Analysis of Water Management in Proton Exchange Membrane Fuel Cells

A two-dimensional, steady-state, isothermal water-management model for a complete proton ex- change membrane fuel cell (PEMFC) was developed. The model includes the transport in the diffusion layer and the proton exchange membrane (PEM) with a pseudo-homogeneous model for the cathode catalyst layer. The predicted fuel cell performance with variable cathode porosities compares well with experimental results. The model is then used to investigate the effects of some structural parameters, such as the rib size, the interdigitated flow field, and various operating conditions including the gas flow rate, the cell temperature and pressure, humidification, and the relative humidity at the inlet. Water management is best achieved by tuning the anode operating conditions.

[1]  T. Fuller,et al.  Influence of rib spacing in proton-exchange membrane electrode assemblies , 1996 .

[2]  T. Springer,et al.  Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy , 1996 .

[3]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[4]  Hongtan Liu,et al.  A two-phase flow and transport model for the cathode of PEM fuel cells , 2002 .

[5]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[6]  Hongtan Liu,et al.  Modelling of performance of PEM fuel cells with conventional and interdigitated flow fields , 1999 .

[7]  Xianguo Li,et al.  Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell , 1999 .

[8]  D. Wilkinson,et al.  Anode water removal: A water management and diagnostic technique for solid polymer fuel cells , 1995 .

[9]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[10]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[11]  T. Nguyen,et al.  Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells , 1998 .

[12]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[13]  T. Fuller,et al.  Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells , 1993 .

[14]  T. Springer,et al.  Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells , 1993 .

[15]  F. Büchi,et al.  Investigation of the Transversal Water Profile in Nafion Membranes in Polymer Electrolyte Fuel Cells , 2001 .

[16]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[17]  A. Kornyshev,et al.  Phenomenological theory of electro-osmotic effect and water management in polymer electrolyte proton-conducting membranes , 1998 .

[18]  T. Nguyen,et al.  Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors , 1999 .

[19]  T. Nguyen,et al.  An Along‐the‐Channel Model for Proton Exchange Membrane Fuel Cells , 1998 .

[20]  Trung Van Nguyen,et al.  A Two-Dimensional, Two-Phase, Multicomponent, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell Using Conventional Gas Distributors , 2001 .