , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[25]  Changsheng Xie,et al.  High-Adhesion Stretchable Electrode via Cross-Linking Intensified Electroless Deposition on a Biomimetic Elastomeric Micropore Film. , 2019, ACS applied materials & interfaces.

[26]  John Victor Christy,et al.  Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties , 2019, Journal of Alloys and Compounds.

[27]  Jingli Luo,et al.  Insights into the Interfacial Process in Electroless Ni-P Coating on Supercritical CO2 Transport Pipeline as Relevant to Carbon Capture and Storage. , 2019, ACS applied materials & interfaces.

[28]  Shuo Liu,et al.  Mechanism of ultrasonic treatment under nickel salt solution and its effect on electroless nickel plating of carbon fibers. , 2019, Ultrasonics sonochemistry.

[29]  J. Garno,et al.  Nickel Nanofilms Electrolessly Deposited on Organosilane Nanorings and Characterized by Contact Mode AFM Combined with Magnetic Sample Modulation , 2019, ACS Applied Nano Materials.

[30]  Dan Yu,et al.  High-performance flexible electromagnetic shielding polyimide fabric prepared by nickel-tungsten-phosphorus electroless plating , 2019, Journal of Alloys and Compounds.

[31]  S. Ju,et al.  Fabrication of Ni@SiC composite nanofibers by electrospinning and autocatalytic electroless plating techniques , 2019, Results in Physics.

[32]  Marc P.Y. Desmulliez,et al.  Direct metallisation of polyetherimide substrates by activation with different metals , 2019, Surface and Coatings Technology.

[33]  Yanhao Yu,et al.  Laser-Structured Graphene/Reduced Graphene Oxide Films towards Bio-Inspired Superhydrophobic Surfaces , 2019, Bulletin of the Chemical Society of Japan.

[34]  Jose Marques-Hueso,et al.  Selective Electroless Copper Deposition by Using Photolithographic Polymer/Ag Nanocomposite , 2019, IEEE Transactions on Electron Devices.

[35]  Si-yuan Cheng,et al.  A facile process to manufacture high performance copper layer on ceramic material via biomimetic modification and electroless plating , 2019, Composites Part B: Engineering.

[36]  K. Vinoy,et al.  Tailorable electromagnetic interference shielding using nickel coated glass fabric-epoxy composite with excellent mechanical property , 2018, Composites Communications.

[37]  Yongzheng Zhang,et al.  Effect of temperature on the friction and wear behavior of electroless Ni–P–MoS2–CaF2 self-lubricating composite coatings , 2018, Tribology International.

[38]  Hanxue Sun,et al.  Superwetting Monolithic Hollow‐Carbon‐Nanotubes Aerogels with Hierarchically Nanoporous Structure for Efficient Solar Steam Generation , 2018, Advanced Energy Materials.

[39]  H. Baharvandi,et al.  Electroless nickel-boron coating on B4C-Nano TiB2 composite powders , 2018, International Journal of Refractory Metals and Hard Materials.

[40]  B. C. Pai,et al.  Metallic composite coatings by electroless technique – a critical review , 2018, International Materials Reviews.

[41]  Wen‐Di Li,et al.  Selective Electroless Metallization of Micro- and Nanopatterns via Poly(dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications. , 2018, ACS applied materials & interfaces.

[42]  R. Shoja-Razavi,et al.  Influence of using electroless Ni-P coated WC-Co powder on laser cladding of stainless steel , 2018, Surface and Coatings Technology.

[43]  N. Xia,et al.  Electroless decoration of cellulose paper with nickel nanoparticles: A hybrid carbon fiber for supercapacitors , 2018, Materials Chemistry and Physics.

[44]  H. Hong,et al.  Preparation of nickel coating on ZTA particles by electroless plating , 2018, Ceramics International.

[45]  Xiaolin Zheng,et al.  Conformal Electroless Nickel Plating on Silicon Wafers, Convex and Concave Pyramids, and Ultralong Nanowires. , 2018, ACS applied materials & interfaces.

[46]  Yong Tang,et al.  Highly flexible and ultra-thin Ni-plated carbon-fabric/polycarbonate film for enhanced electromagnetic interference shielding , 2018, Carbon.

[47]  C. Fonseca,et al.  Mechanically robust silver coatings prepared by electroless plating on thermoplastic polyurethane , 2018, Applied Surface Science.

[48]  Z. Farhat,et al.  Recent advances in electroless-plated Ni-P and its composites for erosion and corrosion applications: a review , 2018, Emergent Materials.

