Linewidth calibration using a metrological atomic force microscope with a tip-tilting mechanism

[1]  Richard A. Allen,et al.  RM 8111: Development of a Prototype Linewidth Standard , 2006, Journal of research of the National Institute of Standards and Technology.

[2]  Osamu Sato,et al.  Bilateral comparison of 25 nm pitch nanometric lateral scales for metrological scanning probe microscopes , 2010 .

[3]  Li-Chen Fu,et al.  Effective Tilting Angles for a Dual Probes AFM System to Achieve High-Precision Scanning , 2016, IEEE/ASME Transactions on Mechatronics.

[4]  Alok Vaid,et al.  Metrology capabilities and needs for 7nm and 5nm logic nodes , 2017, Advanced Lithography.

[5]  Yueming Hua,et al.  Three-dimensional imaging of undercut and sidewall structures by atomic force microscopy. , 2011, The Review of scientific instruments.

[6]  Luca Grella,et al.  Sub-50-nm isolated line and trench width artifacts for CD metrology , 2004, SPIE Advanced Lithography.

[7]  Ndubuisi G. Orji,et al.  Effects of lateral tip control in CD-AFM width metrology , 2014 .

[8]  Ryosuke Kizu,et al.  Development of a metrological atomic force microscope with a tip-tilting mechanism for 3D nanometrology , 2018 .

[9]  Hui Xie,et al.  Advances in the atomic force microscopy for critical dimension metrology , 2016 .

[10]  Gaoliang Dai,et al.  Measurements of CD and sidewall profile of EUV photomask structures using CD-AFM and tilting-AFM , 2014 .

[11]  Vladimir Mancevski,et al.  Development of a dual-probe Caliper CD-AFM for near model-independent nanometrology , 2002, SPIE Advanced Lithography.

[12]  B. Taylor,et al.  Status Report on the ISO/IEC/OIML/BIPM Guide, Expression of Uncertainty in Measurement , 1992 .

[13]  Gaoliang Dai,et al.  Development and characterisation of a new line width reference material , 2015 .

[14]  Richard A. Allen,et al.  Traceable calibration of critical-dimension atomic force microscope linewidth measurements with nanometer uncertainty , 2005 .

[15]  Ronald G. Dixson,et al.  Comparison of line width calibration using critical dimension atomic force microscopes between PTB and NIST , 2017 .

[16]  T. Terasawa,et al.  Side-wall measurement using tilt-scanning method in atomic force microscope , 2005, Digest of Papers Microprocesses and Nanotechnology 2005.

[17]  Hui Xie,et al.  Development of Three-Dimensional Atomic Force Microscope for Sidewall Structures Imaging With Controllable Scanning Density , 2016, IEEE/ASME Transactions on Mechatronics.

[18]  Ichiko Misumi,et al.  25 nm pitch comparison between a traceable x-ray diffractometer and a metrological atomic force microscope , 2011 .

[19]  Chao-Chang A. Chen,et al.  Precision Measurement of Sub-50 nm Linewidth by Stitching Double-Tilt Images , 2010 .