Modeling of an anode supported Solid Oxide Fuel Cell focusing on Thermal Stresses

[1]  Christoph Hochenauer,et al.  Three-dimensional numerical and experimental investigation of an industrial-sized SOFC fueled by diesel reformat – Part II: Detailed reforming chemistry and carbon deposition analysis , 2015 .

[2]  Tingshuai Li,et al.  Mechanism of Phosphorus and Chlorine Passivating a Nickel Catalyst: A Density Functional Theory Study , 2015 .

[3]  Murat Peksen,et al.  Numerical thermomechanical modelling of solid oxide fuel cells , 2015 .

[4]  W. Wang,et al.  Effects of PH3 and CH3Cl Contaminants on the Performance of Solid Oxide Fuel Cells , 2014 .

[5]  B. Sundén,et al.  Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics , 2014 .

[6]  Siwei Wang,et al.  Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network , 2014 .

[7]  M. Ni,et al.  Investigation of the electrochemical active thickness of solid oxide fuel cell anode , 2014 .

[8]  Tingshuai Li,et al.  Investigation into the effects of sulfur on syngas reforming inside a solid oxide fuel cell , 2014 .

[9]  B. Sundén,et al.  SOFC Cell Design Optimization Using the Finite Element Method Based CFD Approach , 2014 .

[10]  F. Chen,et al.  Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film. , 2014, ACS applied materials & interfaces.

[11]  Xiongwen Zhang,et al.  Numerical study on thermal stresses of a planar solid oxide fuel cell , 2014 .

[12]  B. Sundén,et al.  SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants , 2013 .

[13]  S. Tu,et al.  Three-dimensional simulation to study the influence of foil thickness on residual stress in the bonded compliant seal design of planar solid oxide fuel cell , 2012 .

[14]  Yuanyuan Xie,et al.  Multi-scale electrochemical reaction anode model for solid oxide fuel cells , 2012 .

[15]  Zongping Shao,et al.  Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells , 2012 .

[16]  Bengt Sundén,et al.  SOFC modeling considering electrochemical reactions at the active three phase boundaries , 2012 .

[17]  D. Brett,et al.  Stress analysis of solid oxide fuel cell anode microstructure reconstructed from focused ion beam to , 2011 .

[18]  T. Chen,et al.  Chlorine contaminants poisoning of solid oxide fuel cells , 2011 .

[19]  M. Soroush,et al.  Mathematical modeling of solid oxide fuel cells: A review , 2011 .

[20]  P. Holtappels,et al.  Solid oxide fuel cells (SOFC) , 2010 .

[21]  Bengt Sundén,et al.  Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC , 2010 .

[22]  Jin Hyun Nam,et al.  A micro/macroscale model for intermediate temperature solid oxide fuel cells with prescribed fully-d , 2010 .

[23]  Jeong-Ho Kim,et al.  Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cells , 2010 .

[24]  Abhijit Chandra,et al.  Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions , 2010 .

[25]  Lieh-Kwang Chiang,et al.  Thermal stress and thermo-electrochemical analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity , 2010 .

[26]  Pierre Bleuet,et al.  Determination of global and local residual stresses in SOFC by X-ray diffraction , 2010 .

[27]  Lieh-Kwang Chiang,et al.  Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design , 2009 .

[28]  Heesung Yoon,et al.  High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells , 2009 .

[29]  Vladimir S. Bagotsky,et al.  Fuel Cells: Problems and Solutions , 2009 .

[30]  Lieh-Kwang Chiang,et al.  Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell , 2008 .

[31]  D. Brett,et al.  Intermediate temperature solid oxide fuel cells. , 2008, Chemical Society reviews.

[32]  R. Kee,et al.  Modeling Distributed Charge-Transfer Processes in SOFC Membrane Electrode Assemblies , 2008 .

[33]  Rolf W. Steinbrech,et al.  Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells , 2007 .

[34]  Lieh-Kwang Chiang,et al.  Thermal stress analysis of a planar SOFC stack , 2007 .

[35]  M. Grae Worster,et al.  Interfacial conditions between a pure fluid and a porous medium: implications for binary alloy solidification , 2006, Journal of Fluid Mechanics.

[36]  Miriam Kemm,et al.  Steady state and transient thermal stress analysis in planar solid oxide fuel cells , 2005 .

[37]  S. Cocchi,et al.  A global thermo-electrochemical model for SOFC systems design and engineering , 2003 .

[38]  R. Mark Ormerod.  Solid oxide fuel cells. , 2003, Chemical Society reviews.

[39]  A. Selçuk,et al.  The influence of electrodes on the strength of planar zirconia solid oxide fuel cells , 2001 .

[40]  Tohru Yamamoto,et al.  Thermal Expansion of Nickel‐Zirconia Anodes in Solid Oxide Fuel Cells during Fabrication and Operation , 1998 .

[41]  H. Bargmann.  On inertia effects in thermoelasticity and thermal shock parameters , 1992 .

[42]  J. Malzbender,et al.  Threshold fracture stress of thin ceramic components , 2008 .

[43]  P. Holtappels,et al.  Fabrication and performance of advanced multi-layer SOFC cathodes , 2002 .