Assessment of flamelet manifolds for turbulent flame-wall interactions in large-eddy simulations

[1]  H. Bockhorn,et al.  Flame-vortex interaction during turbulent side-wall quenching and its implications for flamelet manifolds , 2022, Proceedings of the Combustion Institute.

[2]  H. Bockhorn,et al.  Combined effects of heat loss and curvature on turbulent flame-wall interaction in a premixed dimethyl ether/air flame , 2022, Proceedings of the Combustion Institute.

[3]  A. Dreizler,et al.  A manifold-based reduction method for side-wall quenching considering differential diffusion effects and its application to a laminar lean dimethyl ether flame , 2022, International Journal of Heat and Fluid Flow.

[4]  C. Hasse,et al.  Model reduction on the fly: Simultaneous identification and application of reduced kinetics for the example of flame-wall interactions , 2022, Proceedings of the Combustion Institute.

[5]  M. Klein,et al.  A comparison between head-on quenching of stoichiometric methane-air and hydrogen-air premixed flames using Direct Numerical Simulations , 2022, International Journal of Heat and Fluid Flow.

[6]  H. Bockhorn,et al.  Turbulent flame-wall interaction of premixed flames using Quadrature-based Moment Methods (QbMM) and tabulated chemistry: An a priori analysis , 2022, International Journal of Heat and Fluid Flow.

[7]  M. Klein,et al.  Influence of thermal wall boundary condition on scalar statistics during flame-wall interaction of premixed combustion in turbulent boundary layers , 2021, International Journal of Heat and Fluid Flow.

[8]  V. Raman,et al.  Large eddy simulation of premixed turbulent combustion using a non-adiabatic, strain-sensitive flamelet approach , 2021 .

[9]  R. Barlow,et al.  Detailed assessment of the thermochemistry in a side-wall quenching burner by simultaneous quantitative measurement of CO2, CO and temperature using laser diagnostics , 2021, Combustion and Flame.

[10]  R. Barlow,et al.  Classification of flame prehistory and quenching topology in a side-wall quenching burner at low-intensity turbulence by correlating transport effects with CO2, CO and temperature , 2021, Combustion and Flame.

[11]  R. Gordon,et al.  Turbulent flame-wall interactions for flames diluted by hot combustion products , 2021 .

[12]  C. Hasse,et al.  Simulation of side-wall quenching of laminar premixed flames with manifold-based reduced kinetic models implemented in generalised coordinates , 2021 .

[13]  Lipo Wang,et al.  Effects of the cold wall boundary on the flame structure and flame speed in premixed turbulent combustion , 2020 .

[14]  M. Klein,et al.  Scalar Gradient and Strain Rate Statistics in Oblique Premixed Flame–Wall Interaction Within Turbulent Channel Flows , 2020, Flow, Turbulence and Combustion.

[15]  A. Sadiki,et al.  Numerical Investigation of Local Heat-Release Rates and Thermo-Chemical States in Side-Wall Quenching of Laminar Methane and Dimethyl Ether Flames , 2020, Flow, Turbulence and Combustion.

[16]  A. Dreizler,et al.  Effect of Flame-Wall Interaction on Local Heat Release of Methane and DME Combustion in a Side-Wall Quenching Geometry , 2020 .

[17]  Philip de Goey,et al.  QFM: quenching flamelet-generated manifold for modelling of flame–wall interactions , 2020, Combustion Theory and Modelling.

[18]  R. Gordon,et al.  Unsteady flame–wall interaction: Impact on CO emission and wall heat flux , 2019, Combustion and Flame.

[19]  J. Janicka,et al.  Investigation of the Turbulent Near Wall Flame Behavior for a Sidewall Quenching Burner by Means of a Large Eddy Simulation and Tabulated Chemistry , 2018, Fluids.

[20]  N. Chakraborty,et al.  Flow topology distribution in head-on quenching of turbulent premixed flame: A Direct Numerical Simulation analysis , 2018, Fuel.

[21]  A. Sadiki,et al.  Large Eddy Simulation with tabulated chemistry of an experimental sidewall quenching burner , 2018, International Journal of Heat and Fluid Flow.

[22]  Lipo Wang,et al.  Analysis of the flame–wall interaction in premixed turbulent combustion , 2018, Journal of Fluid Mechanics.

[23]  J. Janicka,et al.  Laminar near-wall combustion: Analysis of tabulated chemistry simulations by means of detailed kinetics , 2018 .

[24]  A. Dreizler,et al.  Wall heat fluxes and CO formation/oxidation during laminar and turbulent side-wall quenching of methane and DME flames , 2018 .

[25]  Johannes Janicka,et al.  3D Numerical Simulation of a Laminar Experimental SWQ Burner with Tabulated Chemistry , 2018 .

[26]  J. Janicka,et al.  Numerical analysis of laminar methane–air side-wall-quenching , 2017 .

