Effects of system parameters on making aluminum alloy lotus.

In the present article, stable biomimetic superhydrophobic surfaces on aluminum alloy are obtained by wet chemical etching following modification with crosslinked silicone elastomer, perfluorononane (C9F20), and perfluoropolyether (PFPE), respectively. The formation and structure of superhydrophobic surfaces were characterized by means of scanning electron microscopy (SEM), water contact angle measurement, Fourier transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The effects of surface roughness resulted from the etching time, and the concentration of NaOH aqueous solution on the superhydrophobicity of the surfaces have been discussed in detail. The optimal surface roughness of starting material is about 0.05-0.5 microm and the resulting surface roughness should be controlled between 2.7 and 5.8 microm in order to realize the superhydrophobicity on aluminum alloy; if the concentration of NaOH aqueous solution is about 4 wt%, the best treatment time is between 2 and 4 h to form a surface roughness changing from 2.7 to 5.8 microm. The trapped air with the binary structure plays a key role in fabricating superhydrophobic surface on aluminum alloy. In other words, the unusual structure on the surface, which has a binary structure consisted of microprotrusions and nanoparticles, plays a very vital role in constructing of the stable biomimetic superhydrophobic surface on aluminum alloy.

[1]  Akira Fujishima,et al.  Transparent Superhydrophobic Thin Films with Self-Cleaning Properties , 2000 .

[2]  Neelesh A Patankar,et al.  Anisotropy in the wetting of rough surfaces. , 2005, Journal of colloid and interface science.

[3]  W. Xu,et al.  Rose-like superhydrophobic surface based on conducting dmit salt , 2006 .

[4]  Glen McHale,et al.  Dual‐Scale Roughness Produces Unusually Water‐Repellent Surfaces , 2004 .

[5]  Zhiguang Guo,et al.  Stable biomimetic super-hydrophobic engineering materials. , 2005, Journal of the American Chemical Society.

[6]  Neelesh A. Patankar,et al.  On the Modeling of Hydrophobic Contact Angles on Rough Surfaces , 2003 .

[7]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[8]  Jin Zhai,et al.  Reversible super-hydrophobicity to super-hydrophilicity transition of aligned ZnO nanorod films. , 2004, Journal of the American Chemical Society.

[9]  I. Saguy,et al.  Contact angle measurement on rough surfaces. , 2004, Journal of colloid and interface science.

[10]  Baitai Qian,et al.  Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[11]  F. Shi,et al.  Reversible pH‐Responsive Surface: From Superhydrophobicity to Superhydrophilicity , 2005 .

[12]  Tongxi Yu,et al.  Preparation and characterization of an ultrahydrophobic surface based on a stearic acid self-assembled monolayer over polyethyleneimine thin films , 2003 .

[13]  Yasukiyo Ueda,et al.  The Lowest Surface Free Energy Based on −CF3 Alignment , 1999 .

[14]  D. Fischer,et al.  Water-based non-stick hydrophobic coatings , 1994, Nature.

[15]  H. Fuchs,et al.  Nanoscopic channel lattices with controlled anisotropic wetting , 2000, Nature.

[16]  Lei Jiang,et al.  Bioinspired surfaces with special wettability. , 2005, Accounts of chemical research.

[17]  H. Erbil,et al.  Transformation of a Simple Plastic into a Superhydrophobic Surface , 2003, Science.

[18]  W. Barthlott,et al.  Purity of the sacred lotus, or escape from contamination in biological surfaces , 1997, Planta.

[19]  H. Yan,et al.  Environmentally stable super water-repellent poly(alkylpyrrole) films. , 2005, Angewandte Chemie.

[20]  Jin Zhai,et al.  Creation of a superhydrophobic surface from an amphiphilic polymer. , 2003, Angewandte Chemie.

[21]  G McHale,et al.  Wetting and wetting transitions on copper-based super-hydrophobic surfaces. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[22]  David Quéré,et al.  Rough ideas on wetting , 2002 .

[23]  Zhihong Zhao,et al.  Effects of hydraulic pressure on the stability and transition of wetting modes of superhydrophobic surfaces. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[24]  C D Frisbie,et al.  Imaging of features on surfaces by condensation figures. , 1993, Science.

[25]  Gareth H. McKinley,et al.  Superhydrophobic Carbon Nanotube Forests , 2003 .

[26]  G M Whitesides,et al.  Manipulation of the Wettability of Surfaces on the 0.1- to 1 -Micrometer Scale Through Micromachining and Molecular Self-Assembly , 1992, Science.

[27]  Yanlin Song,et al.  Super-hydrophobic surface of aligned polyacrylonitrile nanofibers. , 2002, Angewandte Chemie.

[28]  H. Murase,et al.  Characterization of molecular interfaces in hydrophobic systems , 1997 .

[29]  F. Shi,et al.  Combining a Layer‐by‐Layer Assembling Technique with Electrochemical Deposition of Gold Aggregates to Mimic the Legs of Water Striders , 2005 .

[30]  Heihachi Murase,et al.  Interactions between heterogeneous surfaces of polymers and water , 1994 .

[31]  A. Marmur,et al.  The exponential power law: partial wetting kinetics and dynamic contact angles , 2004 .

[32]  M. Kulkarni,et al.  Transport of liquids using superhydrophobic aerogels. , 2005, Journal of colloid and interface science.

[33]  Yuan-Cheng Du,et al.  Optical studies on the deposition of carbon nitride films by laser ablation , 1997 .

[34]  George M. Whitesides,et al.  Extending Microcontact Printing as a Microlithographic Technique , 1997 .