The Aeronautical Sciences Project under NASA’s Fundamental Aeronautics Program is interested in the development of novel measurement technologies, such as optical surface measurements for the in situ health monitoring of critical constituents of the internal flow path. In situ health monitoring has the potential to detect flaws, i.e. cracks in key components, such as engine turbine disks, before the flaws lead to catastrophic failure. The present study, aims to further validate and develop an optical strain measurement technique to measure the radial growth and strain field of an already cracked disk, mimicking the geometry of a sub-scale turbine engine disk, under loaded conditions in the NASA Glenn Research Center’s High Precision Rotordynamics Laboratory. The technique offers potential fault detection by imaging an applied high-contrast random speckle pattern under unloaded and loaded conditions with a CCD camera. Spinning the cracked disk at high speeds (loaded conditions) induces an external load, resulting in a radial growth of the disk of approximately 50.0-μm in the flawed region and hence, a localized strain field. When imaging the cracked disk under static conditions, the disk will be undistorted; however, during rotation the cracked region will grow radially, thus causing the applied particle pattern to be ‘shifted’. The resulting particle displacements between the two images is measured using the two-dimensional cross-correlation algorithms implemented in standard Particle Image Velocimetry (PIV) software to track the disk growth, which facilitates calculation of the localized strain field. A random particle distribution is adhered onto the surface of the cracked disk and two bench top experiments are carried out to evaluate the technique’s ability to measure the induced particle displacements. The disk is shifted manually using a translation stage equipped with a fine micrometer and a hotplate is used to induce thermal growth of the disk, causing the particles to become shifted. For both experiments, reference and test images are acquired before and after the induced shifts, respectively, and then processed using PIV software. The controlled manual translation of the disk resulted in detection of the particle displacements accurate to ~1.75% of full scale and the thermal expansion experiment resulted in successful detection of the disk’s thermal growth as compared to the calculated thermal expansion results. After validation of the technique through the induced shift experiments, the technique is implemented in the Rotordynamics Lab for preliminary assessment in a simulated engine environment. The discussion of the findings and plans for future work to improve upon the results are addressed in the paper.
[1]
Carolyn R. Mercer,et al.
Optical Metrology for Fluids, Combustion and Solids
,
2003
.
[2]
J. Westerweel.
Theoretical analysis of the measurement precision in particle image velocimetry
,
2000
.
[3]
Mark R. Woike.
Evaluation of a Microwave Blade Tip Clearance Sensor for Propulsion Health Monitoring
,
2010
.
[4]
Mark R. Woike,et al.
Investigation of a cross-correlation based optical strain measurement technique for detecting radial growth on a rotating disk
,
2013,
Smart Structures.
[5]
L. Lourenço.
Particle Image Velocimetry
,
1989
.
[6]
Mark R. Woike,et al.
Crack-Detection Experiments on Simulated Turbine Engine Disks in NASA Glenn Research Center's Rotordynamics Laboratory
,
2010
.
[7]
Ronald Adrian,et al.
Multi-point optical measurements of simultaneous vectors in unsteady flow—a review
,
1986
.
[8]
Mark R. Woike,et al.
Investigation of a moiré based crack detection technique for propulsion health monitoring
,
2012,
Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[9]
Hugh D. Young.
Fundamentals of Mechanics and Heat
,
1964
.
[10]
Richard D. Keane,et al.
Theory of cross-correlation analysis of PIV images
,
1992
.
[11]
Mark R. Woike,et al.
Testing of a Microwave Blade Tip Clearance Sensor at the NASA Glenn Research Center
,
2013
.
[12]
A. Prasad.
Particle image velocimetry
,
2000
.
[13]
Mark P. Wernet,et al.
Fuzzy logic enhanced digital PIV processing software
,
1999,
ICIASF 99. 18th International Congress on Instrumentation in Aerospace Simulation Facilities. Record (Cat. No.99CH37025).
[14]
Mark R. Woike,et al.
Propulsion health monitoring of a turbine engine disk using spin test data
,
2010,
Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[15]
Mark P. Wernet,et al.
Particle displacement tracking technique and Cramer-Rao lower bound error in centroid estimates from CCD imagery
,
1993
.
[16]
J. Westerweel.
Fundamentals of digital particle image velocimetry
,
1997
.