Cold spraying - A materials perspective
暂无分享,去创建一个
Thomas Klassen | Hamid Assadi | Frank Gärtner | H. Assadi | F. Gärtner | T. Klassen | Heinrich Kreye | H. Kreye
[1] S. Kuroda,et al. Bonding mechanisms of thermally softened metallic powder particles and substrates impacted at high velocity , 2010 .
[2] Renzhong Huang,et al. Development of ultra-strong adhesive strength coatings using cold spray , 2014 .
[3] Ji-shan Zhang,et al. Tribological behavior of cold-sprayed nanocrystalline and conventional copper coatings , 2012 .
[4] Changhee Lee,et al. Strain-enhanced nanocrystallization of a CuNiTiZr bulk metallic glass coating by a kinetic spraying process , 2009 .
[5] Sanjay Sampath,et al. Integrated characterization of cold sprayed aluminum coatings , 2007 .
[6] N. Millot,et al. Deposition and characterization of cold sprayed nanocrystalline NiTi , 2011 .
[7] Thomas Klassen,et al. From Particle Acceleration to Impact and Bonding in Cold Spraying , 2009 .
[8] J. Schoenung,et al. Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic spraying , 2006 .
[9] Changhee Lee,et al. Nanoscale deformation twinning at ultrahigh strain rates during kinetic spraying of nickel , 2012 .
[10] F. Bernier,et al. Cold Spray Forming of Inconel 718 , 2012, Journal of thermal spray technology (Print).
[11] Eric Irissou,et al. Effect of Heat Treatment on the Microstructure and Mechanical Properties of Stainless Steel 316L Coatings Produced by Cold Spray for Biomedical Applications , 2014, Journal of Thermal Spray Technology.
[12] S. E. Schoenfeld,et al. A failure criterion based on material instability , 2003 .
[13] H. Liao,et al. Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: Effect of reinforcement content , 2014 .
[14] A. Jyothirmayi,et al. The Corrosion Behavior of Cold Sprayed Zinc Coatings on Mild Steel Substrate , 2013, Journal of Thermal Spray Technology.
[15] Victor K. Champagne,et al. The Cold Spray Materials Deposition Process : Fundamentals and Applications , 2007 .
[16] Wenya Li,et al. Effect of substrate hardness on the deformation behavior of subsequently incident particles in cold spraying , 2011 .
[17] T. Hussain,et al. Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties , 2012 .
[18] Jun Song,et al. The Effects of Contact Conditions on the Onset of Shear Instability in Cold-Spray , 2015, Journal of Thermal Spray Technology.
[19] A. Papyrin,et al. A method of "cold" gas-dynamic deposition , 1990 .
[20] T. Xiong,et al. Numerical Simulation of Minimal Average Bonding Strength to Suppress Rebounding in Cold Spraying Cu/Cu: A Preliminary Study , 2014, Journal of Thermal Spray Technology.
[21] William L. Johnson,et al. Rheology and Ultrasonic Properties of Metallic Glass-Forming Liquids: A Potential Energy Landscape Perspective , 2007 .
[22] G. Lucchetta,et al. Investigation and characterization of Stellite-based wear-resistant coatings applied to steel moulds by cold-spray , 2015 .
[23] C. Park,et al. Cold spray deposition of mechanically alloyed ternary Cu–CNT–SiC composite powders , 2015 .
[24] Changhee Lee,et al. Formation of coating and tribological behavior of kinetic sprayed Fe-based bulk metallic glass , 2011 .
[25] Evan Ma,et al. Shear bands in metallic glasses , 2013 .
[26] M. Radulescu,et al. Ni-Al Nanoscale Energetic Materials: Phenomena Involved During the Manufacturing of Bulk Samples by Cold Spray , 2014, Journal of Thermal Spray Technology.
[27] Saeed Rahmati,et al. The Use of Particle/Substrate Material Models in Simulation of Cold-Gas Dynamic-Spray Process , 2014, Journal of Thermal Spray Technology.
[28] H. Singh,et al. Cold spray coating process for corrosion protection: a review , 2014 .
[29] M. Gardon,et al. Cold gas spray titanium coatings onto a biocompatible polymer , 2013 .
