Heat Transfer in a Channel With Inclined Target Surface Cooled by Single Array of Impinging Jets

An experimental investigation has been carried out to study the heat transfer characteristics in a channel with heated target plate inclined at an angle cooled by single array of centered impinging jets. The target plate forms the leading edge of a gas turbine blade. The work includes the effect of various exit outflow orientations and crossflow and feed channel aspect ratios on the heat transfer characteristics for a given orifice-jet plate configuration. Three feed channel aspect ratios (H/d = 5, 7, 9) and have been examined. In general, it has been observed that Nu is high for higher aspect ratios. This increase can be attributed to increase in strength of impinging jets due to increase in feed channel aspect ratio. Additionally, for a given jet-orifice plate with centered holes and for a given Re = 18800, the heat transfer is almost the same through out the target surface for the outflow passing out in both the directions.Copyright © 2007 by ASME

[1]  Raymond E. Chupp,et al.  Evaluation of internal heat-transfer coefficients for impingement-cooled turbine airfoils. , 1969 .

[2]  L. W. Florschuetz,et al.  Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow , 1981 .

[3]  D. E. Metzger,et al.  Heat Transfer Characteristics for Jet Array Impingement With Initial Crossflow , 1983 .

[4]  D. E. Metzger,et al.  Local Heat Transfer in Internally Cooled Turbine Airfoil Leading Edge Regions: Part II—Impingement Cooling With Film Coolant Extraction , 1990 .

[5]  B. W. Webb,et al.  The effect of inclination on local heat transfer under an axisymmetric, free liquid jet , 1991 .

[6]  Barry N. Taylor,et al.  Guidelines for Evaluating and Expressing the Uncertainty of Nist Measurement Results , 2017 .

[7]  S. H. Seyedein,et al.  Laminar flow and heat tranfer from multiple impinging slot jets with an inclined confinement surface , 1994 .

[8]  N. Saniei,et al.  Heat Transfer From an Obliquely Impinging Circular Air Jet to a Flat Plate , 1996, Heat Transfer: Volume 2 — Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation.

[9]  Yue-Tzu Yang,et al.  NUMERICAL STUDY OF MULTIPLE IMPINGING SLOT JETS WITH AN INCLINED CONFINEMENT SURFACE , 1998 .

[10]  Je-Chin Han,et al.  Detailed heat transfer distributions under an array of orthogonal impinging jets , 1998 .

[11]  Jenn-Jiang Hwang,et al.  Augmented Heat Transfer in a Triangular Duct by Using Multiple Swirling Jets , 1999 .

[12]  Jenn-Jiang Hwang,et al.  DETAILED HEAT TRANSFER DISTRIBUTIONS IN A TRIANGULAR DUCT WITH AN ARRAY OF TANGENTIAL JETS , 1999 .

[13]  Je-Chin Han,et al.  Impingement Heat Transfer Measurements Under an Array of Inclined Jets , 2000 .

[14]  Chandrakant D. Patel,et al.  The effect of inclination on the heat transfer between a flat surface and an impinging two-dimensional air jet , 2000 .

[15]  Jenn-Jiang Hwang,et al.  Effect of Outflow Orientation on Heat Transfer and Pressure Drop in a Triangular Duct With an Array of Tangential Jets , 2000 .

[16]  Jenn-Jiang Hwang,et al.  Impingement cooling in triangular ducts using an array of side-entry wall jets , 2001 .

[17]  Darina B. Murray,et al.  CONVECTIVE HEAT TRANSFER OF AN INCLINED RECTANGULAR PLATE , 2002 .

[18]  C. W. Leung,et al.  Heat transfer characteristics of premixed butane/air flame jet impinging on an inclined flat surface , 2002 .

[19]  A. A. Tawfek,et al.  Heat transfer studies of the oblique impingement of round jets upon a curved surface , 2002 .

[20]  Subrata Roy,et al.  Study of heat transfer for a pair of rectangular jets impinging on an inclined surface , 2003 .

[21]  Karim J. Nasr,et al.  A numerically-based parametric study of heat transfer off an inclined surface subject to impinging airflow , 2004 .

[22]  C. Soong,et al.  Measurement of detailed heat transfer on a surface under arrays of impinging elliptic jets by a transient liquid crystal technique , 2004 .

[23]  Wei-Mon Yan,et al.  Experimental study of impinging heat transfer along rib-roughened walls by using transient liquid crystal technique , 2005 .

[24]  S. Mei,et al.  Measurement of detailed heat transfer along rib-roughened surface under arrays of impinging elliptic jets , 2006 .