A Fuzzy Fusion Rotating Machinery Fault Diagnosis Framework Based on the Enhancement Deep Convolutional Neural Networks

Some artificial intelligence algorithms have gained much attention in the rotating machinery fault diagnosis due to their robust nonlinear regression properties. In addition, existing deep learning algorithms are usually dependent on single signal features, which would lead to the loss of some information or incomplete use of the information in the signal. To address this problem, three kinds of popular signal processing methods, including Fast Fourier Transform (FFT), Short-Time Fourier Transform (STFT) and directly slicing one-dimensional data into the two-dimensional matrix, are used to create four different datasets from raw vibration signal as the input data of four enhancement Convolutional Neural Networks (CNN) models. Then, a fuzzy fusion strategy is used to fuse the output of four CNN models that could analyze the importance of each classifier and explore the interaction index between each classifier, which is different from conventional fusion strategies. To show the performance of the proposed model, an artificial fault bearing dataset and a real-world bearing dataset are used to test the feature extraction capability of the model. The good anti-noise and interpretation characteristics of the proposed method are demonstrated as well.

[1]  Bogdan Gabrys,et al.  Classifier selection for majority voting , 2005, Inf. Fusion.

[2]  Xiaofeng Liu,et al.  Machinery fault diagnostics based on fuzzy measure and fuzzy integral data fusion techniques , 2009 .

[3]  Andrey Temko,et al.  Fuzzy integral based information fusion for classification of highly confusable non-speech sounds , 2008, Pattern Recognit..

[4]  Ming Guo,et al.  Application to induction motor faults diagnosis of the amplitude recovery method combined with FFT , 2010 .

[5]  Siu-Kui Au,et al.  Ambient modal identification of a primary-secondary structure by Fast Bayesian FFT method , 2012 .

[6]  Hamid Reza Karimi,et al.  Vibration analysis for bearing fault detection and classification using an intelligent filter , 2014 .

[7]  Moncef Gabbouj,et al.  Real-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks , 2016, IEEE Transactions on Biomedical Engineering.

[8]  Walter Sextro,et al.  Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification , 2016, PHM Society European Conference.

[9]  Fei Shen,et al.  Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks , 2018, IEEE Transactions on Industrial Electronics.

[10]  Derek T. Anderson,et al.  Fuzzy Choquet Integration of Deep Convolutional Neural Networks for Remote Sensing , 2018 .

[11]  Haidong Shao,et al.  A novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders , 2018 .

[12]  Germain Forestier,et al.  Deep learning for time series classification: a review , 2018, Data Mining and Knowledge Discovery.

[13]  Ruqiang Yan,et al.  Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning , 2019, IEEE Transactions on Industrial Informatics.

[14]  Jay Lee,et al.  Convolutional Neural Network Based Rolling-Element Bearing Fault Diagnosis for Naturally Occurring and Progressing Defects Using Time-Frequency Domain Features , 2019, 2019 Prognostics and System Health Management Conference (PHM-Paris).

[15]  Lin Li,et al.  An empirical signal separation algorithm for multicomponent signals based on linear time-frequency analysis , 2019, Mechanical Systems and Signal Processing.

[16]  Weiwen Peng,et al.  Estimation of Bearing Remaining Useful Life Based on Multiscale Convolutional Neural Network , 2019, IEEE Transactions on Industrial Electronics.

[17]  Adam Glowacz,et al.  Fault diagnosis of single-phase induction motor based on acoustic signals , 2019, Mechanical Systems and Signal Processing.

[18]  Dapeng Tao,et al.  Domain-Weighted Majority Voting for Crowdsourcing , 2019, IEEE Transactions on Neural Networks and Learning Systems.

[19]  Huihui Miao,et al.  Joint Learning of Degradation Assessment and RUL Prediction for Aeroengines via Dual-Task Deep LSTM Networks , 2019, IEEE Transactions on Industrial Informatics.

[20]  Ruqiang Yan,et al.  Generative adversarial networks for data augmentation in machine fault diagnosis , 2019, Comput. Ind..

