Piezoelectric Vibration-Type Tactile Sensor Using Elasticity and Viscosity Change of Structure

We propose a new tactile sensor utilizing piezoelectric vibration. This tactile sensor has a high sensitivity, wide measurement range, pressure resistance, flexibility, and self-sensing function. This tactile sensor comprises two piezoelectric materials. One is used for the vibration of the sensor element and the other is used for the measurement of the change in mechanical impedance induced by an external force. We achieved the wide measurement range by implementing two ideas. One was to apply the external force to the sensor element through an elastic body and the other was to use two or more modes of vibration. Moreover, for the elastic body, it is preferable to use a material whose elasticity and viscosity are easily changed by an external force, such as a gel. In this study, first, this tactile sensor was analyzed, and then its characteristics were derived. The analytical results qualitatively corresponded to the experimental results. Next, a prototype tactile sensor was fabricated and evaluated. The evaluation results showed that this tactile sensor can measure a pressure of 2.5 Pa or less and a pressure of 10 kPa or more and its pressure resistance is 1 MPa or more.

[1]  T. Ikeda.  Fundamentals of piezoelectricity , 1990 .

[2]  Aparecido Augusto de Carvalho,et al.  A strain gauge tactile sensor for finger-mounted applications , 2002, IEEE Trans. Instrum. Meas..

[3]  Fumihito Arai,et al.  Touch sensor for micromanipulation with pipette using lead-free (K,Na)(Nb,Ta)O3 piezoelectric ceramics , 2005 .

[4]  Chengkuo Lee,et al.  Deflection detection and feedback actuation using a self‐excited piezoelectric Pb(Zr,Ti)O3 microcantilever for dynamic scanning force microscopy , 1996 .

[5]  M. Shimojo,et al.  A tactile sensor sheet using pressure conductive rubber with electrical-wires stitched method , 2004, IEEE Sensors Journal.

[6]  Masayuki Inaba,et al.  Development of soft and distributed tactile sensors and the application to a humanoid robot , 2002, Adv. Robotics.

[7]  Mark Lee,et al.  Review Article Tactile sensing for mechatronics—a state of the art survey , 1999 .

[8]  Haruhisa Kawasaki,et al.  Dexterous anthropomorphic robot hand with distributed tactile sensor: Gifu hand II , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[9]  F. Castelli.  An integrated tactile-thermal robot sensor with capacitive tactile array , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[10]  J. Dargahi.  An Endoscopic and Robotic Tooth-like Compliance and Roughness Tactile Sensor , 2002 .

[11]  M. Ohka,et al.  Sensing Characteristics of an Optical Three-Axis Tactile Sensor Under Combined Loading. , 1999 .

[12]  Fumihito Arai,et al.  Structure design of micro touch sensor array , 2003 .

[13]  Naoki Kawakami,et al.  Evaluation of a vision-based tactile sensor , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[14]  Tadatomo Suga,et al.  Scanning Force Microscope Using Piezoelectric Excitation and Detection , 1995 .

[15]  Kazuo Tanaka,et al.  A unified approach to controlling chaos via an LMI-based fuzzy control system design , 1998 .

[16]  Fumihito Arai,et al.  High sensitive touch sensor with piezoelectric thin film for pipetting works under microscope , 2006 .

[17]  Shinichi Hirai,et al.  Elastic Model of Deformable Fingertip for Soft-Fingered Manipulation , 2006, IEEE Transactions on Robotics.