Power transformer for a single-stage bidirectional and isolated ac-dc matrix converter for energy storage systems

This paper presents an approach to design the transformer and the link inductor for the high-frequency link matrix converter. The proposed method aims to systematize the design process of the HF-link using analytic and software tools. The models for the characterization of the core and winding losses have been reviewed. Considerations about the practical implementation and construction of the magnetic devices are also provided. The software receives the inputs from the mathematical analysis and runs the optimization to find the best design. A 10 kW / 20 kHz transformer plus a link inductor are designed using this strategy achieving a combined efficiency of 99.32%.

[1]  Johann W. Kolar,et al.  Comprehensive Conceptualization, Design, and Experimental Verification of a Weight-Optimized All-SiC 2 kV/700 V DAB for an Airborne Wind Turbine , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[2]  J. W. Kolar,et al.  Medium frequency transformers for solid-state-transformer applications — Design and experimental verification , 2013, 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS).

[3]  J. W. Kolar,et al.  Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems , 2012, IEEE Transactions on Power Electronics.

[4]  Alex Van den Bossche,et al.  Inductors and Transformers for Power Electronics , 2005 .

[5]  Gregory F. Reed,et al.  Power Electronics for Grid-Scale Energy Storage , 2014, Proceedings of the IEEE.

[6]  Charles R. Sullivan.  Optimal choice for number of strands in a litz-wire transformer winding , 1997 .

[7]  J. Biela,et al.  Core Losses Under the DC Bias Condition Based on Steinmetz Parameters , 2012, IEEE Transactions on Power Electronics.

[8]  Pablo Sanchis,et al.  Analytical Design Methodology for Litz-Wired High-Frequency Power Transformers , 2015, IEEE Transactions on Industrial Electronics.

[9]  Johann W. Kolar,et al.  Comparative Evaluation of Three-Phase AC–AC Matrix Converter and Voltage DC-Link Back-to-Back Converter Systems , 2012, IEEE Transactions on Industrial Electronics.

[10]  Nicola Femia,et al.  Transformer Design for Isolated Switching Converters Based on Geometric Form Factors of Magnetic Cores , 2013, IEEE Transactions on Industrial Electronics.

[11]  J. W. Kolar,et al.  Loss modeling of inductive components employed in power electronic systems , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[12]  M. Glover,et al.  Wide Bandgap Technologies and Their Implications on Miniaturizing Power Electronic Systems , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[13]  Bimal K. Bose,et al.  Global Energy Scenario and Impact of Power Electronics in 21st Century , 2013, IEEE Transactions on Industrial Electronics.

[14]  D. Casadei,et al.  Comparison between an AC-DC matrix converter and an interleaved DC-dc converter with power factor corrector for plug-in electric vehicles , 2014, 2014 IEEE International Electric Vehicle Conference (IEVC).

[15]  Subhashish Bhattacharya,et al.  Design considerations of high voltage and high frequency three phase transformer for Solid State Transformer application , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[16]  Andreas Lindemann,et al.  Leakage Inductance Determination for Transformers with Interleaving of Windings , 2010 .

[17]  H. Akagi,et al.  Power-Loss Breakdown of a 750-V 100-kW 20-kHz Bidirectional Isolated DC–DC Converter Using SiC-MOSFET/SBD Dual Modules , 2015, IEEE Transactions on Industry Applications.

[18]  Jianjiang Shi,et al.  Design of High Voltage, High Power and High Frequency Transformer in LCC Resonant Converter , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[19]  Diogo Varajao,et al.  Towards a new technological solution for community energy storage , 2014, 2014 16th European Conference on Power Electronics and Applications.

[20]  Johann W. Kolar,et al.  Optimal Design of Inductive Components Based on Accurate Loss and Thermal Models , 2012 .

[21]  P. T. Krein,et al.  Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles , 2013, IEEE Transactions on Power Electronics.

[22]  José R. Rodríguez,et al.  Matrix converters: a technology review , 2002, IEEE Trans. Ind. Electron..

[23]  Charles R. Sullivan,et al.  Simplified design method for litz wire , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[24]  J.W. Kolar,et al.  A compact, high voltage 25 kW, 50 kHz DC-DC converter based on SiC JFETs , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[25]  Hui Li,et al.  High-Frequency Transformer Isolated Bidirectional DC–DC Converter Modules With High Efficiency Over Wide Load Range for 20 kVA Solid-State Transformer , 2011, IEEE Transactions on Power Electronics.

[26]  Chas.P. Steinmetz,et al.  On the law of hysteresis , 1984, Proceedings of the IEEE.

[27]  Alfred Rufer,et al.  A Modular Multiport Power Electronic Transformer With Integrated Split Battery Energy Storage for Versatile Ultrafast EV Charging Stations , 2015, IEEE Transactions on Industrial Electronics.

[28]  Donald W. Novotny,et al.  Design considerations for high-frequency coaxial winding power transformers , 1993 .

[29]  J. Muhlethaler,et al.  Modeling and multi-objective optimization of inductive power components , 2012 .

[30]  Johann W. Kolar,et al.  Review of Three-Phase PWM AC–AC Converter Topologies , 2011, IEEE Transactions on Industrial Electronics.

[31]  S. Norrga,et al.  Design considerations for a medium frequency transformer in a line side power conversion system , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[32]  Akshay Kumar Rathore,et al.  Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges , 2015, IEEE Transactions on Industrial Electronics.