Utilization of phosphogypsum as raw and calcined material in manufacturing of building products

[1]  Halit Yazıcı,et al.  Utilization of coal combustion byproducts in building blocks , 2007 .

[2]  C. J. Verbeek,et al.  Density and flexural strength of phosphogypsum–polymer composites , 2005 .

[3]  M. Garg,et al.  Study on anhydrite plaster from waste phosphogypsum for use in polymerised flooring composition , 2005 .

[4]  R. McCrindle,et al.  A COMPARISON OF THE PERFORMANCE OF VARIOUS SYNTHETIC GYPSUMS IN PLANT TRIALS DURING THE MANUFACTURING OF OPC CLINKER , 2004 .

[5]  I. Altun,et al.  UTILIZATION OF WEATHERED PHOSPHOGYPSUM AS SET RETARDER IN PORTLAND CEMENT , 2004 .

[6]  Manjit Singh.  Effect of phosphatic and fluoride impurities of phosphogypsum on the properties of selenite plaster , 2003 .

[7]  Sunil Kumar,et al.  Fly ash–lime–phosphogypsum hollow blocks for walls and partitions , 2003 .

[8]  Sunil Kumar.  A perspective study on fly ash-lime gypsum bricks and hollow blocks for low cost housing development , 2002 .

[9]  Manjit Singh,et al.  Treating waste phosphogypsum for cement and plaster manufacture , 2002 .

[10]  Mridul Garg,et al.  Making of anhydrite cement from waste gypsum , 2000 .

[11]  R. Haddad,et al.  Potential use of phosphogypsum in concrete , 1999 .

[12]  M. Garg,et al.  Cementitious binder from fly ash and other industrial wastes , 1999 .

[13]  S. Popov,et al.  Investigation of the possibility of the reutilization of some industrial wastes , 2005 .

[14]  S. Popov,et al.  The possibilities of fly ash and FGD gypsum utilization in manufacturing of building products , 2003 .