[30] J. M. Guilemany,et al. Residual stress development in cold sprayed Al, Cu and Ti coatings , 2013 .
[31] H. Liao,et al. On high velocity impact of micro-sized metallic particles in cold spraying , 2006 .
[32] K. Ko,et al. Pretreatment effect of Cu feedstock on cold-sprayed coatings , 2014 .
[33] J. Legoux,et al. Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: Electron backscatter diffraction characterization , 2009 .
[34] Eric Irissou,et al. Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings , 2007, International Thermal Spray Conference.
[35] F. Gärtner,et al. Impact Conditions for Cold Spraying of Hard Metallic Glasses , 2011, Journal of Thermal Spray Technology.
[36] Changhee Lee,et al. Dynamic amorphization and recrystallization of metals in kinetic spray process , 2008 .
[37] H. Liao,et al. The effect of heat treatment on microstructure and tensile properties of cold spray Zr base metal glass/Cu composite , 2015 .
[38] Do Yeon Kim,et al. Graphene–Titania Hybrid Photoanodes by Supersonic Kinetic Spraying for Solar Water Splitting , 2014 .
[39] P. Shipway,et al. Production of titanium deposits by cold-gas dynamic spray: Numerical modeling and experimental characterization , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[40] C. Zhang,et al. Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying , 2007 .
[41] Changhee Lee,et al. Oxidation dependency of critical velocity for aluminum feedstock deposition in kinetic spraying process , 2008 .
[42] Hamid Assadi,et al. Bonding mechanism in cold gas spraying , 2003 .
[43] O. Stier,et al. Fundamental Cost Analysis of Cold Spray , 2013, Journal of Thermal Spray Technology.
[44] H. Liao,et al. Effect of heat treatment on the microstructure and microhardness of cold-sprayed tin bronze coating , 2007 .
[45] H. Singh,et al. High-temperature oxidation studies of cold-sprayed Ni–20Cr and Ni–50Cr coatings on SAE 213-T22 boiler steel , 2009 .
[46] Wenya Li,et al. Numerical Investigation on Effects of Interactions Between Particles on Coating Formation in Cold Spraying , 2009 .
[47] Mingxing Zhang,et al. Residual stress and thermo-mechanical properties of cold spray metal coatings , 2011 .
[48] J. Guilemany,et al. Optimization of 316L stainless steel coatings on light alloys using Cold Gas Spray , 2013 .
[49] A. Alkimov. Gas-Dynamic spray Method for Applying a Coating , 1994 .
[50] Ralf Moos,et al. An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications , 2015 .
[51] Changhee Lee,et al. Impacting behavior of bulk metallic glass powder at an abnormally high strain rate during kinetic spraying , 2007 .
[52] Hamid Assadi,et al. Impact Behavior of Intrinsically Brittle Nanoparticles: A Molecular Dynamics Perspective , 2014, Journal of Thermal Spray Technology.
[53] Keith Murray,et al. High Pressure Cold Sprayed (HPCS) and Low Pressure Cold Sprayed (LPCS) Coatings Prepared from OFHC Cu Feedstock: Overview from Powder Characteristics to Coating Properties , 2012, Journal of Thermal Spray Technology.
[54] G. R. Johnson,et al. A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .
[55] M. Boustie,et al. Laser Shock Flier Impact Simulation of Particle-Substrate Interactions in Cold Spray , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[56] Changhee Lee,et al. Phase evolutions of bulk amorphous NiTiZrSiSn feedstock during thermal and kinetic spraying processes , 2005 .
[57] M. F. Smith,et al. Gas dynamic principles of cold spray , 1998 .
[58] R. Mccune,et al. An exploration of the cold gas-dynamic spray method for several materials systems , 1995 .
[59] S. Bagherifard,et al. Experimental and numerical study of residual stress evolution in cold spray coating , 2014 .
[60] M. Yu,et al. Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings , 2012, Journal of Thermal Spray Technology.
[61] F. Gärtner,et al. Microstructural bonding features of cold sprayed face centered cubic metals , 2004 .
