Hot stamping of boron steel sheets with tailored properties: A review

[1]  M. Avrami Kinetics of Phase Change. II Transformation‐Time Relations for Random Distribution of Nuclei , 1940 .

[2]  N. J. Hoff,et al.  Approximate analysis of structures in the presence of moderately large creep deformations , 1954 .

[3]  D. P. Koistinen,et al.  A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels , 1959 .

[4]  J. Devaux,et al.  A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—II. Study of classical plasticity for ideal-plastic phases , 1986 .

[5]  M. Bibby,et al.  An algorithm for modelling microstructural development in weld heat-affected zones (part a) reaction kinetics , 1988 .

[6]  L. Meekisho,et al.  A computational model for the prediction of steel hardenability , 1998 .

[7]  S. Nemat-Nasser Experimentally-based Micromechanical Modeling of Metal Plasticity with Homogenization from Micro-to Macro-scale Properties , 1999 .

[8]  Magnus Eriksson Modelling of forming and quenching of ultra high strength steel components for vehicle structures , 2002 .

[9]  M. Geiger,et al.  Basic Investigations on the Hot Stamping Steel 22MnB5 , 2005 .

[10]  Modeling for the FE-Simulation of Warm Metal Forming Processes , 2005 .

[11]  Manfred Geiger,et al.  Characterisation of the Flow Properties of the Quenchenable Ultra High Strength Steel 22MnB5 , 2006 .

[12]  Manfred Geiger,et al.  急冷可能な超高強度鋼22MnB5の流れ特性の特徴づけ | 文献情報 | J-GLOBAL 科学技術総合リンクセンター , 2006 .

[13]  Mats Oldenburg,et al.  Austenite decomposition during press hardening of a boron steel : Computer simulation and test , 2006 .

[14]  Marion Merklein,et al.  Investigation of the thermo-mechanical properties of hot stamping steels , 2006 .

[15]  M. Geiger,et al.  Crash Behaviour of Various Modern Steels Exposed to High Deformation Rates , 2007 .

[16]  Heat Transfer during press hardening , 2007 .

[17]  Greger Bergman,et al.  Experimental and Numerical Evaluation of the Heat Transfer Coefficient in Press Hardening , 2009 .

[18]  Joël Wilsius,et al.  Status and Innovation Trends in Hot Stamping of USIBOR 1500 P , 2008 .

[19]  Kurt Steinhoff,et al.  Components with Optimised Properties due to Advanced Thermo‐mechanical Process Strategies in Hot Sheet Metal Forming , 2008 .

[20]  Manfred Geiger,et al.  Determination of tribological conditions within hot stamping , 2008, Prod. Eng..

[21]  Braham Prakash,et al.  High-temperature friction and wear behaviour of different tool steels during sliding against Al–Si-coated high-strength steel , 2008 .

[22]  Joël Wilsius,et al.  Experimental investigation of friction and wear in hot stamping of Usibor 1500P , 2008 .

[23]  Daniel Duque Múnera,et al.  Innovative Press Hardened Steel Based Laser Welded Blanks Solutions for Weight Savings and Crash Safety Improvements , 2008 .

[24]  Wolfgang Bleck,et al.  The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel , 2008 .

[25]  MEASUREMENT OF FRICTION COEFFICIENT DURING HOT FLAT DRAWING , 2008 .

[26]  A. Barcellona,et al.  Effect of Plastic Hot Deformation on the Hardness and Continuous Cooling Transformations of 22MnB5 Microalloyed Boron Steel , 2009 .

[27]  D. Mohr,et al.  Plasticity and fracture of martensitic boron steel under plane stress conditions , 2009 .

[28]  J. Lechler,et al.  Investigations on the thermal behavior of ultra high strength boron manganese steels within hot stamping , 2009 .

[29]  Pavel Hora,et al.  Modeling and determination of flow curves for the simulation of hot forming; Conference on the International Deep Drawing Research Group (IDDRG 2009); ; Material property data for more effective numerical analysis : proceedings 2009 , 2009 .

