Optimizing decolorization of Methylene Blue and Methyl Orange dye by pulsed discharged plasma in water using response surface methodology

[1]  Masayuki Sato,et al.  Oxidative decoloration of dyes by pulsed discharge plasma in water , 2003 .

[2]  Sangyong Kim,et al.  Comparison of disperse and reactive dye removals by chemical coagulation and Fenton oxidation. , 2004, Journal of hazardous materials.

[3]  J. J. Porter,et al.  Modelling adsorption of acid orange 7 dye in aqueous solutions to spent brewery grains , 2004 .

[4]  Ming-hua Zhou,et al.  Synergistic effects of liquid and gas phase discharges using pulsed high voltage for dyes degradation in the presence of oxygen. , 2005, Chemosphere.

[5]  N. Modirshahla,et al.  Photooxidative degradation of Malachite Green (MG) by UV/H2O2: Influence of operational parameters and kinetic modeling , 2006 .

[6]  Bahadir K Körbahti.  Response surface optimization of electrochemical treatment of textile dye wastewater. , 2007, Journal of hazardous materials.

[7]  Masayuki Sato,et al.  Degradation of phenol in water using a gas–liquid phase pulsed discharge plasma reactor , 2007 .

[8]  M. P. Callao,et al.  Kinetic and adsorption study of acid dye removal using activated carbon. , 2007, Chemosphere.

[9]  I. Poulios,et al.  Sonolytic, photocatalytic and sonophotocatalytic degradation of malachite green in aqueous solutions , 2007 .

[10]  E. Demirbas,et al.  Adsorption of reactive dyes from aqueous solutions by fly ash: kinetic and equilibrium studies. , 2008, Journal of hazardous materials.

[11]  Xingwang Zhang,et al.  Using a novel pulsed high-voltage gas–liquid hybrid discharge continuous reactor for removal of organic pollutant in oxygen atmosphere , 2008 .

[12]  C. Du,et al.  Decolorization of Acid Orange 7 solution by gas-liquid gliding arc discharge plasma. , 2008, Journal of hazardous materials.

[13]  A. Tanyolaç,et al.  Electrochemical treatment of simulated textile wastewater with industrial components and Levafix Blue CA reactive dye: optimization through response surface methodology. , 2008, Journal of hazardous materials.

[14]  M. Bezerra,et al.  Response surface methodology (RSM) as a tool for optimization in analytical chemistry. , 2008, Talanta.

[15]  T. Kojima,et al.  Arsenic removal through electrocoagulation: Kinetic and statistical modeling , 2009 .

[16]  Arvind Kumar,et al.  Optimization of an azo dye batch adsorption parameters using Box-Behnken design. , 2009 .

[17]  Li-Min Zhu,et al.  Optimization of adsorption conditions of papain on dye affinity membrane using response surface methodology. , 2009, Bioresource technology.

[18]  P. Cañizares,et al.  Oxidation of enrofloxacin with conductive-diamond electrochemical oxidation, ozonation and Fenton oxidation: a comparison. , 2009, Water research.

[19]  J. Boodts,et al.  Application of electrochemically generated ozone to the discoloration and degradation of solutions containing the dye Reactive Orange 122. , 2009, Journal of hazardous materials.

[20]  Huaili Zheng,et al.  Optimization for decolorization of azo dye acid green 20 by ultrasound and H2O2 using response surface methodology. , 2009, Journal of hazardous materials.

[21]  Habibollah Younesi,et al.  Biosorption of nickel(II) from aqueous solution by Aspergillus niger: response surface methodology and isotherm study. , 2009, Chemosphere.

[22]  Tuğba Ölmez,et al.  The optimization of Cr(VI) reduction and removal by electrocoagulation using response surface methodology. , 2009 .

[23]  P. A. Soloman,et al.  Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pre-treatment and optimization by RSM , 2009 .

[24]  Divya Bhatia,et al.  Biosorption optimization of lead(II), cadmium(II) and copper(II) using response surface methodology and applicability in isotherms and thermodynamics modeling. , 2010, Journal of hazardous materials.

[25]  H. Bhatti,et al.  Response surface methodology and central composite design analysis of biosorption of reactive anthraquinone dyes by Citrus sinensis waste biomass. , 2010 .

[26]  B. Kayan,et al.  Degradation of acid red 97 dye in aqueous medium using wet oxidation and electro-Fenton techniques. , 2010, Journal of hazardous materials.

[27]  M Arami,et al.  Coagulation/flocculation process for dye removal using sludge from water treatment plant: optimization through response surface methodology. , 2010, Journal of hazardous materials.

[28]  Lizhi Zhang,et al.  Rapid decolorization of azo dyes in aqueous solution by an ultrasound-assisted electrocatalytic oxidation process. , 2010, Ultrasonics sonochemistry.

[29]  Victor David,et al.  Degradation of pharmaceutical compound pentoxifylline in water by non-thermal plasma treatment. , 2010, Water research.

[30]  B. Gao,et al.  Adsorption characteristics of dyes in columns of activated carbon prepared from paper mill sewage sludge , 2011 .

[31]  Niyaz Mohammad Mahmoodi,et al.  Binary system dye removal from colored textile wastewater using activated carbon: Kinetic and isotherm studies , 2011 .

[32]  Rui-Shen Meng,et al.  Investigation of ultrasound assisted regeneration of Ni–bentonite with response surface methodology (RSM) , 2011 .

[33]  Mitali Sarkar,et al.  Application of response surface methodology for optimization of heavy metal biosorption using surfactant modified chitosan bead , 2011 .

[34]  M. Kostić,et al.  Decolorization of reactive textile dyes using water falling film dielectric barrier discharge. , 2011, Journal of hazardous materials.

[35]  K. Kadirvelu,et al.  Investigation of Cr(VI) adsorption onto chemically treated Helianthus annuus: optimization using response surface methodology. , 2011, Bioresource technology.

[36]  A. Fabregat,et al.  Comparison of electrocoagulation using iron and aluminium electrodes with chemical coagulation for the removal of a highly soluble acid dye , 2011 .

[37]  Vitor C. Almeida,et al.  Ternary adsorption of acid dyes onto activated carbon from flamboyant pods (Delonix regia): Analysis by derivative spectrophotometry and response surface methodology , 2012 .

[38]  A. Bhatnagar,et al.  Adsorption of acid orange II dye by raw and chemically modified brown macroalga Stoechospermum marginatum , 2012 .

[39]  Han Yan,et al.  Adsorption of anionic dyes from aqueous solutions using chemically modified straw. , 2012, Bioresource technology.

[40]  N. Ren,et al.  A rapid and low energy consumption method to decolorize the high concentration triphenylmethane dye wastewater: operational parameters optimization for the ultrasonic-assisted ozone oxidation process. , 2012, Bioresource technology.

[41]  Atul Kumar,et al.  Application of Response Surface Methodology for Methylene Blue dye removal from aqueous solution using low cost adsorbent , 2012 .

[42]  W. Daud,et al.  The application of response surface methodology to optimize the amination of activated carbon for the preparation of carbon dioxide adsorbents , 2012 .

[43]  Yunhai Wu,et al.  Optimizing Adsorption of Co(II) and Ni(II) by 13× Molecular Sieves Using Response Surface Methodology , 2012, Water, Air, & Soil Pollution.

[44]  Wenjuan Bian,et al.  Actions of nitrogen plasma in the 4-chrolophenol degradation by pulsed high-voltage discharge with bubbling gas , 2013 .