A micro-sized Si–CNT anode for practical application via a one-step, low-cost and green method

Silicon (Si) has been used in Li-ion batteries (LIBs), and considerable progress has been achieved in design and engineering with improved capacity and cycling. However, large-scale application of Si-based anodes is hindered owing to the wide use of toxic raw materials, high manufacturing cost, limited capacity and unpalatable tap density. Herein, we describe a low-cost and green route to solve these problems. Composite Si–carbon nanotube (CNT) spheres were synthesized using a scalable method: rotary spray drying. These spheres were interspersed by many CNTs and wrapped Si nanoparticles (SiNPs) within them. Due to slightly rigid structure of CNTs, many void spaces in spheres could be preserved during the agglomeration of spheres. These voids could accommodate the volume expansion of Si particles and promote a stable integral structure during cycling. Importantly, this micron-grade material could improve the volume density and tap density to achieve high energy density. The prepared material showed promising reversible capacity of 2500 mA h g−1 with retention of 98% during 500 cycles. Ultra-fast discharge–charge (900 mA h g−1 at 20C) was achieved owing to the crosslinking effect between CNTs and SiNPs in these spheres. Moreover, a high-performance Si material was actualized via a simple industrial method rather than a complex synthesis.

[1]  Qiang Ru,et al.  Mass-producible method for preparation of a carbon-coated graphite@plasma nano-silicon@carbon composite with enhanced performance as lithium ion battery anode , 2017 .

[2]  Feiying Jin,et al.  Efficient Activation of High-Loading Sulfur by Small CNTs Confined Inside a Large CNT for High-Capacity and High-Rate Lithium-Sulfur Batteries. , 2016, Nano letters.

[3]  Qianran He,et al.  Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter. , 2016, Nanoscale.

[4]  Zongping Shao,et al.  High yield and low-cost ball milling synthesis of nano-flake Si@SiO2 with small crystalline grains and abundant grain boundaries as a superior anode for Li-ion batteries , 2015 .

[5]  M Stanley Whittingham,et al.  Ultimate limits to intercalation reactions for lithium batteries. , 2014, Chemical reviews.

[6]  Jaephil Cho,et al.  Superior long-term energy retention and volumetric energy density for Li-rich cathode materials. , 2014, Nano letters.

[7]  Wei Fu,et al.  Surface Binding of Polypyrrole on Porous Silicon Hollow Nanospheres for Li‐Ion Battery Anodes with High Structure Stability , 2014, Advanced materials.

[8]  P. Moreau,et al.  Critical Role of Silicon Nanoparticles Surface on Lithium Cell Electrochemical Performance Analyzed by FTIR, Raman, EELS, XPS, NMR, and BDS Spectroscopies , 2014 .

[9]  Stefano Passerini,et al.  ZnFe2O4-C/LiFePO4-CNT: A Novel High-Power Lithium-Ion Battery with Excellent Cycling Performance , 2014, Advanced energy materials.

[10]  Zongping Shao,et al.  Facile spray-drying/pyrolysis synthesis of core–shell structure graphite/silicon-porous carbon composite as a superior anode for Li-ion batteries , 2014 .

[11]  V. Battaglia,et al.  In situ formed Si nanoparticle network with micron-sized Si particles for lithium-ion battery anodes. , 2013, Nano letters.

[12]  Yu‐Guo Guo,et al.  Carbon‐Nanotube‐Decorated Nano‐LiFePO4 @C Cathode Material with Superior High‐Rate and Low‐Temperature Performances for Lithium‐Ion Batteries , 2013 .

[13]  Yi Cui,et al.  25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion Batteries , 2013, Advanced materials.

[14]  Christian Masquelier,et al.  Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries. , 2013, Chemical reviews.

[15]  Jiaqi Huang,et al.  The road for nanomaterials industry: a review of carbon nanotube production, post-treatment, and bulk applications for composites and energy storage. , 2013, Small.

[16]  Chia‐Chen Li,et al.  Importance of binder compositions to the dispersion and electrochemical properties of water-based LiCoO2 cathodes , 2013 .