[62] J. Jang,et al. Corrosion behavior in a 3.5 wt% NaCl solution of amorphous coatings prepared through plasma-spray and cold-spray coating processes , 2014, Metals and Materials International.
[63] Mitsuhiro Watanabe,et al. High-Speed Deformation and Collision Behavior of Pure Aluminum Plates in Magnetic Pulse Welding , 2009 .
[64] Xiaoping Zhou,et al. Preparation of metallic coatings on polymer matrix composites by cold spray , 2011 .
[65] Changhee Lee,et al. Influence of the interface temperature and strain gradients on the impact energy model of a soft particle on a hard substrate during kinetic spraying , 2011 .
[66] T. Clyne,et al. An analytical model for predicting residual stresses in progressively deposited coatings Part 2: Cylindrical geometry , 1997 .
[67] J. Affi,et al. Bonding behavior studies of cold sprayed copper coating on the PVC polymer substrate , 2012 .
[68] Jie Zhao,et al. Influence of annealing treatment on the microstructure and mechanical performance of cold sprayed 304 stainless steel coating , 2011 .
[69] K. Mitsuishi,et al. Impact bonding and rebounding between kinetically sprayed titanium particle and steel substrate revealed by high-resolution electron microscopy , 2009 .
[70] D. Fraser,et al. Recrystallization of Cold Spray-Fabricated CP Titanium Structures , 2009 .
[71] Changhee Lee,et al. General aspects of interface bonding in kinetic sprayed coatings , 2008 .
[72] M. Yu,et al. Prediction of Critical Velocity During Cold Spraying Based on a Coupled Thermomechanical Eulerian Model , 2013, Journal of Thermal Spray Technology.
[73] C. Park,et al. Cold spray deposition characteristics of mechanically alloyed Cu-CNT composite powders , 2014 .
[74] P. Perzyna,et al. The Physics and Mathematics of Adiabatic Shear Bands , 2002 .
[75] Wenya Li,et al. Effect of substrate temperature on interfacial bonding for cold spray of Ni onto Cu , 2015, Journal of Materials Science.
[76] Kee‐Ahn Lee,et al. Manufacture and properties of cold spray deposited large thickness Cu coating material for sputtering target , 2011 .
[77] J. Guilemany,et al. Comparison of the mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by high velocity oxy-fuel and cold gas spraying , 2015 .
[78] M. Smith,et al. 3 – Comparing cold spray with thermal spray coating technologies , 2007 .
[79] D. J. Helfritch,et al. Mainstreaming cold spray – push for applications , 2014 .
[80] Changhee Lee,et al. Microstructure and texture of Al coating during kinetic spraying and heat treatment , 2012, Journal of Materials Science.
[81] A. Hall,et al. The effect of a simple annealing heat treatment on the mechanical properties of cold-sprayed aluminum , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[82] Stefan Riekehr,et al. Mechanical properties of cold-sprayed and thermally sprayed copper coatings , 2006 .
[83] Fulin Shang,et al. High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review , 2014 .
[84] J. Akedo. Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices , 2008 .
[85] Daniel W. Gorkiewicz,et al. Kinetic spray coatings , 1999 .
[86] V. F. Kosarev,et al. On some aspects of gas dynamics of the cold spray process , 2003 .
[87] M. Gardon,et al. Milestones in Functional Titanium Dioxide Thermal Spray Coatings: A Review , 2014, Journal of Thermal Spray Technology.
[88] G. Sundararajan,et al. The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings , 2011 .
[89] Changhee Lee,et al. Effect of particle size on the microstructure and properties of kinetic sprayed nickel coatings , 2010 .
[90] H. Liao,et al. Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings , 2015, Journal of Thermal Spray Technology.
[91] M. Jahedi,et al. Focused ion beam micro-dissection of cold-sprayed particles , 2008 .
[92] S. Sampath,et al. Impact of high velocity cold spray particles , 1999 .
[93] Chang-jiu Li,et al. Formation of metastable phases in cold-sprayed soft metallic deposit , 2005 .
[94] N.,et al. A PHENOMENOLOGICAL THEORY FOR STRAIN GRADIENT EFFECTS IN PLASTICITY , 2002 .
