Titanium nitride oxidation chemistry: An x‐ray photoelectron spectroscopy study

We report a study of the oxidation of TiN. In previous work, the oxidation kinetics for 350–450 °C were reported and an initiation time prior to fast oxidation was identified. In this study, x‐ray photoelectron spectroscopy was used to investigate the oxidation mechanisms at 350 °C during this initiation time period. The oxide thickness increases slowly with oxidation time and the film appears to change from an amorphous TiO2 layer to a crystalline TiO2 layer. Spectral features which are intermediate between TiO2 and TiN are reported and a model involving grain boundary oxidation is proposed. One of the thicker oxides studied was annealed in vacuum to 700 °C. Following oxidation, some of the capping oxide and much of the intermediate material is no longer in the analysis volume and we suggest that the oxygen and nitrogen is being dissolved into the bulk in much the same way that nonevaporable getters are activated before use.

[1]  M. Wittmer,et al.  Oxidation kinetics of TiN thin films , 1981 .

[2]  K. Pourrezaei,et al.  Transmission electron microscopy studies of brown and golden titanium nitride thin films as diffusion barriers in very large scale integrated circuits , 1988 .

[3]  S. Kanamori.  Investigation of reactively sputtered TiN films for diffusion barriers , 1986 .

[4]  M. Wittmer,et al.  The use of titanium-based contact barrier layers in silicon technology , 1982 .

[5]  M. J. Vasile,et al.  The characterization of titanium nitride by x-ray photoelectron spectroscopy and Rutherford backscattering , 1990 .

[6]  I. Suni,et al.  Performance of titanium nitride diffusion barriers in aluminum–titanium metallization schemes for integrated circuits , 1985 .

[7]  J. Nickerson,et al.  Low temperature oxidation behavior of reactively sputtered TiN by x‐ray photoelectron spectroscopy and contact resistance measurements , 1986 .

[8]  T. Chou,et al.  Characterization of titanium nitride thin films , 1990 .

[9]  Y. Homma,et al.  LPCVD TiN as Barrier Layer in VLSI , 1989 .

[10]  Applications of TiN thin films in silicon device technology , 1982 .

[11]  Harland G. Tompkins,et al.  The initial stages of the oxidation of titanium nitride , 1992 .

[12]  S. Nam,et al.  Study of growth rate and failure mode of chemically vapour deposited TiN, TiCxNy and TiC on cemented tungsten carbide , 1982 .

[13]  H. Joswig,et al.  Advanced metallization of very-large-scale integration devices , 1989 .

[14]  J. Perrière,et al.  Surface oxidation of TiNx films , 1991 .

[15]  K. Pourrezaei,et al.  Failure mechanisms of TiN thin film diffusion barriers , 1988 .

[16]  H. Hoffmann,et al.  Diffusion barrier properties of Ti/TiN investigated by transmission electron microscopy , 1990 .

[17]  L. Toth.  Transition Metal Carbides and Nitrides , 1971 .

[18]  M. Nicolet,et al.  Thermal Oxidation of Reactively Sputtered Titanium Nitride and Hafnium Nitride Films , 1983 .

[19]  L. Porte,et al.  Vacancy effects in the x-ray photoelectron spectra of Ti N x , 1983 .

[20]  N. Shinn,et al.  Strain‐induced surface reactivity: Low temperature Cr/W(110) nitridation , 1991 .

[21]  W. A. Dench,et al.  Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids , 1979 .

[22]  H. Tompkins.  Oxidation of titanium nitride in room air and in dry O2 , 1991 .

[23]  J. Bucher,et al.  R.F. reactively sputtered TiN: Characterization and adhesion to materials of technical interest , 1984 .