[30]  K. Mori,et al.  Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution , 2010 .

[31]  C. J. Tyne,et al.  Kinetics modeling of austenite decomposition for an end-quenched 1045 steel , 2010 .

[32]  Funktionsoptimierte Strukturbauteile im Presshärtprozess , 2010 .

[33]  Characterization of Heat Transfer Coefficients of Tool Materials and Tool Coatings for Hot Stamping of Boron-Manganese Steels , 2010 .

[34]  Investigations into the occurrence of galling during hot forming of Al–Si-coated high-strength steel , 2011 .

[35]  A. Tekkaya,et al.  A review on hot stamping , 2010 .

[36]  M. Worswick,et al.  Effect of cooling rate on the high strain rate properties of boron steel , 2010 .

[37]  Wolfgang Bleck,et al.  Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping , 2011 .

[38]  FE-Simulation of the Heat Transfer by Defined Cooling Conditions during the Hot Stamping Process , 2011 .

[39]  Olof P. Hedegärd,et al.  Tempering of hot-formed steel using induction heating , 2011 .

[40]  L. Pelcastre Hot forming tribology : galling of tools and associated problems , 2011 .

[41]  Jens Kondratiuk,et al.  Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming , 2011 .

[42]  Pavel Hora,et al.  Simulation of the Press Hardening Process and Prediction of the Final Mechanical Material Properties , 2011 .

[43]  S. Bruschi,et al.  Tribological characteristics of high strength steel sheets under hot stamping conditions , 2011 .

[44]  M. Worswick,et al.  Hot forming of boron steels using heated and cooled tooling for tailored properties , 2012 .

[45]  S. L. Roux,et al.  Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel , 2012 .

[46]  Challenges and Advantages in Usage of Zinc-Coated, Press-Hardened Components with Tailored Properties , 2012, BHM Berg- und Hüttenmännische Monatshefte.

[47]  Bernd Hochholdinger,et al.  Simulation des Presshärteprozesses und Vorhersage der mechanischen Bauteileigenschaften nach dem Härten , 2012 .

[48]  M. Worswick,et al.  A strain rate sensitive constitutive model for quenched boron steel with tailored properties , 2012 .

[49]  Stefania Bruschi,et al.  A novel approach to wear testing in hot stamping of high strength boron steel sheets , 2013 .

[50]  Failure analysis of a hat profile with tailored properties subjected to axial compression , 2013 .

[51]  Marion Merklein,et al.  Hot stamping: manufacturing functional optimized components , 2012, Production Engineering.

[52]  New Trends in Laser within the Process Chain of Hotforming Production , 2013 .

[53]  K. Mori,et al.  Tailored die quenching of steel parts having strength distribution using bypass resistance heating in hot stamping , 2013 .

[54]  Stefania Bruschi,et al.  Tribological performances of Zn-based coating in direct hot stamping , 2014 .

[55]  A. H. van den Boogaard,et al.  Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties , 2014 .

[56]  Guangyong Sun,et al.  The finite element analysis of austenite decomposition during continuous cooling in 22MnB5 steel , 2014 .

[57]  Trevor A. Dean,et al.  Materials Modelling for Selective Heating and Press Hardening of Boron Steel Panels with Graded Microstructures , 2014 .

[58]  Taylan Altan,et al.  Testing and modelling of material behaviour and formability in sheet metal forming , 2014 .

[59]  M. Merklein,et al.  Investigations on Austenitization Parameters Influencing Wear Behavior Within Hot Stamping , 2014 .

[60]  M. Worswick,et al.  The influence of martensite, bainite and ferrite on the as-quenched constitutive response of simultaneously quenched and deformed boron steel – Experiments and model , 2014 .

[61]  Investigation into the tribological behaviors of press hardening steels on the tailored conditions , 2015 .

[62]  B. Rolfe,et al.  Sensitivity of the final properties of tailored hot stamping components to the process and material parameters , 2016 .

[63]  M. Merklein,et al.  Modelling kinetics of phase transformation for the indirect hot stamping process to focus on car body parts with tailored properties , 2016 .