Air-side particulate fouling of microchannel heat exchangers: Experimental comparison of air-side pressure drop and heat transfer with plate-fin heat exchanger

Abstract In this study, the air-side pressure drop and heat transfer performance of plate-fin and microchannel coils were tested under clean and fouled conditions. The heat exchangers were tested with two different types of dust, ASHRAE Standard Dust and Arizona Road Test Dust. The ASHRAE Standard Dust was found to have a very significant impact on the pressure drop of the microchannel heat exchanger, increasing the air-side pressure drop of the microchannel heat exchanger over 200% for a dust injection of 267 g (1612.5 g/m 2 ). Fouling of the microchannel heat exchanger with Arizona Road Test Dust was not found to increase the air-side pressure drop of the microchannel heat exchanger but was found to decrease the heat transfer rate by more than 10%. In addition, from studies of the evolution of the air-side pressure drop during the fouling process, it is seen that microchannel coils with louvered fins and fin pitches below 2.0 mm were significantly more prone to fouling than louvered heat exchangers with larger fin pitches. The wavy-plate-fin heat exchanger was significantly less sensitive to fouling with both types of dust. Furthermore, detailed macro photographs were obtained under all conditions tested to more fully characterize the particulate deposition.

[1]  Young-Chull Ahn,et al.  An experimental study of the air-side particulate fouling in fin-and-tube heat exchangers of air conditioners , 2003 .

[2]  James E. Braun,et al.  The impact of fouling on the performance of filter–evaporator combinations , 2007 .

[3]  Eckhard A. Groll,et al.  Experimental Analysis of the Effects of Particulate Fouling on Heat Exchanger Heat Transfer and Air-Side Pressure Drop for a Hybrid Dry Cooler , 2011 .

[4]  M. Heikal,et al.  Air side fouling of compact heat exchangers , 2006 .

[5]  R. Haghighi-Khoshkhoo,et al.  Air-Side Fouling of Compact Heat Exchangers for Discrete Particle Size Ranges , 2007 .

[6]  Pertti Sarkomaa,et al.  The effect of air side fouling on thermal‐hydraulic characteristics of a compact heat exchanger , 2003 .

[7]  William W. Nazaroff,et al.  Predicting particle deposition on HVAC heat exchangers , 2003 .

[8]  James E. Braun,et al.  The impact of evaporator fouling and filtration on the performance of packaged air conditioners , 2007 .

[9]  James E. Braun,et al.  Common faults and their impacts for rooftop air conditioners , 1998 .

[10]  Reducing Particle Deposition in Air-Cooled Heat Exchangers , 1992 .

[11]  J E Braun,et al.  Impact of fouling and cleaning on plate fin and spine fin heat exchanger performance. , 2005 .

[12]  B. C. Krafthefer,et al.  Energy use implications of methods to maintain heat exchanger coil cleanliness , 1986 .

[13]  Evangelos Tsotsas,et al.  Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams , 2002 .