[49]  M. Balazinski,et al.  Electroless nickel plating onto Plexiglas® through simple covalent grafting of vinylpyridine seed layer , 2018 .

[50]  Yaqing Liu,et al.  Flexible and conductive PP/EPDM/Ni coated glass fiber composite for efficient electromagnetic interference shielding , 2018, Journal of Materials Science: Materials in Electronics.

[51]  Hong-Ki Lee,et al.  Electroless Ni-P metallization on palladium activated polyacrylonitrile (PAN) fiber by using a drying process , 2018 .

[52]  K. Amini,et al.  Creation of Ni-B/Ni-P electroless coating on the WC particles without surface activator , 2018 .

[53]  A. Ashrafi,et al.  Characterisations of low phosphorus electroless Ni and composite electroless Ni-P-SiC coatings on A356 aluminium alloy , 2018 .

[54]  Guoguo Tan,et al.  Thin and Flexible Fe-Si-B/Ni-Cu-P Metallic Glass Multilayer Composites for Efficient Electromagnetic Interference Shielding. , 2017, ACS applied materials & interfaces.

[55]  D. Seifzadeh,et al.  Application of electroless Ni-P coating on magnesium alloy via CrO 3 /HF free titanate pretreatment , 2017 .

[56]  Jiaojiao Wang,et al.  An electroless plating and planetary ball milling process for mechanical properties enhancement of bulk CNTs/Cu composites , 2017 .

[57]  M. I. Ansari,et al.  Enhancement of surface properties with influence of bath pH on electroless Ni-P-ZnO/Al2O3 nano-composite deposits for defence applications , 2017 .

[58]  D. Therriault,et al.  Synthesis of Highly Conductive, Uniformly Silver-Coated Carbon Nanofibers by Electroless Deposition. , 2017, ACS applied materials & interfaces.

[59]  Chun-Gon Kim,et al.  Fabrication of a thin and lightweight microwave absorber containing Ni-coated glass fibers by electroless plating , 2017 .

[60]  J. Ru,et al.  Modification of ZTA particles with Ni coating by electroless deposition , 2017 .

[61]  L. Guohao,et al.  Improving the electromagnetic shielding of nickel/polyaniline coated polytrimethylene-terephthalate knitted fabric by optimizing the electroless plating conditions , 2017 .

[62]  Mohamed K. Hassan,et al.  Indentation and erosion behavior of electroless Ni-P coating on pipeline steel , 2017 .

[63]  Moon J. Kim,et al.  Interfacial structure evolution of Ti-coated diamond particle reinforced Al matrix composite produced by gas pressure infiltration , 2017 .

[64]  Chien‐Hung Lin,et al.  The fabrication and characteristics of electroless nickel and immersion Au-polytetrafluoroethylene composite coating on aluminum alloy 5052 as bipolar plate , 2017 .

[65]  S. Jayabal,et al.  Development of Electroless Ni-P Coatings on Sisal Fiber , 2017 .

[66]  M. Shivakumar,et al.  Electroless deposition of nanosized nickel over graphite substrate with better coating coverage and catalytic activity for fuel cell application , 2017, Journal of Applied Electrochemistry.

[67]  Jun Tan,et al.  Effect of laser surface texturing depth on the adhesion of electroless plated nickel coating on alumina , 2017 .

[68]  Z. A. Noorden,et al.  Synthesis and Characterizations of Electroless Oil Palm Shell Based-Activated Carbon/Nickel Oxide Nanocomposite Electrodes for Supercapacitor Applications , 2017 .

[69]  Xufeng Zhou,et al.  Electroless Ni-plated graphene for tensile strength enhancement of copper , 2017 .

[70]  T. Bessho,et al.  Layer by layer electroless deposition: An efficient route for preparing adhesion-enhanced metallic coatings on plastic surfaces , 2016 .

[71]  K. Tashiro,et al.  Metallisation on ABS plastics using fine-bubbles low ozonated water complying with REACH regulations , 2016 .

[72]  A. Kobets,et al.  Palladium catalyst synthesis through sol-gel processing for electroless nickel deposition on glass , 2016 .

[73]  T. Hashimoto,et al.  Application of supercritical carbon dioxide in catalyzation and Ni-P electroless plating of nylon 6,6 textile , 2016 .

[74]  Arvind Kumar,et al.  Studies on electroless nickel polyalloy coatings over carbon fibers/CFRP composites , 2016 .

