Practical Applications of Taguchi Method for Optimization of Processing Parameters for Plastic Injection Moulding: A Retrospective Review
暂无分享,去创建一个
[1] Shad Dowlatshahi. An application of design of experiments for optimization of plastic injection molding processes , 2004 .
[2] Mirigul Altan,et al. Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods , 2010 .
[3] Hasan Kurtaran,et al. Warpage optimization of a bus ceiling lamp base using neural network model and genetic algorithm , 2005 .
[4] Cheng-Hung Huang,et al. The Study on the Optimization of Injection Molding Process Parameters with Gray Relational Analysis , 2003 .
[5] Omer Eyercioglu,et al. Development of an expert system for the determination of injection moulding parameters of thermoplastic materials: EX-PIMM , 2002 .
[6] Ko-Ta Chiang,et al. The optimal process conditions of an injection-molded thermoplastic part with a thin shell feature using grey-fuzzy logic: A case study on machining the PC/ABS cell phone shell , 2007 .
[7] Kim Seng Lee,et al. Mould data management in plastic injection mould industries , 2008 .
[8] Saurav Datta,et al. Grey-based taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding , 2008 .
[9] Mohd Sapuan Salit,et al. An optimise drilling process for an aircraft composite structure using design of experiments , 2009 .
[10] Anthony L Andrady,et al. Applications and societal benefits of plastics , 2009, Philosophical Transactions of the Royal Society B: Biological Sciences.
[11] J. Shie. Optimization of injection‐molding process for mechanical properties of polypropylene components via a generalized regression neural network , 2008 .
[12] Babur Ozcelik,et al. Comparison of the warpage optimization in the plastic injection molding using ANOVA, neural network model and genetic algorithm , 2006 .
[13] D. Cardozo,et al. Three Models of the 3D Filling Simulation for Injection Molding: A Brief Review , 2008 .
[14] Wen-Chin Chen,et al. Process parameter optimization for MIMO plastic injection molding via soft computing , 2009, Expert Syst. Appl..
[15] Jianhong Zhao,et al. Effects of process parameters on the micro molding process , 2003 .
[16] Zahid A. Khan,et al. Application of Taguchi Method in the Optimization of Injection Moulding Parameters for Manufacturing Products from Plastic Blend , 2010 .
[17] Amr Arisha,et al. Practical simulation application: Evaluation of process control parameters in Twisted-Pair Cables manufacturing system , 2010, Simul. Model. Pract. Theory.
[18] Douglas M. Bryce. Plastic injection molding , 1996 .
[19] L. S. Tsou,et al. Optimal process conditions of shrinkage and warpage of thin‐wall parts , 2004 .
[20] Hung‐Chang Liao,et al. Optimizing multi‐response problem in the Taguchi method by DEA based ranking method , 2002 .
[21] Chung-Feng Jeffrey Kuo,et al. Optimization of Injection Molding Processing Parameters for LCD Light-Guide Plates , 2007 .
[22] Babur Ozcelik,et al. Influence of injection parameters and mold materials on mechanical properties of ABS in plastic injection molding , 2010 .
[23] Y. L. Loh,et al. A Two-Stage Approach for Optimizing Simulation Experiments , 1993 .
[24] Kunal Chakraborty,et al. Bioeconomic modelling of a prey predator system using differential algebraic equations , 2010 .
[25] C. Fung. Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis , 2003 .
[26] Fanhuai Shi,et al. Optimisation of Plastic Injection Moulding Process with Soft Computing , 2003 .
[27] Bernhard Plattner,et al. NWC: Node Weight Computation in MANETs , 2007, 2007 16th International Conference on Computer Communications and Networks.
[28] K. Chiang,et al. Application of grey-fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature , 2006 .
[29] Mancang Song,et al. Research on effects of injection process parameters on the molding process for ultra-thin wall plastic parts , 2007 .
