Microforming: Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEM

Microforming using a small machine (or so-called desktop machine) is an alternative new approach to those using full-size heavy equipment for manufacturing microparts. Microparts are commonly defined as parts or structures with at least two dimensions in the submillimeter range, which are used extensively in electronics and micromechanical products. However when scaling down a conventional forming process to microscale, the influence of the so-called size effect needs to be considered. The individual microstructure (size, shape, and orientation of grains) and the interfacial conditions show a significant effect on the process characteristics. In this paper, the process of extrusion is investigated to establish it as a viable process for microforming. A forming assembly is fabricated and used in conjunction with a loading substage to extrude micropins with a final diameter of I mm. The effect of grain size is investigated by using workpieces heat treated to produce grain sizes varying from 32 μm up to 211 μm. Two extrusion dies with different roughness are used to study the effect of surface finish. While experiments lead to interesting questions and new discoveries, theoretical or numerical solutions are necessary tools for process optimization. Here, knowing the limits of the current widely used numerical simulation tools [i.e., the Finite Element Method (FEM)], a new method, the Reproducing Kernel Element Method (RKEM), has recently been developed to address the limitations of the FEM (for example, remeshing issue), while maintaining FEM's advantages, e.g., the polynomial reproducing property and function interpolation property. The new RKEM method is used to simulate the microextrusion problem. Its results are compared with that obtained from the FEM and the experiment result. Satisfactory results were obtained. Future directions on the experimental and simulation work are addressed.

[1]  Terry Sheppard,et al.  Temperature changes occurring during extrusion of metals: Comparison of bulk, numerical, and integral profile predictions with experimental data , 1999 .

[2]  Debes Bhattacharyya,et al.  Modelling of metal extrusion using the phoenics package , 1992 .

[3]  Wing Kam Liu,et al.  Multiple‐scale reproducing kernel particle methods for large deformation problems , 1998 .

[4]  J. S. Park,et al.  Automatic remeshing in finite element simulation of metal forming processes by guide grid method , 1991 .

[5]  Hoon Huh,et al.  Eulerian finite-element modeling of the extrusion process for work-hardening materials with the extended concept of limit analysis , 1993 .

[6]  Wing Kam Liu,et al.  Reproducing kernel particle methods , 1995 .

[7]  Zbigniew Gronostajski,et al.  Physical and mathematical modelling of extrusion processes , 2000 .

[8]  Weimin Han,et al.  Reproducing kernel element method Part II: Globally conforming Im/Cn hierarchies , 2004 .

[9]  Antti Korhonen,et al.  Comparison of two commercial FEM codes in cold extrusion simulation , 1994 .

[10]  Wing Kam Liu,et al.  Reproducing Kernel Particle Methods for large deformation analysis of non-linear structures , 1996 .

[11]  Gennady Mishuris,et al.  On the dead-zone formation and limit analysis in axially symmetric extrusion , 2001 .

[12]  Jiun-Shyan Chen,et al.  A stabilized conforming nodal integration for Galerkin mesh-free methods , 2001 .

[13]  Jian Cao,et al.  Reproducing kernel element method Part III: Generalized enrichment and applications , 2004 .

[14]  Yi Qin,et al.  Research dedicated to the development of advanced metal-forming technologies , 2004 .

[15]  Jie Zhou,et al.  Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation , 2004 .

[16]  Jie Zhou,et al.  A comparative study on iso-speed extrusion and isothermal extrusion of 6061 Al alloy using 3D FEM simulation , 2001 .

[17]  Yasunori Saotome,et al.  Superplastic backward microextrusion of microparts for micro-electro-mechanical systems , 2001 .

[18]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .