Detection of Volatile Organic Compounds Using Surface Acoustic Wave Sensor Based on Nanoparticles Incorporated in Polymer

In this work, surface acoustic wave (SAW) sensors with two types of polymer sensing films, polyethyleneimine (PEI) and polydimethylsiloxane (PDMS), containing embedded ZnO, TiO2, and WO3 nanoparticles (NPs) for detecting volatile organic compounds (VOCs) were produced and studied. The NPs were obtained using the pulsed laser ablation method, with the same deposition conditions used for all three materials studied. After incorporation of the NPs into the polymer, the suspension obtained was deposited using the airbrush method onto the quartz substrate of the sensor. Sensors were tested for four types of VOCs: Ethanol, toluene, acetone, and dichloroethane. Those based on PEI-sensitive films showed a superior sensitivity to those with PDMS. It was also found that the sensors with WO3 NPs had the best results for ethanol, acetone, and dichloroethane. The limit of detection (LOD) of the PEI/WO3 sensor was 6 ppm for ethanol, 15 ppm for acetone, and 9 ppm for dichloroethane. For toluene, the best response was obtained using the PEI/ZnO sensor, which produced a LOD of 9 ppm.

[1]  V. Mathe,et al.  Structural, optical and gas sensing properties of spin coated nanocrystalline zinc oxide thin films , 2013, Journal of Materials Science: Materials in Electronics.

[2]  David S. Ballantine,et al.  Acoustic wave sensors : theory, design, and physico-chemical applications , 1997 .

[3]  Giovanni Neri,et al.  Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: A review , 2016 .

[4]  Aurelian Marcu,et al.  Surface Acoustic Wave Sensors for Hydrogen and Deuterium Detection , 2017, Sensors.

[5]  Cristian Viespe Surface Acoustic Wave Sensors Based on Nanoporous Films for Hydrogen Detection , 2014 .

[6]  A. Morrin,et al.  Endogenous and microbial volatile organic compounds in cutaneous health and disease , 2019, TrAC Trends in Analytical Chemistry.

[7]  Tania Martellini,et al.  Indoor Air Quality and Health , 2017, International journal of environmental research and public health.

[8]  G. Coppola,et al.  PDMS membranes as sensing element in optical sensors for gas detection in water , 2017 .

[9]  Cristian Viespe,et al.  Surface Acoustic Wave Sensor with Pd/ZnO Bilayer Structure for Room Temperature Hydrogen Detection , 2017, Sensors.

[10]  R. Sarmago,et al.  Synthesis of Iron Oxide Nanostructures via Carbothermal Reaction of Fe Microspheres Generated by Infrared Pulsed Laser Ablation , 2019, Coatings.

[11]  P. Ning,et al.  Influence of volatile organic compounds (VOCs) on pulmonary surfactant monolayers at air-water interface: Implication for the pulmonary health , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[12]  Constantin Grigoriu,et al.  Surface acoustic wave sensors with carbon nanotubes and SiO2/Si nanoparticles based nanocomposites for VOC detection , 2010 .

[13]  David W. Greve,et al.  SAW Sensors for Chemical Vapors and Gases , 2017, Sensors.

[14]  Weimin Du,et al.  Synthesis and excellent acetone sensing properties of porous WO3 nanofibers , 2016 .

[15]  Y. Sadaoka,et al.  Detection of VOC in air with a planar-type potentiometric gas sensor based on YSZ with a Pt electrode modified with TiO2 , 2017 .

[16]  Wei Guo,et al.  Temperature and acidity effects on WO3 nanostructures and gas- sensing properties of WO3 nanoplates , 2014 .

[17]  T. Lippert,et al.  Highly selective surface acoustic wave e-nose implemented by laser direct writing , 2019, Sensors and Actuators B: Chemical.

[18]  Shinya Sasaki Surface Acoustic Wave , 2018 .

[19]  Jacek Gębicki,et al.  Currently Commercially Available Chemical Sensors Employed for Detection of Volatile Organic Compounds in Outdoor and Indoor Air , 2017 .

[20]  Myungjoon Kim,et al.  Synthesis of Nanoparticles by Laser Ablation: A Review , 2017 .

[21]  S. Zeinali,et al.  Comparative investigation of interdigitated and parallel-plate capacitive gas sensors based on Cu-BTC nanoparticles for selective detection of polar and apolar VOCs indoors , 2019, Sensors and Actuators B: Chemical.

[22]  Seon-Jin Choi,et al.  The stability, sensitivity and response transients of ZnO, SnO2 and WO3 sensors under acetone, toluene and H2S environments , 2014 .

[23]  Ye Chang,et al.  Detection of Volatile Organic Compounds by Self-assembled Monolayer Coated Sensor Array with Concentration-independent Fingerprints , 2016, Scientific Reports.

[24]  Cristian Viespe,et al.  Characteristics of Surface Acoustic Wave Sensors with Nanoparticles Embedded in Polymer Sensitive Layers for VOC Detection , 2018, Sensors.

[25]  Yadong Jiang,et al.  Enhanced Acetone-Sensing Properties of PEI Thin Film by GO-NH2 Functional Groups Modification at Room Temperature , 2019, Front. Mater..

[26]  Ying Dong,et al.  A Room Temperature VOCs Gas Sensor Based on a Layer by Layer Multi-Walled Carbon Nanotubes/Poly-ethylene Glycol Composite , 2018, Sensors.