A 6 Bit Vector-Sum Phase Shifter With a Decoder Based Control Circuit for X-Band Phased-Arrays

This letter presents a 6 bit vector-sum phase shifter with a novel control circuitry for X-band phased-arrays using a 0.25 μm SiGe BiCMOS technology. A balanced active balun and highly accurate I/Q network are employed to generate the reference in-phase and quadrature vectors. The desired phase is synthesized by modulating and summing the generated reference vectors using current steering VGAs that are controlled by a decoder based control circuit. The phase shifter resulted in a measured RMS phase error between 9.6-11.7 GHz and between 8.2-12 GHz, achieving 6 bit phase resolution. The chip size is 1.87 × 0.88 mm 2, excluding pads. To the best of authors' knowledge, this is the first demonstration of a digitally controlled 6 bit vector-sum phase shifter for X-band.

[1]  Gabriel M. Rebeiz,et al.  A 6–18 GHz 5-bit active phase shifter , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[2]  Can Caliskan,et al.  An X-band 6-bit active phase shifter , 2014, 2014 IEEE 14th Topical Meeting on Silicon Monolithic Integrated Circuits in Rf Systems.

[3]  John D. Cressler,et al.  5 bit, silicon-based, X-band phase shifter using a hybrid pi/t high-pass/low-pass topology , 2008 .

[4]  Songcheol Hong,et al.  Design of X-band 6-bit CMOS phase shifter for phased array T/R modules , 2009 .

[5]  Carlos E. Saavedra,et al.  Full 360$^{\circ }$ Vector-Sum Phase-Shifter for Microwave System Applications , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[6]  Moon-Kyu Cho,et al.  An X-Band 5 Bit Phase Shifter With Low Insertion Loss in 0.18 $\mu{\rm m}$ SOI Technology , 2012, IEEE Microwave and Wireless Components Letters.

[7]  Gabriel M. Rebeiz,et al.  0.13-$\mu$m CMOS Phase Shifters for X-, Ku-, and K-Band Phased Arrays , 2007, IEEE Journal of Solid-State Circuits.