Large signal design of broadband monolithic microwave frequency dividers and phase-locked oscillators

This paper presents a design method for phaselocked devices such as frequency dividers or injection-locked oscillators. The method requires a full nonlinear analysis of the circuit. This analysis relies upon harmonic balance techniques and is suitable for monolithic circuits simulation. First, a modified formulation of the general harmonic balance equation is proposed which includes the presence of probes. These probes allow us to suppress the degenerated solution of the HB equation in autonomous cases. Moreover, a global stability analysis of phaselocked regimes is carried out. It provides invaluable information on the nonlinear behavior of the device. In particular, synchronization bandwidths as well as power ranges for which the circuit can be synchronized are obtained from the stability loci drawn in the parameter space. All these features have been used to design a broadband monolithic frequency divider, and the simulated and experimental results have been compared with very good accuracy. Therefore, the method proposed is a very useful tool for the design of potentially unstable circuits. >

[1]  Jean-Christophe Nallatamby,et al.  A general program for steady state, stability, and FM noise analysis of microwave oscillators , 1990, IEEE International Digest on Microwave Symposium.

[2]  L. Gustafsson,et al.  On the Use of Describing Functions in the Study of Nonlinear Active Microwave Circuits , 1972 .

[3]  R. Knoechel,et al.  Noise and Transfer Properties of Harmonically Synchronized Oscillators , 1978, 1978 IEEE-MTT-S International Microwave Symposium Digest.

[4]  Edouard Ngoya,et al.  Efficient algorithms for spectra calculations in nonlinear microwave circuits simulators , 1990 .

[5]  R. Harrison,et al.  A Broad-Band Frequency Divider Using Microwave Varactors , 1977 .

[6]  M. Steer,et al.  Nonlinear circuit analysis using the method of harmonic balance—A review of the art. Part I. Introductory concepts , 1991 .

[7]  R. Quere,et al.  Large signal design of broadband monolithic microwave frequency dividers , 1992, 1992 IEEE Microwave Symposium Digest MTT-S.

[8]  G. Iooss,et al.  Elementary stability and bifurcation theory , 1980 .

[9]  K. Kurokawa,et al.  Injection locking of microwave solid-state oscillators , 1973 .

[10]  Marc Camiade,et al.  Optimum Design of Non Linear Power FET Amplifiers , 1987, 1987 IEEE MTT-S International Microwave Symposium Digest.

[11]  Michael B. Steer,et al.  Computer-aided analysis of free-running microwave oscillators , 1991 .

[12]  Alberto L. Sangiovanni-Vincentelli,et al.  Simulation of Nonlinear Circuits in the Frequency Domain , 1986, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[13]  E. Calandra,et al.  Necessary and sufficient conditions for frequency entrainment of quasi-sinusoidal injection-synchronized oscillators , 1986 .

[14]  D. Hente,et al.  Frequency domain continuation method for the analysis and stability investigation of nonlinear microwave circuits , 1986 .

[15]  A. Neri,et al.  State of the art and present trends in nonlinear microwave CAD techniques , 1988 .

[16]  Alessandra Costanzo,et al.  State-of-the-art harmonic-balance simulation of forced nonlinear microwave circuits by the piecewise technique , 1992 .

[17]  V. Rizzoli,et al.  General Stability Analysis of Periodic Steady-State Regimes in Nonlinear Microwave Circuits , 1985 .

[18]  C. Rauscher,et al.  Regenerative Frequency Division with a GaAs FET , 1984 .

[19]  Michael B. Steer,et al.  Nonlinear circuit analysis using the method of harmonic balance—a review of the art. II. Advanced concepts , 1991 .

[20]  G.H.B. Hansson,et al.  Stability Criteria for Phase-Locked Oscillators , 1972 .

[21]  Alessandra Costanzo,et al.  Harmonic-balance analysis of microwave oscillators with automatic suppression of degenerate solution , 1992 .