[95] H. Assadi,et al. Analysis of Thermal History and Residual Stress in Cold-Sprayed Coatings , 2013, Journal of Thermal Spray Technology.
[96] T. Klassen,et al. Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments , 2014, Journal of thermal spray technology (Print).
[97] R. Lupoi,et al. Deposition of metallic coatings on polymer surfaces using cold spray , 2010 .
[98] H. Fang,et al. The rebound phenomenon in kinetic spraying deposition , 2006 .
[99] Abdullah C. W. Noorakma,et al. Hydroxyapatite-Coated Magnesium-Based Biodegradable Alloy: Cold Spray Deposition and Simulated Body Fluid Studies , 2013, Journal of Materials Engineering and Performance.
[100] F. Gärtner,et al. Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying , 2005 .
[101] R. Dykhuizen,et al. Particle velocity and deposition efficiency in the cold spray process , 1999 .
[102] M. Boustie,et al. Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats , 2008, International Thermal Spray Conference.
[103] M. Zhang,et al. Review on Recent Research and Development of Cold Spray Technologies , 2012 .
[104] T. Schmidt,et al. High strain rate deformation microstructures of stainless steel 316L by cold spraying and explosive powder compaction , 2008 .
[105] H. Nishiyama,et al. Computational simulation of cold spray process assisted by electrostatic force , 2008 .
[106] Renzhong Huang,et al. The effects of heat treatment on the mechanical properties of cold-sprayed coatings , 2015 .
[107] Philippe Bocher,et al. Cold spray as a novel method for development of nickel electrode coatings for hydrogen production , 2016 .
[108] H. Assadi,et al. Cold Spraying of Amorphous Cu50Zr50 Alloys , 2014, Journal of Thermal Spray Technology.
[109] H. Araki,et al. Reaction layer at the interface between aluminium particles and a glass substrate formed by cold spray , 2013 .
[110] H. Richter,et al. On Parameter Selection in Cold Spraying , 2011 .
[111] M. Guagliano,et al. Cold spray coating: review of material systems and future perspectives , 2014 .
[112] Wenya Li,et al. Deposition behavior of thermally softened copper particles in cold spraying , 2013 .
[113] K. Khor,et al. Effects of Al-Cr-Fe Quasicrystal Content on Tribological Properties of Cold-Sprayed Titanium Composite Coatings , 2015 .
[114] John J. Jonas,et al. Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations , 1984 .
[115] J. Hooper,et al. Synthesis of nanodiamond-reinforced aluminum metal matrix composites using cold-spray deposition , 2015 .
[116] Longjian Li,et al. The acceleration of charged nano-particles in gas stream of supersonic de-Laval-type nozzle coupled with static electric field , 2006 .
[117] P. Bertrand,et al. Cold spraying: From process fundamentals towards advanced applications , 2015 .
[118] Changhee Lee,et al. Nanostructure formation and its effects on the mechanical properties of kinetic sprayed titanium coating , 2010 .
[119] R. Sivakumar,et al. Optimization of multiple responses using overlaid contour plot and steepest methods analysis on hydroxyapatite coated magnesium via cold spray deposition , 2015 .
[120] H. Liao,et al. Ball milled Ni–Ti powder deposited by cold spraying , 2009 .
[121] E. O. Olakanmi,et al. Laser-Assisted Cold-Sprayed Corrosion- and Wear-Resistant Coatings: A Review , 2014, Journal of Thermal Spray Technology.
[122] N. Birbilis,et al. High resolution microstructure characterization of the interface between cold sprayed Al coating and Mg alloy substrate , 2014 .
[123] Wenya Li,et al. Deformation behavior of the oxide film on the surface of cold sprayed powder particle , 2012 .
[124] M. Jahedi,et al. Embedment of copper particles into polymers by cold spray , 2013 .
[125] H. Liao,et al. Deposition features of cold sprayed copper particles on preheated substrate , 2015 .
[126] V. Luzin,et al. Analysis of the residual stress and bonding mechanism in the cold spray technique using experimental and numerical methods , 2014 .
[127] Frank Gärtner,et al. Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings , 2006 .
