Isothermal Vapor–Liquid Equilibrium of the Binary Mixture of Octafluoropropane (R218) + Tetrafluoromonochloroethane (R124) at Temperatures from 283.15 to 323.15 K

[1]  Youhao Liao,et al.  Achieving a Highly Stable Electrode/Electrolyte Interface for a Nickel-Rich Cathode via an Additive-Containing Gel Polymer Electrolyte. , 2022, ACS applied materials & interfaces.

[2]  Samer I. Al-Gharabli,et al.  Nitrogen plasma modification boosts up the hemocompatibility of new PVDF-carbon nanohorns composite materials with potential cardiological and circulatory system implants application. , 2022, Biomaterials advances.

[3]  Xigang Yuan,et al.  Application of the thermally coupled extractive distillation for recycling octafluoropropane based on thermoeconomic analysis , 2021, Separation and Purification Technology.

[4]  Yanxing Zhao,et al.  Binary mixture isothermal vapour-liquid equilibrium: Trifluoromethane (R23) + octafluoropropane (R218) at the temperature from 223.150 K to 263.150 K , 2021 .

[5]  Yong Zhang,et al.  Analysis of lower GWP and flammable alternative refrigerants , 2021 .

[6]  A. Denoyer,et al.  COMPARING INTRAVITREAL AIR AND GAS FOR THE TREATMENT OF VITREOMACULAR TRACTION. , 2019, Retina.

[7]  Yuming Yang,et al.  Synthesis of carbon quantum dots to fabricate ultraviolet‐shielding poly(vinylidene fluoride) films , 2019, Journal of Applied Polymer Science.

[8]  C. Detrembleur,et al.  Straightforward Synthesis of Well-Defined Poly(vinylidene fluoride) and Its Block Copolymers by Cobalt-Mediated Radical Polymerization , 2019, Macromolecules.

[9]  W. M. Nelson,et al.  Isothermal vapor-liquid equilibrium data for the 1,1,2,3,3,3-hexafluoroprop-1-ene +1,1,2,2,3,3,4,4-octafluorocyclobutane binary system : measurement and modeling from (292 to 352) K and pressures up to 2.6 Mpa , 2015 .

[10]  Guodong Kang,et al.  Application and modification of poly(vinylidene fluoride) (PVDF) membranes – A review , 2014 .

[11]  Robert Gross,et al.  The future of lithium availability for electric vehicle batteries , 2014 .

[12]  H. Choi,et al.  Measurement of Vapor–Liquid Equilibria for the Binary Mixture of Octafluoropropane and Hexafluoropropylene Oxide Containing Octafluorocyclobutane , 2014 .

[13]  Chuanhui Xu,et al.  Highly toughened poly(vinylidene fluoride)/nitrile butadiene rubber blends prepared via peroxide-induced dynamic vulcanization , 2014 .

[14]  S. Lanceros‐Méndez,et al.  Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications , 2013 .

[15]  P. Naidoo,et al.  Isothermal Vapor–Liquid Equilibrium Data and Modeling for the Ethane (R170) + Perfluoropropane (R218) System at Temperatures from (264 to 308) K , 2013 .

[16]  Hwayong Kim,et al.  Vapor–liquid equilibria of the carbon dioxide (CO2) + 2,2-dichloro-1,1,1-trifluoroethane (R123) system and carbon dioxide (CO2) + 1-chloro-1,2,2,2-tetrafluoroethane (R124) system , 2007 .

[17]  G. Hillis,et al.  Contrast echocardiography using intravenous octafluoropropane and real-time perfusion imaging predicts functional recovery after acute myocardial infarction. , 2003, Journal of the American Society of Echocardiography : official publication of the American Society of Echocardiography.

[18]  Hwayong Kim,et al.  Vapor−Liquid Equilibria for 1,1,1,2-Tetrafluoroethane + 1-Chloro-1,2,2,2-tetrafluoroethane and 1-Chloro-1,2,2,2-tetrafluoroethane + 1-Chloro-1,1-difluoroethane Systems , 1996 .

[19]  W. Blanke,et al.  pvT Measurements on 1-Chloro-1,2,2,2-tetrafluoroethane (R124) along the Gas−Liquid Boundary Curve between 293 K and 395 K and in the Liquid State from 120 K to 268 K , 1996 .

[20]  Jong Sung Lim,et al.  Vapor−Liquid Equilibria for Hydrogen Fluoride + Difluoromethane, + 1,1,1,2-Tetrafluoroethane, and + 1-Chloro-1,2,2,2-tetrafluoroethane at 283.3 and 298.2 K , 1996 .

[21]  A. M. Silva,et al.  Measurements of the Vapor Pressures of Difluoromethane, 1-Chloro-1,2,2,2-tetrafluoroethane, and Pentafluoroethane , 1994 .

[22]  L. J. V. Poolen,et al.  Coexisting densities and vapor pressures of refrigerants R-22, R-134a, and R-124 at 300–395 K , 1994 .

[23]  L. Weber,et al.  Vapor pressures and gas-phasePVT data for 1-Chloro-1,2,2,2-tetrafluoroethane (R124) , 1994 .

[24]  D. Robinson,et al.  High-pressure vapor-liquid equilibrium phase properties of the octafluoropropane (K-218)-chlorodifluoromethane (Freon-22) binary system , 1992 .

[25]  M. Michelsen,et al.  High‐pressure vapor‐liquid equilibrium with a UNIFAC‐based equation of state , 1990 .

[26]  H. Kubota,et al.  Thermodynamic properties of 1-chloro-1,2,2,2-tetrafluoroethane (R124) , 1988 .

[27]  Paul M. Mathias,et al.  Extension of the Peng-Robinson equation of state to complex mixtures: Evaluation of the various forms of the local composition concept , 1983 .

[28]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[29]  J. Prausnitz,et al.  LOCAL COMPOSITIONS IN THERMODYNAMIC EXCESS FUNCTIONS FOR LIQUID MIXTURES , 1968 .

[30]  James A. Brown.  Physical Properties of Perfluoropropane. , 1963 .

[31]  J. D. V. D. Waals.  Molekulartheorie eines Körpers, der aus zwei verschiedenen Stoffen besteht , 1890 .