Experimental tests and numerical modeling of reinforced masonry arches

Abstract The present paper deals with the experimental campaign and the numerical modeling of reinforced masonry arches strengthened with fiber reinforced plastic (FRP) strips. The mechanical properties of masonry material constituents, clay bricks and mixed mortar, are determined through laboratory tests. The experimental response of unreinforced and reinforced arches is investigated. A nonlinear elastic constitutive law for the masonry material is proposed; in particular, the stress–strain relationship is characterized by no-tensile strength and by a quadratic response with exponential post-peak softening in compression. The FRP reinforcement is modeled as a no-compressive material with uniaxial linear elastic constitutive relationship in tension, until a limit strength response characterized by brittle collapse. A beam finite element is developed and a numerical procedure, based on the Newton–Raphson method, is implemented to solve the nonlinear structural problem. The question of the proper setting of the material parameters to consider in the numerical analyses is addressed. Results obtained using the numerical procedure are compared with the experimental ones in order to assess the ability of the proposed procedure and of the model in predicting the failure mechanisms and the global structural response.

[1]  Ismael Basílio,et al.  Strengthening of arched masonry structures with composite materials , 2007 .

[2]  Alain Sellier,et al.  Mechanical behaviour of ancient masonry , 2009 .

[3]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[4]  Paulo B. Lourenço,et al.  Optimal FRP strengthening of masonry arches , 2004 .

[5]  Alessandro Baratta,et al.  Stress analysis of masonry vaults and static efficacy of FRP repairs , 2007 .

[6]  J. Chen,et al.  Load-Bearing Capacity of Masonry Arch Bridges Strengthened with Fibre Reinforced Polymer Composites , 2002 .

[7]  Zila Rinaldi,et al.  Ultimate behavior of masonry arches reinforced with FRP at the intrados: comparison between analytical and numerical models , 2004 .

[8]  Massimiliano Lucchesi,et al.  Masonry-like solids with bounded compressive strength , 1996 .

[9]  J. Z. Zhu,et al.  The finite element method , 1977 .

[10]  C. Modena,et al.  Behavior of Brick Masonry Vaults Strengthened by FRP Laminates , 2001 .

[11]  Sonia Marfia,et al.  Numerical Procedure for Elasto-Plastic No-Tension Model , 2005 .

[12]  Zila Rinaldi,et al.  Systems of arches and columns strengthened with FRP at the extrados , 2004 .

[13]  Modeling of reinforced masonry elements , 2001 .

[14]  Raimondo Luciano,et al.  Limit analysis of masonry arches with externally bonded FRP reinforcements , 2006 .

[15]  S. Sacco.  Computational Modeling of FRP Reinforced Cementitious Beams , 2006 .

[16]  Michael N. Fardis,et al.  Strengthening of historic masonry structures with composite materials , 1997 .

[17]  Sonia Marfia,et al.  Stress Analysis of Reinforced Masonry Arches , 2008 .

[18]  Daniel V. Oliveira,et al.  Experimental and numerical analysis of blocky masonry structures under cyclic loading , 2003 .

[19]  Ashraf F. Ashour,et al.  Modified four-hinge mechanism analysis for masonry arches strengthened with near-surface reinforcement , 2007 .

[20]  L. Gambarotta,et al.  Mechanical response of solid clay brickwork under eccentric loading. Part I: Unreinforced masonry , 2005 .

[21]  M. A. Crisfield,et al.  Non-Linear Finite Element Analysis of Solids and Structures: Advanced Topics , 1997 .

[22]  Paolo Foraboschi,et al.  Strengthening of Masonry Arches with Fiber-Reinforced Polymer Strips , 2004 .

[23]  T. Triantafillou.  Strengthening of Masonry Structures Using Epoxy-Bonded FRP Laminates , 1998 .