Concrete early-age strength monitoring using embedded piezoelectric transducers

At early ages of concrete structures, strength monitoring is important to determine the structures' readiness for service. Piezoelectric-based strength monitoring methods provide an innovative experimental approach to conduct concrete strength monitoring at early ages. In this paper, piezoelectric transducers in the form of 'smart aggregates' are embedded into the concrete specimen during casting. Piezoceramic materials can be used as actuators to generate high frequency vibrating waves, which propagate within concrete structures; meanwhile, they can also be used as sensors to detect the waves. The smart aggregate is a one cubic inch, pre-cast concrete block with a wired, embedded PZT (lead zirconate titanate, a type of piezoceramic) patch. The strength development of concrete structures is monitored by observing the development of harmonic response amplitude from the embedded piezoelectric sensor at early ages. From experimental results, the amplitude of the harmonic response decreases with increasing concrete strength. The concrete strength increases at a fast rate during the first few days and at a decreasing rate after the first week. Concordantly, the amplitude of the harmonic response from the piezoelectric sensor drops rapidly for the first week and continues to drop slowly as hydration proceeds, matching the development of the concrete strength at early ages. Concrete is heterogeneous and anisotropic, which makes it difficult to analyze mathematically. Fuzzy logic has the advantage of conducting analysis without requiring a mathematical model. In this paper, a fuzzy logic system is trained to correlate the harmonic amplitude with the concrete strength based on the experimental data. The experimental results show that the concrete strength estimated by the trained fuzzy correlation system matches the experimental strength data. The proposed piezoelectric-based monitoring method has the potential to be applied to strength monitoring of concrete structures at early ages.

[1]  John J Roller,et al.  EFFECT OF CURING TEMPERATURES ON HIGH STRENGTH CONCRETE BRIDGE GIRDERS , 2003 .

[2]  Gangbing Song,et al.  Health monitoring of a concrete structure using piezoceramic materials , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  S. Abo-Qudais,et al.  Effect of concrete mixing parameters on propagation of ultrasonic waves , 2005 .

[4]  Dai Huichao,et al.  Application of fiber optical sensing technology to the Three Gorges Project , 2004 .

[5]  Surendra P. Shah,et al.  Temperature effects on strength evaluation of cement- based materials with ultrasonic wave reflection technique , 2005 .

[6]  Stephen Yurkovich,et al.  Fuzzy Control , 1997 .

[7]  Th. Voigt,et al.  Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete , 2005 .

[8]  Laurent Mevel,et al.  Health monitoring of a concrete three-span bridge , 2000 .

[9]  K. Tseng,et al.  Smart piezoelectric transducers for in situ health monitoring of concrete , 2004 .

[10]  Jenn-Chuan Chern,et al.  The health monitoring of a prestressed concrete beam by using fiber Bragg grating sensors , 2004 .

[11]  J. Olek,et al.  EFFECT OF TEMPERATURE-MATCH-CURING ON FREEZE-THAW AND SCALING RESISTANCE OF HIGH-STRENGTH CONCRETE , 2004 .

[12]  Bruno Massicotte,et al.  Modeling the Thermal Stresses at Early Ages in a Concrete Monolith , 1997 .

[13]  Ramazan Demirboga,et al.  RELATIONSHIP BETWEEN ULTRASONIC VELOCITY AND COMPRESSIVE STRENGTH FOR HIGH-VOLUME MINERAL-ADMIXTURED CONCRETE , 2004 .

[14]  Zhihui Sun,et al.  Early Age Microstructure Of Portland Cement Mortar Investigated By Ultrasonic Shear Waves And Numerical Simulation , 2005 .

[15]  G. F. Kheder,et al.  Mathematical model for the prediction of cement compressive strength at the ages of 7 and 28 days within 24 hours , 2003 .

[16]  J. Achenbach.  Wave propagation in elastic solids , 1962 .