[128] Hiroaki Isago,et al. Cold Spraying of TiO2 Photocatalyst Coating With Nitrogen Process Gas , 2010 .
[129] K. Ogawa,et al. Mechanistic Study and Characterization of Cold-Sprayed Ultra-High Molecular Weight Polyethylene-Nano-ceramic Composite Coating , 2015, Journal of Thermal Spray Technology.
[130] A. Papyrin,et al. Gas-dynamic spraying. An experimental study of the spraying process , 1998 .
[131] M. Demetriou,et al. Shear flow characteristics and crystallization kinetics during steady non-isothermal flow of Vitreloy-1 , 2004 .
[132] Changhee Lee,et al. Kinetic Spraying Deposition Behavior of Bulk Amorphous NiTiZrSiSn Feedstock , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[133] P. Coddet,et al. Mechanical properties of thick 304L stainless steel deposits processed by He cold spray , 2015 .
[134] M. Kumar,et al. Erosion–corrosion behavior of cold-spray nanostructured Ni–20Cr coatings in actual boiler environment , 2015 .
[135] L. Ajdelsztajn,et al. Substrate roughness and thickness effects on cold spray nanocrystalline Al−Mg coatings , 2006 .
[136] Changhee Lee,et al. Phase separation in kinetic sprayed bulk metallic glasses , 2009 .
[137] Y. Zhou,et al. Metallurgical analysis of magnetic pulse welds of AZ31 magnesium alloy , 2011 .
[138] T. Eden,et al. Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens , 2014 .
[139] Wenya Li,et al. Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coating , 2010 .
[140] H. Teichler,et al. Flow state in molecular-dynamics-simulated deformed amorphous Ni 0.5 Zr 0.5 , 2002 .
[141] V. K. Champagne,et al. Repair of magnesium components by cold spray techniques , 2007 .
[142] V. Champagne,et al. Nano crystalline high energy milled 5083 Al powder deposited using cold spray , 2014 .
[143] R. Mccune,et al. Characterization of copper layers produced by cold gas-dynamic spraying , 2000 .
[144] Beom-Jin Lee,et al. Influence of oxide chemistry of feedstock on cold sprayed Cu coatings , 2012 .
[145] S. W. Dean. Energetic intermetallic materials formed by cold spray , 2013 .
[146] Kee‐Ahn Lee,et al. Effect of Powder Preheating Temperature on the Properties of Titanium Coating Layers Manufactured by Kinetic Spraying , 2014 .
[147] Hyun-Ki Kang,et al. Tungsten/copper composite deposits produced by a cold spray , 2003 .
[148] Noppakun Sanpo,et al. Antibacterial Property of Cold-Sprayed HA-Ag/PEEK Coating , 2009 .
[149] R. Chromik,et al. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al2O3 composites , 2015 .
[150] X. Bai,et al. Deformation Behaviors of Cold-Sprayed WC-Co Particles , 2015, Journal of Thermal Spray Technology.
[151] S. Yue,et al. Microstructure and nanohardness of cold-sprayed coatings: Electron backscattered diffraction and nanoindentation studies , 2010 .
[152] F. Gärtner,et al. Recent Developments and Potential Applications of Cold Spraying , 2006 .
[153] T. Eden,et al. Effect of Surface Preparation on the Microstructure, Adhesion, and Tensile Properties of Cold-Sprayed Aluminum Coatings on AA2024 Substrates , 2015, Journal of Thermal Spray Technology.
[154] Xuan Zhou,et al. Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks’ solution , 2012 .
[155] H. Assadi,et al. Strain‐Induced Phase Transformation of MCrAlY , 2015 .
[156] Wenya Li,et al. Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation , 2015, Journal of Thermal Spray Technology.
[157] Tobias Schmidt,et al. The cold spray process and its potential for industrial applications , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[158] M. Yu,et al. Effect of particle and substrate preheating on particle deformation behavior in cold spraying , 2013 .
[159] M. Yu,et al. Modelling of impact behaviour of cold spray particles: review , 2014 .
[160] Anatolii Papyrin,et al. Cold Spray Technology , 2006 .
[161] J. Schroers,et al. Strain rate induced crystallization in bulk metallic glass-forming liquid. , 2006, Physical review letters.
