The dynamics and control of fluctuating pressure loads in the reattachment region of a supersonic free shear layer

The primary aim is to investigate the mechanisms which cause the unsteady wall-pressure fluctuations in shock wave turbulent shear layer interactions. The secondary aim is to find means to reduce the magnitude of the fluctuating pressure loads by controlling the unsteady shock motion. The particular flow proposed for study is the unsteady shock wave interaction formed in the reattachment zone of a separated supersonic flow. Similar flows are encountered in many practical situations, and they are associated with high levels of fluctuating wall pressure. Wall pressure fluctuations were measured in the reattachment region of the supersonic free shear layer. The free shear layer was formed by the separation of a Mach 2.9 turbulent boundary layer from a backward facing step. Reattachment occurred on a 20 deg ramp. By adjusting the position of the ramp, the base pressure was set equal to the freestream pressure, and the free shear layer formed in the absence of a separation shock. An array of flush-mounted, miniature, high-frequency pressure transducers was used to make multichannel measurements of the fluctuating wall pressure in the vicinity of the reattachment region. Contrary to previous observations of this flow, the reattachment region was found to be highly unsteady, and the pressure fluctuations were found to be significant. The overall behavior of the wall pressure loading is similar in scale and magnitude to the unsteadiness of the wall pressure field in compression ramp flows at the same Mach number. Rayleigh scattering was used to visualize the instantaneous shock structure in the streamwise and spanwise direction. Spanwise wrinkles on the order of half the boundary layer thickness were observed.

[1]  D. Dolling.  Unsteadiness of the shock wave structure in attached and separated compression ramp flowfields , 1983 .

[2]  A. L. Addy,et al.  A study of compressible turbulent reattaching free shear layers , 1985 .

[3]  L. Brusniak,et al.  Separation shock motion in fin, cylinder, and compression ramp - Induced turbulent interactions , 1987 .

[4]  T. R. Creel,et al.  Experimental study of free-shear layer transition above a cavity at Mach 3.5 , 1989 .

[5]  Gary S. Settles,et al.  A study of reattachment of a free shear layer in compressible turbulent flow , 1980 .

[6]  R. H. Korkegi,et al.  Survey of viscous interactions associated with high Mach number flight , 1971 .

[7]  A. Smits,et al.  Compressible boundary-layer density cross sections by UV Rayleigh scattering. , 1989, Optics letters.

[8]  M. Samimy,et al.  Structure of a reattaching supersonic shear layer , 1990 .

[9]  P. Dimotakis,et al.  The mixing layer at high Reynolds number: large-structure dynamics and entrainment , 1976, Journal of Fluid Mechanics.

[10]  Alexander J. Smits,et al.  Organized structures in a compressible, turbulent boundary layer , 1987, Journal of Fluid Mechanics.

[11]  D. Dolling,et al.  Unsteadiness of the Separation Shock Wave Structure in a Supersonic Compression Ramp Flowfield , 1983 .

[12]  Alexander J. Smits,et al.  Turbulence structure in a shock wave/turbulent boundary-layer interaction , 1989 .

[13]  W. J. Chyu,et al.  Power- and cross-spectra and space-time correlations of surface fluctuating pressures at Mach numbers between 1.6 and 2.5. , 1968 .

[14]  Gary S. Settles,et al.  A Reattaching Free Shear Layer in Compressible Turbulent Flow: A Comparison of Numerical and Experimental Results , 1981 .

[15]  C. T. Or,et al.  Unsteadiness of the shock wave structure in attached and separated compression ramp flows , 1985 .

[16]  Joseph Edward Shigley,et al.  Mechanical engineering design , 1972 .

[17]  Jean-Paul Dussauge,et al.  Unsteady nature of shock-wave/turbulent boundary-layer interaction , 1988 .