[30] Hee-Jin Shim,et al. Cause of failure and optimization of a V-belt pulley considering fatigue life uncertainty in automotive applications , 2009 .
[31] J. Deng,et al. Introduction to Grey system theory , 1989 .
[32] C. Fung,et al. Multi-response optimization in friction properties of PBT composites using Taguchi method and principle component analysis , 2005 .
[33] S. Kamaruddin,et al. Investigating the Effects of Injection Molding Parameters on the Mechanical Properties of Recycled Plastic Parts Using the Taguchi Method , 2011 .
[34] Arshad Noor Siddiquee,et al. Feasibility study of use of recycled High Density Polyethylene and multi response optimization of injection moulding parameters using combined grey relational and principal component analyses , 2010 .
[35] Multiple Quality Characteristics Optimization of Precision Injection Molding for LCD Light Guide Plates , 2007 .
[36] Ming-Chih Huang,et al. The effective factors in the warpage problem of an injection-molded part with a thin shell feature , 2001 .
[37] Babur Ozcelik,et al. Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method , 2006 .
[38] Cheng-Hsien Wu,et al. Effects of geometry and injection‐molding parameters on weld‐line strength , 2005 .
[39] Hari Singh,et al. Optimizing cutting force for turned parts by Taguchi's parameter design approach , 2005 .
[40] Babur Ozcelik,et al. Warpage and structural analysis of thin shell plastic in the plastic injection molding , 2009 .
[41] Yung-Kuang Yang,et al. Optimization of Injection-Molding Process for Mechanical and Tribological Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites with Grey Relational Analysis: A Case Study , 2006 .
[42] Shih-Jung Liu,et al. Minimizing the sinkmarks in injection‐molded thermoplastics , 2001 .
[43] Tao-Chih Chang,et al. Shrinkage behavior and optimization of injection molded parts studied by the taguchi method , 2001 .
[44] Bryan F. J. Manly,et al. Multivariate Statistical Methods : A Primer , 1986 .
[45] Huei-Huang Lee,et al. Application of Taguchi's method on the optimal process design of an injection molded PC/PBT automobile bumper , 1997 .
[46] Hongsheng Li,et al. Reducing the effects of weldlines on appearance of plastic products by Taguchi experimental method , 2007 .
[47] C. Kwong,et al. Review of research in the determination of process parameters for plastic injection molding , 1999 .
[48] Ji-Liang Doong,et al. Optimization of the injection molding process of short glass fiber reinforced polycarbonate composites using grey relational analysis , 2000 .
[49] Min-Chie Chiu,et al. An Approach to Rib Design of Injection Molded Product Using Finite Element and Taguchi Method , 2008 .
[50] Yung Kang Shen,et al. Comparison of the results for semisolid and plastic injection molding process , 2002 .
[51] Kuo-Ming Tsai,et al. A study of the effects of process parameters for injection molding on surface quality of optical lenses , 2009 .
[52] Kang Tai,et al. An evolutionary approach for cooling system optimization in plastic injection moulding , 2004 .
[53] S. M. Kulkarni,et al. Influence of process parameters on cutting force and torque during drilling of glass–fiber polyester reinforced composites , 2005 .
[54] Keun Park,et al. Design of experiment considering two-way interactions and its application to injection molding processes with numerical analysis , 2004 .
[55] Shih-Jung Liu,et al. Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites , 2000 .
[56] Phil J Hobbs,et al. The Taguchi methodology as a statistical tool for biotechnological applications: A critical appraisal , 2008, Biotechnology journal.
[57] D Mathivanan,et al. Minimization of sink mark defects in injection molding process - Taguchi approach , 2010 .
[58] Y. Shen,et al. Optimization of the Micro-Injection Molding Process using Grey Relational Analysis and MoldFlow Analysis , 2004 .
[59] Changyu Shen,et al. Investigation of the Effect of Molding Variables on Sink Marks of Plastic Injection Molded Parts Using Taguchi DOE Technique , 2007 .