[162] J. M. McGlaun,et al. CTH: A software family for multi-dimensional shock physics analysis , 1995 .
[163] J. Legoux,et al. Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings , 2013, Journal of thermal spray technology (Print).
[164] M. Ashby,et al. Strain gradient plasticity: Theory and experiment , 1994 .
[165] R. Gauvin,et al. Microstructure and Mechanical Properties of Ti Cold-Spray Splats Determined by Electron Channeling Contrast Imaging and Nanoindentation Mapping , 2015, Microscopy and Microanalysis.
[166] E. Yamaguchi,et al. Microstructure of Interfacial Region Between Cold-Sprayed Copper Coating and AlN Substrate Coated with Sputtered Titanium and Copper , 2011 .
[167] J. Guilemany,et al. Study of stellite-6 deposition by cold gas spraying , 2013 .
[168] Changhee Lee,et al. Dependence of initial powder temperature on impact behaviour of bulk metallic glass in a kinetic spray process , 2009 .
[169] M. Fukumoto,et al. Influence of Substrate Temperature on Adhesion Strength of Cold-Sprayed Coatings , 2014, Journal of Thermal Spray Technology.
[170] Shuo Yin,et al. Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method , 2010 .
[171] Hyung-Ho Jo,et al. Tribological behavior of the kinetic sprayed Ni59Ti16Zr20Si2Sn3 bulk metallic glass , 2007 .
[172] Eric Irissou,et al. Review on Cold Spray Process and Technology: Part I—Intellectual Property , 2008 .
[173] John J. Jonas,et al. Dynamic recrystallization - Mechanical and microstructural considerations , 1984 .
[174] M. Jahedi,et al. An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates , 2010 .
[175] T. Klassen,et al. Effect of Substrate Temperature on Cold-Gas-Sprayed Coatings on Ceramic Substrates , 2012, Journal of Thermal Spray Technology.
[176] Tomonaga Okabe,et al. Experimental and SPH study of cold spray impact between similar and dissimilar metals , 2014 .
[177] P. Shipway,et al. Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components , 2009 .
[178] N. Sacks,et al. Cold gas dynamic spraying of WC–Ni cemented carbide coatings , 2015 .
[179] William O’Neill,et al. The laser-assisted cold spray process and deposit characterisation , 2009 .
[180] Sangseok Yu,et al. Cold spray induced amorphization at the interface between Fe coatings and Al substrate , 2015 .
[181] S. Kumar,et al. Bonding features and associated mechanisms in kinetic sprayed titanium coatings , 2009 .
[182] K. Manygoats,et al. Interface Characterization and Bonding Mechanisms of Cold Gas-Sprayed Al Coatings on Ceramic Substrates , 2014, Journal of Thermal Spray Technology.
[183] C. Moreau,et al. Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment , 2010 .
[184] A. Papyrin,et al. Gas-dynamic spraying study of a plane supersonic two-phase jet , 1997 .
[185] H. Assadi,et al. Determination of plastic constitutive properties of microparticles through single particle compression , 2015 .
[186] Mingxing Zhang,et al. Residual stresses in cold spray Al coatings: The effect of alloying and of process parameters , 2012 .
[187] Mica Grujicic,et al. Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process , 2003 .
[188] H. Fang,et al. Critical Velocities for High Speed Particle Deposition in Kinetic Spraying , 2006 .
[189] A. Segall,et al. A cold-gas spray coating process for enhancing titanium , 1998 .
[190] M. Brochu,et al. Pressureless sintering of cold sprayed Inconel 718 deposit , 2012 .
[191] J. Legoux,et al. Cold-spray processing of titanium and titanium alloys , 2015 .
[192] A. M. Vilardell,et al. Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art , 2015, Journal of Materials Science.
[193] Jacob L. Jones,et al. In situ observation of microstrain relief in cold-sprayed bulk copper during thermal annealing , 2012 .
[194] D. Apelian,et al. Microstructural Analysis of Cold-Sprayed Ti-6Al-4V at the Micro- and Nano-Scale , 2015, Journal of Thermal Spray Technology.
