Energy recovery from ventilation air methane via reverse-flow reactors

Nearly 70% of the methane released from hard coal seams, as the so-called Ventilation Air Methane, is emitted to the atmosphere with the air discharged by the mine ventilation system. Therefore, utilization of this emission, especially with a rational heat recovery becomes an important challenge for hard coal mines. The paper proposes combustion in Thermal Flow Reversal Reactors, currently as the most promising and technically advanced method of solving this problem. The operating principle of such reactors is briefly described with a short review of the current literature on the subject, particularly focussing on aspects of heat recovery. A progress report of research and development activities, carried out in the recent years in the Institute of Chemical Engineering, Polish Academy of Sciences in Gliwice, Poland, has been given. This part provides a brief overview of kinetic studies on thermal combustion, results of experiments carried out on a research and demonstration plant, discussion of computer simulations as well as preliminary analysis of the possibilities of the process intensification. The article draws attention to the possibility of thermal asymmetry formation in the flow reversal reactors. The ways of the process control to prevent asymmetry are also discussed.

[2]  Is it economically feasible to use heterogeneous catalysts for VOC control in regenerative oxidizers , 1996 .

[3]  G. Eigenberger,et al.  On the efficient simulation and analysis of regenerative processes in cyclic operation , 1997 .

[4]  G. Bunimovich,et al.  Control of Volatile Organic Compounds by the Catalytic Reverse Process , 1995 .

[5]  J. M. Somers,et al.  Thermal oxidation of coal mine ventilation air methane , 2008 .

[6]  Johannes Khinast,et al.  Dependence of Cooled Reverse-Flow Reactor Dynamics on Reactor Model , 1999 .

[7]  M. Jaschik,et al.  Thermal combustion of lean methane–air mixtures: Flow reversal research and demonstration reactor model and its validation , 2012 .

[8]  M. Kubíček,et al.  Modelling of a tubular catalytic reactor with flow reversal , 1992 .

[9]  Ulrich Nieken,et al.  Thermal pattern formation and process intensification in chemical reaction engineering , 2007 .

[10]  Andrew G. Salinger,et al.  The direct calculation of periodic states of the reverse flow reactor—II. Multiplicity and instability , 1996 .

[11]  Hua Guo,et al.  An assessment of mine methane mitigation and utilisation technologies , 2005 .

[12]  Krzysztof Gosiewski,et al.  Combustion of lean methane–air mixtures in monolith beds: Kinetic studies in low and high temperatures , 2015 .

[13]  Robert E. Hayes,et al.  Heat Extraction from a Flow Reversal Reactor in Lean Methane Combustion , 2005 .

[14]  Robert E. Hayes,et al.  Repetitive model predictive control of a reverse flow reactor , 2007 .

[15]  G. Bunimovich,et al.  Reverse-Flow Operation in Fixed Bed Catalytic Reactors , 1996 .

[16]  K. Gosiewski.  Efficiency of heat recovery versus maximum catalyst temperature in a reverse-flow combustion of methane , 2005 .

[17]  Krzysztof Gosiewski.  Effective approach to cyclic steady state in the catalytic reverse-flow combustion of methane , 2004 .

[18]  Yurii Sh. Matros,et al.  Theory and application of unsteady catalytic detoxication of effluent gases from sulfur dioxide, nitrogen oxides and organic compounds , 1988 .

[19]  Dan Luss,et al.  Complex dynamic features of a cooled reverse‐flow reactor , 1998 .

[20]  Deo,et al.  Mitigation of methane emissions from coal mine ventilation air , 1999 .

[21]  Krzysztof Gosiewski,et al.  Catalytic or thermal reversed flow combustion of coal mine ventilation air methane: What is better choice and when? , 2014 .

[22]  Min Chen,et al.  Efficient Synthesis of 1-Acetylpyrene Using [Bmim]Cl–FeCl3 Ionic Liquid as Dual Catalyst and Solvent , 2013 .

[23]  K. Gatnar.  Układy energetyczne wykorzystujące metan z odmetanowania kopalń JSW SA jako element lokalnego rynku energii , 2007 .

[24]  Krzysztof Gosiewski,et al.  Homogeneous vs. catalytic combustion of lean methane—air mixtures in reverse-flow reactors , 2008 .

[25]  K. Gosiewski,et al.  Simplified Kinetic Model for Thermal Combustion of Lean Methane–Air Mixtures in a Wide Range of Temperatures , 2013 .

[26]  Gerhart Eigenberger,et al.  Autothermal fixed-bed reactor concepts , 2000 .

[27]  Wipo.  Patent Cooperation Treaty , 2015 .

[28]  Hector Budman,et al.  Control of a nonadiabatic packed bed reactor under periodic flow reversal , 1996 .

[29]  Hassan Hammouri,et al.  Observer based multivariable control of a catalytic reverse flow reactor: comparison between LQR and MPC approaches , 2004, Comput. Chem. Eng..

[30]  Françoise Couenne,et al.  Model predictive control of a catalytic reverse flow reactor , 2003, IEEE Trans. Control. Syst. Technol..

[31]  Dan Luss,et al.  Mapping regions with different bifurcation diagrams of a reverse‐flow reactor , 1997 .

[32]  Ulrich Nieken,et al.  Control of the ignited steady state in autothermal fixed-bed reactors for catalytic combustion , 1994 .

[33]  M. Jaschik,et al.  A study on thermal combustion of lean methane–air mixtures: Simplified reaction mechanism and kinetic equations , 2009 .