[75]  Huiyu Chen,et al.  Conductive glass fabrics@nickel composites prepared by a facile electroless deposition method , 2016 .

[76]  Jianguo Liu,et al.  Higher-resolution selective metallization on alumina substrate by laser direct writing and electroless plating , 2016 .

[77]  Hang Zhao,et al.  Comparative study of electroless nickel film on different organic acids modified cuprammonium fabric (CF) , 2016 .

[78]  Weiqi Wang,et al.  Electroless silver plating on PET fabric initiated by in situ reduction of polyaniline , 2015 .

[79]  Dan Yu,et al.  Preparation of electroless silver plating on aramid fiber with good conductivity and adhesion strength , 2015 .

[80]  Yue Ma,et al.  Pretreatment and deposition process of electroless Ni plating on polyimide film for electronic field applications , 2015 .

[81]  K. Rhee,et al.  Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites , 2015 .

[82]  J. J. P. Pérez Bueno,et al.  Novel green process to modify ABS surface before its metallization: optophysic treatment , 2015, Journal of Coatings Technology and Research.

[83]  D. Brabazon,et al.  Electroless deposition (ED) of copper coating on micron-sized SiC particles , 2014 .

[84]  K. Akamatsu,et al.  Electroless nickel plating on polymer particles. , 2014, Journal of colloid and interface science.

[85]  D. Brabazon,et al.  Effect of electroless coating parameters and ceramic particle size on fabrication of a uniform Ni–P coating on SiC particles , 2014 .

[86]  Huiyu Chen,et al.  Silver-coated glass fibers prepared by a simple electroless plating technique , 2014, Journal of Materials Science: Materials in Electronics.

[87]  Jie Li,et al.  Al/Pb lightweight grids prepared by molten salt electroless plating for application in lead-acid batteries , 2014 .

[88]  Zengling Wang,et al.  Surface modification of ABS by photocatalytic treatment for electroless copper plating , 2014 .

[89]  S. Faraji,et al.  An investigation on electroless Cu-P composite coatings with micro and nano-SiC particles , 2014 .

[90]  W. Sha,et al.  Electroless nickel, alloy, composite and nano coatings – A critical review , 2013 .

[91]  Y. Ishii,et al.  Electroless Deposited Gold Nanoparticles on Glass Plates as Sensors for Measuring the Dielectric Constant of Solutions , 2013 .

[92]  M. H. Paydar,et al.  Electroless deposition of Ni-W-P-B4C nanocomposite coating on AZ91D magnesium alloy and investigation on its properties , 2013 .

[93]  C. Zhang,et al.  H2 sensors based on WO3 thin films activated by platinum nanoparticles synthesized by electroless process , 2013 .

[94]  Z. Zalevsky,et al.  Electroless deposition of silver thin films on gold nanoparticles catalyst for micro and nanoelectronics applications , 2012 .

[95]  K. Yan,et al.  Superhydrophilicity/superhydrophobicity of nickel micro-arrays fabricated by electroless deposition on an etched porous aluminum template , 2012 .

[96]  Zeng Shu,et al.  Environment-friendly Pd free surface activation technics for ABS surface , 2012 .

[97]  Yihan Wang,et al.  Study of a pre-treatment process for electroless copper plating on ceramics , 2011 .

[98]  A. Gurumoorthy,et al.  Experiments on the Peeling of Copper Coating Deposited Via the Electroless Method on Glass Beads , 2011, International Journal of Electrochemical Science.

[99]  B. Niroumand,et al.  Electroless composite coating of Ni-P-carbon nanotubes on magnesium powder , 2011 .

[100]  Haibing Liu,et al.  Electroless nickel plating on APTHS modified wood veneer for EMI shielding , 2010 .

[101]  M. Schenker,et al.  Electroless plating of ultrathin films and mirrors of platinum nanoparticles onto polymers, metals, and ceramics. , 2010, ACS applied materials & interfaces.

[102]  Yinxiang Lu,et al.  Fabrication of high adhesive silver-coated PET electrode challenged by simulated body fluid (SBF) soaking , 2010 .

[103]  Haibing Liu,et al.  A new process for preparing conducting wood veneers by electroless nickel plating , 2010 .

[104]  M. Martínez,et al.  Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma , 2009 .

[105]  M. Balasubramanian,et al.  Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites , 2009 .

[106]  B. Ramamoorthy,et al.  Novel approaches on the study of wear performance of electroless Ni–P/diamond composite deposites , 2009 .