[27]  J. Janicka,et al.  Sidewall quenching of atmospheric laminar premixed flames studied by laser-based diagnostics , 2017 .

[28]  N. Chakraborty,et al.  Turbulent scalar flux transport in head-on quenching of turbulent premixed flames: a direct numerical simulations approach to assess models for Reynolds averaged Navier Stokes simulations , 2017 .

[29]  ten Jhm Jan Thije Boonkkamp,et al.  State-of-the-art in premixed combustion modeling using flamelet generated manifolds , 2016 .

[30]  Jiawei Lai,et al.  Effects of Lewis Number on Head on Quenching of Turbulent Premixed Flames: A Direct Numerical Simulation Analysis , 2016 .

[31]  B. Coriton,et al.  LES flamelet-progress variable modeling and measurements of a turbulent partially-premixed dimethyl ether jet flame , 2015 .

[32]  A. Dreizler,et al.  Transient flame-wall interactions: experimental analysis using spectroscopic temperature and CO concentration measurements , 2014 .

[33]  A. Sadiki,et al.  LES of Premixed Methane Flame Impinging on the Wall Using Non-adiabatic Flamelet Generated Manifold (FGM) Approach , 2014 .

[34]  J. Janicka,et al.  Heat Transfer Modeling in the Context of Large Eddy Simulation of Premixed Combustion with Tabulated Chemistry , 2013 .

[35]  Van Oijen,et al.  Numerical Simulations of a Premixed Turbulent Confined Jet Flame Using the Flamelet Generated Manifold Approach With Heat Loss Inclusion , 2013 .

[36]  B. Meyer,et al.  An abstraction layer for efficient memory management of tabulated chemistry and flamelet solutions , 2013 .

[37]  C. Law,et al.  Hierarchical and comparative kinetic modeling of laminar flame speeds of hydrocarbon and oxygenated fuels , 2012 .

[38]  M. Aigner,et al.  Experimental Analysis of Confined Jet Flames by Laser Measurement Techniques , 2012 .

[39]  J. Janicka,et al.  LES modeling of premixed combustion using a thickened flame approach coupled with FGM tabulated chemistry , 2011 .

[40]  F. Nicoud,et al.  Using singular values to build a subgrid-scale model for large eddy simulations , 2011 .

[41]  E. Hawkes,et al.  Turbulent flame–wall interaction: a direct numerical simulation study , 2010, Journal of Fluid Mechanics.

[42]  H. Pitsch,et al.  Modeling of radiation and nitric oxide formation in turbulent nonpremixed flames using a flamelet/progress variable formulation , 2008 .

[43]  U. Maas,et al.  The extension of the ILDM concept to reaction–diffusion manifolds , 2007 .

[44]  Nasser Darabiha,et al.  Modelling non-adiabatic partially premixed flames using flame-prolongation of ILDM , 2003 .

[45]  C. Meneveau,et al.  A power-law flame wrinkling model for LES of premixed turbulent combustion Part I: non-dynamic formulation and initial tests , 2002 .

[46]  C. Rutland,et al.  Wall heat flux in turbulent premixed reacting flow , 2002 .

[47]  N. Peters,et al.  Unsteady modelling of a piloted methane/air jet flame based on the Eulerian particle flamelet model , 2001 .

[48]  Van Oijen,et al.  Modelling of Premixed Laminar Flames using Flamelet-Generated Manifolds , 2000 .

[49]  F. Ducros,et al.  A thickened flame model for large eddy simulations of turbulent premixed combustion , 2000 .

[50]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[51]  Ulrich Maas,et al.  Simplifying chemical kinetics: Intrinsic low-dimensional manifolds in composition space , 1992 .

[52]  A. Dreizler,et al.  Experimental investigation of flame surface density and mean reaction rate during flame–wall interaction , 2017 .

[53]  E. Ranzi,et al.  Skeletal mechanism reduction through species-targeted sensitivity analysis , 2016 .

[54]  A. Dreizler,et al.  Advanced laser diagnostics for an improved understanding of premixed flame-wall interactions , 2015 .

[55]  F. Proch,et al.  Modeling heat loss effects in the large eddy simulation of a model gas turbine combustor with premixed flamelet generated manifolds , 2015 .

[56]  F. Nicoud,et al.  A DYNAMIC PROCEDURE FOR ADVANCED SUBGRID-SCALE MODELS AND WALL-BOUNDED FLOWS , 2011, Proceeding of Seventh International Symposium on Turbulence and Shear Flow Phenomena.

[57]  Luc Vervisch,et al.  Multidimensional flamelet-generated manifolds for partially premixed combustion , 2010 .

[58]  Nasser Darabiha,et al.  Liminar premixed hydrogen/air counterflow flame simulations using flame prolongation of ILDM with differential diffusion , 2000 .