Experimental Investigation into a Novel Supersaturated Saline Drilling Fluid Available in Anhydrite Formation: A Case study of Missan Oilfields, Iraq

[1]  Md. Tauhidur Rahman,et al.  An Overview on the potential application of ionic liquids in shale stabilization processes , 2020 .

[2]  S. Elkatatny.  Enhancing the Rheological Properties of Water-Based Drilling Fluid Using Micronized Starch , 2019, Arabian Journal for Science and Engineering.

[3]  H. Jia,et al.  The Feasibility for Potassium-Based Phosphate Brines To Serve as High-Density Solid-Free Well-Completion Fluids in High-Temperature/High-Pressure Formations , 2018, SPE Journal.

[4]  Shawn D. Taylor,et al.  Experimental Investigation of Asphaltene-Induced Formation Damage Caused by Pressure Depletion of Live Reservoir Fluids in Porous Media , 2018, SPE Journal.

[5]  Wei Xu,et al.  Effects of Aging on the Multiscale Properties of SBS-Modified Asphalt , 2018, Arabian Journal for Science and Engineering.

[6]  V. Mahto,et al.  Experimental Investigations and Optimizations of Rheological Behavior of Drilling Fluids Using RSM and CCD for Gas Hydrate-Bearing Formation , 2018 .

[7]  M. Enamul Hossain,et al.  Development of an Environmentally-Friendly Water-Based Mud System Using Natural Materials , 2017, Arabian Journal for Science and Engineering.

[8]  A. Amer,et al.  Drilling Through Salt Formations: A Drilling Fluids Review , 2016 .

[9]  Cnooc Iraq.  Research of Ultra-high Density and Supersaturated Brine Drilling Fluid System , 2016 .

[10]  Farizal Hakiki,et al.  Surfactant-Polymer Coreflood Simulation and Uncertainty Analysis Derived from Laboratory Study , 2015 .

[11]  Damian Dion Salam,et al.  Is Epoxy-Based Polymer Suitable for Water Shut-Off Application? , 2015 .

[12]  J. Deville,et al.  Novel Thermally Stable High-Density Brine-Based Drill-In Fluids for HP/HT Applications , 2015 .

[13]  M. Al‐harthi,et al.  LDPE Filled with LLDPE/Starch Masterbatch: Rheology, Morphology and Thermal Analysis , 2014 .

[14]  A. Supee,et al.  Effects of Surfactant-Polymer Formulation and Salinities Variation Towards Oil Recovery , 2014 .

[15]  Jia Guan-chen.  Performance of high-density brine-based drilling fluid with high-temperature , 2014 .

[16]  Z. Xiaoping,et al.  Research and development of a saturated saltwater drilling fluid system with high density and high temperature resistance , 2012 .

[17]  Wei Li,et al.  The Application of Polymer-sulfonated Saturated Salt Based Mud System on the Right Bank of the Amu Darya in Turkmenistan , 2012 .

[18]  Hu Zhiyu.  MAINTENANCE TECHNOLOGY OF HIGH-DENSITY SATURATED BRINE DRILLING FLUID DURING DRILLING INTO SALT-GYPSUM LAYER , 2011 .

[19]  R. Ahmed,et al.  Properties of Salt Formations Essential for Modeling Instabilities While Drilling , 2011 .

[20]  Xu Guanghui.  Characteristics of Formate and Organic Salt Base Fluid , 2011 .

[21]  T. Akers.  Salinity-Based Pump-and-Dump Strategy for Drilling Salt With Supersaturated Fluids , 2011 .

[22]  F. J. Santarelli,et al.  Drilling Through Salt: Constitutive Behavior And Drilling Strategies , 2004 .

[23]  D. Knox,et al.  Application of a Novel, High-Density, Brine-Based, Biopolymer-Free Reservoir Drilling Fluid: A Case Study , 2002 .

[24]  N. Kemp.  Mutual Solubility of Salts in Drilling and Completion Fluids , 1990 .