[195] R. Maev,et al. Air gas dynamic spraying of powder mixtures: Theory and application , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.
[196] H. Assadi,et al. Microstructural and macroscopic properties of cold sprayed copper coatings , 2003 .
[197] J. Cizek,et al. On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits , 2015 .
[198] Petri Vuoristo,et al. Influence of process conditions in laser-assisted low-pressure cold spraying , 2008 .
[199] J. Guilemany,et al. Structural and properties characterization of stellite coatings obtained by cold gas spraying , 2013 .
[200] Changhee Lee,et al. Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process , 2006 .
[201] Christian Coddet,et al. Microstructure, microhardness and dry friction behavior of cold-sprayed tin bronze coatings , 2007 .
[202] R. Gauvin,et al. Microstructure Refinement of Cold-Sprayed Copper Investigated By Electron Channeling Contrast Imaging , 2014, Microscopy and Microanalysis.
[203] Wenya Li,et al. Cold spraying of light alloys , 2010 .
[204] M. Radulescu,et al. Reactive structural materials consolidated by cold spray: Al–CuO thermite , 2013 .
[205] J. Hooper,et al. Synthesis of nanodiamond-reinforced aluminum metal composite powders and coatings using high-energy ball milling and cold spray , 2013 .
[206] Thomas Klassen,et al. Single Impact Bonding of Cold Sprayed Ti-6Al-4V Powders on Different Substrates , 2014, Journal of Thermal Spray Technology.
[207] M. Grujicic,et al. Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process , 2004 .
[208] H. Liao,et al. A study on the microstructure and tribological behavior of cold-sprayed metal matrix composites reinforced by particulate quasicrystal , 2015 .
[209] H. Richter,et al. An analysis of the cold spray process and its coatings , 2002 .
[210] Changhee Lee,et al. Microstructure of Kinetic Spray Coatings: A Review , 2015, Journal of Thermal Spray Technology.
[211] H. Singh,et al. Investigations on the Behavior of HVOF and Cold Sprayed Ni-20Cr Coating on T22 Boiler Steel in Actual Boiler Environment , 2011, Journal of Thermal Spray Technology.
[212] C. Zhang,et al. Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying , 2007 .
[213] X. Xiong,et al. Dependence of Bonding Mechanisms of Cold Sprayed Coatings on Strain-Rate-Induced Non-Equilibrium Phase Transformation , 2011 .
[214] J. Karthikeyan,et al. Evaluation of characteristics and behavior of cold sprayed Ni–20Cr coating at elevated temperature in waste incinerator plant , 2015 .
[215] L. Roué,et al. Cold sprayed Cu–Ni–Fe anode for Al production , 2015 .
[216] Tobias Schmidt,et al. Development of a generalized parameter window for cold spray deposition , 2006 .
[217] Changhee Lee,et al. Interfacial bonding and microstructural evolution of Al in kinetic spraying , 2012, Journal of Materials Science.
[218] W. Zhuang,et al. Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate , 2015 .
[219] Guanjun Yang,et al. Influence of Substrate Hardness on Deposition Behavior of Single Porous WC-12Co Particles in Cold Spraying , 2008, International Thermal Spray Conference.
[220] H. Ogawa. Atomistic Simulation of the Aerosol Deposition Method with Zirconia Nanoparticles , 2006 .
[221] J. Guilemany,et al. On the formation of metallic glass coatings by means of Cold Gas Spray technology , 2015 .
[222] J. Guilemany,et al. Influence of Cold Gas Spray process conditions on the microstructure of Fe-based amorphous coatings , 2015 .
[223] Do Yeon Kim,et al. Cold Spray Deposition of Copper Electrodes on Silicon and Glass Substrates , 2013, Journal of Thermal Spray Technology.
[224] Cold gas spraying – A promising technique for photoelectrodes: The example TiO2 , 2016 .
[225] C. Berndt,et al. Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings , 2002 .
[226] A. Tokarev. Structure of aluminum powder coatings prepared by cold gasdynamic spraying , 1996 .
[227] Jae-il Jang,et al. Correlation of particle impact conditions with bonding, nanocrystal formation and mechanical properties in kinetic sprayed nickel , 2012 .