[17]  Hui Wu,et al.  Designing nanostructured Si anodes for high energy lithium ion batteries , 2012 .

[18]  Hui Wu,et al.  A yolk-shell design for stabilized and scalable li-ion battery alloy anodes. , 2012, Nano letters.

[19]  Moon Jeong Park,et al.  Binder-free Ge nanoparticles-carbon hybrids for anode materials of advanced lithium batteries with high capacity and rate capability. , 2012, Chemical communications.

[20]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[21]  Jian Yu Huang,et al.  Size-dependent fracture of silicon nanoparticles during lithiation. , 2011, ACS nano.

[22]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[23]  Y. Chiang.  Building a Better Battery , 2010, Science.

[24]  J. Cabana,et al.  Beyond Intercalation‐Based Li‐Ion Batteries: The State of the Art and Challenges of Electrode Materials Reacting Through Conversion Reactions , 2010, Advanced materials.

[25]  G. Yushin,et al.  Deformations in Si-Li anodes upon electrochemical alloying in nano-confined space. , 2010, Journal of the American Chemical Society.

[26]  Anton Van der Ven,et al.  Lithium Diffusion in Graphitic Carbon , 2010, 1108.0576.

[27]  J. Goodenough,et al.  Challenges for Rechargeable Li Batteries , 2010 .

[28]  Joachim Maier,et al.  Lithium Storage in Carbon Nanostructures , 2009, Advanced materials.

[29]  Meiye Li,et al.  Syntheses of Opened Hollow Clay Microspheres through a Spray-Drying Approach and Their Derivative Clay/Carbon Nanotubes Composites , 2008 .

[30]  D. Wexler,et al.  Amorphous Carbon-Coated Silicon Nanocomposites: A Low-Temperature Synthesis via Spray Pyrolysis and Their Application as High-Capacity Anodes for Lithium-Ion Batteries , 2007 .

[31]  F. Iskandar,et al.  Enhanced Photocatalytic Performance of Brookite TiO2 Macroporous Particles Prepared by Spray Drying with Colloidal Templating , 2007 .

[32]  Ye Cai,et al.  Chemical reduction of three-dimensional silica micro-assemblies into microporous silicon replicas , 2007, Nature.

[33]  P. Kumta,et al.  Silicon, graphite and resin based hard carbon nanocomposite anodes for lithium ion batteries , 2007 .

[34]  David Wexler,et al.  Highly reversible lithium storage in spheroidal carbon-coated silicon nanocomposites as anodes for lithium-ion batteries. , 2006, Angewandte Chemie.

[35]  P. Kumta,et al.  Silicon and carbon based composite anodes for lithium ion batteries , 2006 .

[36]  Chun-hua Chen,et al.  Electrochemical Characterizations of Commercial LiCoO2 Powders with Surface Modified by Li3PO4 Nanoparticles , 2006 .

[37]  Mo-hua Yang,et al.  Electrochemical Characterizations on Si and C-Coated Si Particle Electrodes for Lithium-Ion Batteries , 2005 .

[38]  Yung-Eun Sung,et al.  Failure Modes of Silicon Powder Negative Electrode in Lithium Secondary Batteries , 2004 .

[39]  Christopher Roland,et al.  Ab initio investigations of lithium diffusion in carbon nanotube systems. , 2002, Physical review letters.

[40]  P. McEuen,et al.  Single-Electron Transport in Ropes of Carbon Nanotubes , 1996, Science.

[41]  H. Damme,et al.  Hydroxyls of silica powders , 1990 .

[42]  X. Sun,et al.  Understanding and recent development of carbon coating on LiFePO4 cathode materials for lithium-ion batteries , 2012 .

[43]  Song Jin,et al.  Nanostructured silicon for high capacity lithium battery anodes , 2011 .

[44]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[45]  Chunsheng Wang,et al.  Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells , 2007 .

[46]  Xuejie Huang,et al.  Cage-like carbon nanotubes/Si composite as anode material for lithium ion batteries , 2006 .