Survivability of series-parallel systems with multilevel protection

In this paper, we consider vulnerable systems which can have different states corresponding to different combinations of available elements composing the system. Each state can be characterized by a performance rate, which is the quantitative measure of a system’s ability to perform its task. Both the impact of external factors (attack) and internal causes (failures) affect system survivability, which is determined as the probability of meeting a given demand. In order to increase the system’s survivability a multilevel protection can be applied to its subsystems. In such systems, the protected subsystems are destroyed by external impacts only if all of the levels of their protection are destroyed. The paper describes an algorithm for evaluating the survivability of series–parallel systems with arbitrary configuration of multilevel protection. The algorithm is based on a composition of Boolean and the Universal Generating Function techniques. The adaptation of the algorithm for numerical implementation is suggested. Illustrative examples are presented. q 2004 Published by Elsevier Ltd.

[1]  George Apostolakis.  The effect of a certain class of potential common mode failures on the reliability of redundant systems , 1976 .

[2]  J. K. Vaurio,et al.  An implicit method for incorporating common-cause failures in system analysis , 1998 .

[3]  Gregory Levitin,et al.  Optimizing survivability of vulnerable series-parallel multi-state systems , 2003, Reliab. Eng. Syst. Saf..

[4]  D. Elmakis,et al.  Redundancy optimization for series-parallel multi-state systems , 1998 .

[5]  Kyung C. Chae,et al.  System Reliability in the Presence of Common-Cause Failures , 1986, IEEE Transactions on Reliability.

[6]  Balbir S. Dhillon,et al.  COMMON-CAUSE FAILURES IN ENGINEERING SYSTEMS: A REVIEW , 1994 .

[7]  Gregory Levitin,et al.  Multi-state System Reliability Analysis and Optimization (Universal Generating Function and Genetic Algorithm Approach) , 2003 .

[8]  Enrico Zio,et al.  The impact of the operating environment on the design of redundant configurations , 1999 .

[9]  P. M. Anderson,et al.  An improved model for protective-system reliability , 1992 .

[10]  Gregory Levitin.  Maximizing survivability of acyclic transmission networks with multi-state retransmitters and vulnerable nodes , 2002, Reliab. Eng. Syst. Saf..

[11]  Gregory Levitin,et al.  Multi-State System Reliability - Assessment, Optimization and Applications , 2003, Series on Quality, Reliability and Engineering Statistics.

[12]  Winfrid G. Schneeweiss,et al.  Boolean functions - with engineering applications and computer programs , 1989 .

[13]  Do Sun Bai,et al.  Redundancy optimization of k-out-of-n systems with common-cause failures , 1991 .

[14]  Gregory Levitin,et al.  Survivability maximization for vulnerable multi-state systems with bridge topology , 2000, Reliab. Eng. Syst. Saf..

[15]  Jussi K. Vaurio.  The theory and quantification of common cause shock events for redundant standby systems , 1994 .

[16]  J. B. Fussell,et al.  Nuclear Systems Reliability Engineering and Risk Assessment , 1978 .

[17]  Gregory Levitin.  Incorporating common-cause failures into nonrepairable multistate series-parallel system analysis , 2001, IEEE Trans. Reliab..

[18]  Gregory Levitin,et al.  Optimal multilevel protection in series-parallel systems , 2003, Reliab. Eng. Syst. Saf..

[19]  Lavon B. Page,et al.  A model for system reliability with common-cause failures , 1989 .

[20]  Karl N. Fleming,et al.  A risk informed defense-in-depth framework for existing and advanced reactors , 2002, Reliab. Eng. Syst. Saf..

[21]  Gregory Levitin,et al.  Optimal separation of elements in vulnerable multi-state systems , 2001, Reliab. Eng. Syst. Saf..