[21]  Xinyu Li,et al.  A new ensemble convolutional neural network with diversity regularization for fault diagnosis , 2020, Journal of Manufacturing Systems.

[22]  Ruqiang Yan,et al.  Deep Learning Algorithms for Rotating Machinery Intelligent Diagnosis: An Open Source Benchmark Study , 2020, ISA transactions.

[23]  Ping Wang,et al.  Deep transfer multi-wavelet auto-encoder for intelligent fault diagnosis of gearbox with few target training samples , 2020, Knowl. Based Syst..

[24]  Diganta Misra.  Mish: A Self Regularized Non-Monotonic Activation Function , 2020, BMVC.

[25]  Jianbo Yu,et al.  One-Dimensional Residual Convolutional Autoencoder Based Feature Learning for Gearbox Fault Diagnosis , 2020, IEEE Transactions on Industrial Informatics.

[26]  Kemal Polat,et al.  The Effect of Training and Testing Process on Machine Learning in Biomedical Datasets , 2020, Mathematical Problems in Engineering.

[27]  Zhibin Zhao,et al.  Few-shot transfer learning for intelligent fault diagnosis of machine , 2020 .

[28]  Pawan Kumar Singh,et al.  Fuzzy Integral-Based CNN Classifier Fusion for 3D Skeleton Action Recognition , 2021, IEEE Transactions on Circuits and Systems for Video Technology.

[29]  Jiafu Wan,et al.  Intelligent Fault Diagnosis of Rotor-Bearing System Under Varying Working Conditions With Modified Transfer Convolutional Neural Network and Thermal Images , 2020, IEEE Transactions on Industrial Informatics.

[30]  Jianping Xuan,et al.  Intelligent fault recognition framework by using deep reinforcement learning with one dimension convolution and improved actor-critic algorithm , 2021, Adv. Eng. Informatics.

[31]  Alexandros Stergiou,et al.  Refining activation downsampling with SoftPool , 2021, 2021 IEEE/CVF International Conference on Computer Vision (ICCV).

[32]  Hamid Reza Karimi,et al.  Residual wide-kernel deep convolutional auto-encoder for intelligent rotating machinery fault diagnosis with limited samples , 2021, Neural Networks.

[33]  Xinyu Shao,et al.  Intelligent fault diagnosis of rotating machinery based on continuous wavelet transform-local binary convolutional neural network , 2021, Knowl. Based Syst..

[34]  Derek T. Anderson,et al.  Explainable AI for the Choquet Integral , 2021, IEEE Transactions on Emerging Topics in Computational Intelligence.

[35]  Zhuang Ye,et al.  Deep morphological convolutional network for feature learning of vibration signals and its applications to gearbox fault diagnosis , 2021 .

[36]  Uday Kumar,et al.  A novel approach of multisensory fusion to collaborative fault diagnosis in maintenance , 2021, Inf. Fusion.

[37]  Gabor Manhertz,et al.  STFT spectrogram based hybrid evaluation method for rotating machine transient vibration analysis , 2021, Mechanical Systems and Signal Processing.

[38]  Dan Zhang,et al.  A New Interpretable Learning Method for Fault Diagnosis of Rolling Bearings , 2021, IEEE Transactions on Instrumentation and Measurement.

[39]  D. Pucicki,et al.  Fast and efficient approach for multi-component quantum wells analysis based on FFT , 2021, Measurement.

[40]  Aiguo Chen,et al.  Distilling the Knowledge of Multiscale Densely Connected Deep Networks in Mechanical Intelligent Diagnosis , 2021, Wirel. Commun. Mob. Comput..

[41]  Ruqiang Yan,et al.  Intelligent Fault Diagnosis for Planetary Gearbox Using Time-Frequency Representation and Deep Reinforcement Learning , 2021, IEEE/ASME Transactions on Mechatronics.

[42]  M. Mitra,et al.  Explainable 1-D convolutional neural network for damage detection using Lamb wave , 2022 .