[107]  Dapeng Li,et al.  Electroless copper deposition on aluminum-seeded ABS plastics , 2008, Journal of Materials Science.

[108]  Li Wang,et al.  Studies of electroless Ni–Co–P ternary alloy on glass fibers , 2007 .

[109]  A. Ureña,et al.  Electroless nickel coated short carbon fibres in aluminium matrix composites , 2007 .

[110]  L. Zhen,et al.  Microstructure and magnetic properties of SiC/Co composite particles prepared by electroless plating , 2006 .

[111]  V. Agarwala,et al.  Development of copper coatings on ceramic powder by electroless technique , 2006 .

[112]  J. Badyal,et al.  Electroless metallization onto pulsed plasma deposited poly(4-vinylpyridine) surfaces. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[113]  K. Suh,et al.  Synthesis of monodisperse nickel‐coated polymer particles by electroless plating method utilizing functional polymeric ligands , 2006 .

[114]  Daisuke Ishii,et al.  Pd−Promoted Ni−P Electroless Deposition on a Hydrogen-Bonded Molecular Surface of a Supramolecular Fibrous Template , 2006 .

[115]  L. Teixeira,et al.  Surface conditioning of ABS for metallization without the use of chromium baths , 2005 .

[116]  Qiuyu Zhang,et al.  Electroless nickel plating on hollow glass microspheres , 2005 .

[117]  J. Kovács,et al.  The electroless deposition of nickel on SiC particles for aluminum matrix composites , 2004 .

[118]  Yucong Wang,et al.  Friction and wear behavior of electroless Ni-based CNT composite coatings , 2003 .

[119]  S. Seal,et al.  Electroless Copper Coating of Zirconia Utilizing Palladium Catalyst , 2003 .

[120]  S. F. Moustafa,et al.  Copper matrix SiC and Al2O3 particulate composites by powder metallurgy technique , 2002 .

[121]  S. Yen,et al.  Effects of additives and chelating agents on electroless copper plating , 2001 .

[122]  B. Luan,et al.  Chemical surface preparation for metallization of stereolithography polymers , 2000 .

[123]  Su-Jien Lin,et al.  Processing copper and silver matrix composites by electroless plating and hot pressing , 1999 .

[124]  J. Yao,et al.  Electroless copper plating on a glass substrate coated with ZnO film under UV illumination , 1999 .

[125]  J. Lin,et al.  The effect of electroless nickel film on the tribological characteristics of alumina coatings , 1997 .

[126]  A. Brenner,et al.  Deposition of nickel and cobalt by chemical reduction , 1947 .

[127]  H. Aghajani,et al.  An investigation on electroless nickel coating on yttria stabilized zirconia nanoparticles via single step surface activation methods , 2019, Thin Solid Films.

[128]  R. Narain,et al.  Electroless Metallic Coating on Plastic Parts Produced by Rapid Prototyping Technique , 2017 .

[129]  Prasanta Sahoo,et al.  Electroless Nickel-Phosphorus Composite Coatings: A Review , 2016, Int. J. Manuf. Mater. Mech. Eng..

[130]  W. Tseng,et al.  Electroless nickel metallization to prepare SiO2–Ni composite particles via polyelectrolytes route , 2015 .

[131]  S. Sankaran,et al.  Electroless nickel plating of arc discharge synthesized carbon nanotubes for metal matrix composites , 2015 .

[132]  M. Roy.  Surface Engineering for Enhanced Performance against Wear , 2013 .

[133]  P. Kohl,et al.  Electroless Deposition of Copper on Organic and Inorganic Substrates Using a Sn/Ag Catalyst , 2012 .

[134]  Guang-hong Zhou,et al.  Structure and Mechanical Properties of Ni-P-Nano Al2 O3 Composite Coatings Synthesized by Electroless Plating , 2008 .

[135]  M. Ebrahimian-Hosseinabadi,et al.  WEAR BEHAVIOR OF ELECTROLESS NI-P-B4C COMPOSITE COATINGS , 2006 .

[136]  Yuan Hai-long.  Electroless plating of carbon nanotubes with silver , 2004 .

[137]  M. Sasaki,et al.  Cure-adhesion of rubber to electroless Pd–P alloy deposit: effect of P content in alloy , 2001 .

[138]  W. Goldie.  Metallic coating of plastics , 1968 .

[139]  J. M. Bremner.  Nickel Plating by Chemical Reduction , 1948, Nature.