Compression performances of composite aluminum foam tubes

[1]  Xueling Fan,et al.  Dynamic Response of Sandwich Tubes with Continuously Density-Graded Aluminum Foam Cores under Internal Explosion Load , 2022, Materials.

[2]  X. Zhai,et al.  Buckling behaviors of aluminum foam-filled aluminum alloy composite columns under axial compression , 2022, Thin-Walled Structures.

[3]  C. Lim,et al.  Numerical Simulation and Experimental Study on Energy Absorption of Foam-Filled Local Nanocrystallized Thin-Walled Tubes under Axial Crushing , 2022, Materials.

[4]  F. Yu,et al.  Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing , 2022, Composite Structures.

[5]  I. Orbulov,et al.  The influence of infiltration casting technique on properties of metal syntactic foams and their foam-filled tube structures , 2022, Materials Science and Engineering: A.

[6]  Fuxin Yin,et al.  Energy absorption and deformation behavior of multilayer aluminum foam structures , 2022, Materials Science and Engineering: A.

[7]  Yongchang Liu,et al.  Compression Performances of Integral-Forming Aluminum Foam Sandwich , 2021, Composite Structures.

[8]  Xiaogang Guo,et al.  Low-velocity impact performance of composite-aluminum tubes prepared by mesoscopic hybridization , 2021 .

[9]  Zhenkuan Pan,et al.  Energy Absorption Characteristics of a CFRP-Al Hybrid Thin-Walled Circular Tube under Axial Crushing , 2021, Aerospace.

[10]  Wei Wang,et al.  Bending behavior of cenosphere aluminum matrix syntactic foam-filled circular tubes , 2021 .

[11]  F. Jin,et al.  Design of a novel multi-walled tube-reinforced aluminum foam for energy absorption , 2021 .

[12]  M. Ferdynus,et al.  The Influence of Different Length Aluminum Foam Filling on Mechanical Behavior of a Square Thin-Walled Column , 2021, Materials.

[13]  Haiyang Yang,et al.  Crashworthiness of circular fiber reinforced plastic tubes filled with composite skeletons/aluminum foam under drop-weight impact loading , 2021 .

[14]  E. Maire,et al.  Microstructural damage behaviour of Al foams , 2021 .

[15]  Yonghui Wang,et al.  Energy absorption performance of a new circular–triangular nested tube and its application as sacrificial cladding , 2020 .

[16]  S. Li,et al.  Crushing analysis and design optimization for foam-filled aluminum/CFRP hybrid tube against transverse impact , 2020 .

[17]  E. Maire,et al.  Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography , 2020, Advanced Engineering Materials.

[18]  Qing Li,et al.  Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures , 2019, Composite Structures.

[19]  Xu Zhou,et al.  Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities , 2018, Journal of Materials Engineering and Performance.

[20]  A. Ma,et al.  Fabrication of Al foam without thickening process through melt-foaming method , 2018 .

[21]  L. Krstulović-Opara,et al.  Axial crush behaviour of the aluminium alloy in-situ foam filled tubes with very low wall thickness , 2018 .

[22]  Xin Liu,et al.  Compressive Deformation Behavior of Closed-Cell Micro-Pore Magnesium Composite Foam , 2018, Materials.

[23]  Xiaodong Huang,et al.  Topological configuration analysis and design for foam filled multi-cell tubes , 2018 .

[24]  L. Marșavina,et al.  The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes , 2017 .

[25]  Siyi Yang,et al.  Characterization of metal grid-structure reinforced aluminum foam under quasi-static bending loads , 2017 .

[26]  Abdul-Ghani Olabi,et al.  On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments , 2017 .

[27]  Jilin Yu,et al.  Crashworthiness of graded cellular materials: A design strategy based on a nonlinear plastic shock model , 2017 .

[28]  Zi-qian Zhang,et al.  Prediction of Maximum Section Flattening of Thin-walled Circular Steel Tube in Continuous Rotary Straightening Process , 2016 .

[29]  Tao Tang,et al.  Crushing analysis of thin-walled beams with various section geometries under lateral impact , 2016 .

[30]  Jianguang Fang,et al.  Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness , 2015 .

[31]  L. Krstulović-Opara,et al.  Static and dynamic axial crush performance of in-situ foam-filled tubes , 2015 .

[32]  G. Liaghat,et al.  Absorbed energy by foam-filled quadrangle tubes during the crushing process by considering the interaction effects , 2015 .

[33]  L. Krstulović-Opara,et al.  Variation of quasi-static and dynamic compressive properties in a single aluminium foam block , 2014 .

[34]  Qing Li,et al.  Crushing analysis of foam-filled single and bitubal polygonal thin-walled tubes , 2014 .

[35]  N. Yoshikawa,et al.  Fabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties , 2014, Materials.

[36]  Damien Guillon,et al.  Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes , 2014 .

[37]  Matej Vesenjak,et al.  Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foam , 2014 .

[38]  John Banhart,et al.  Light‐Metal Foams—History of Innovation and Technological Challenges , 2013 .

[39]  Z. Cao,et al.  Energy Absorption of Aluminum Foam-Filled Tubes Under Quasi-Static Axial Loading , 2012 .

[40]  T. Hamada,et al.  Axial Crushing Performance of Porous Aluminum Filled Members , 2009 .

[41]  David P. Thambiratnam,et al.  Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading , 2009 .

[42]  John Banhart,et al.  Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications , 2008 .

[43]  Mustafa Güden,et al.  Experimental investigation of interaction effects in foam-filled thin-walled aluminum tubes , 2006 .

[44]  Magnus Langseth,et al.  A numerical model for bird strike of aluminium foam-based sandwich panels , 2006 .

[45]  A. Kennedy,et al.  The effect of Mg addition on the stability of Al–Al2O3 foams made by a powder metallurgy route , 2006 .

[46]  A. Kennedy,et al.  Effect of bonding strength on the energy absorption of Al foam-filled cylindrical tube , 2004 .

[47]  A. Toksoy,et al.  Effect of adhesive on the strengthening of aluminum foam-filled circular tubes , 2004 .

[48]  Lorna J. Gibson,et al.  Mechanical Behavior of Metallic Foams , 2000 .

[49]  F. Rammerstorfer,et al.  Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam , 2000 .

[50]  I. R. Pashby,et al.  Joining techniques for aluminium spaceframes used in automobiles , 2000 .

[51]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[52]  M. Ansari,et al.  Simulation of thin-walled double hexagonal aluminium 5754 alloy foam-filled section subjected to direct and oblique loading , 2021 .

[53]  Y. Hangai,et al.  Aluminum alloy foam-filled aluminum tube fabricated by friction stir back extrusion and its compression properties , 2018 .

[54]  Yu Ying-hua.  Compressive Properties of Advanced Pore Morphology Aluminum Foam Filling Square Tube , 2013 .

[55]  Pang Zhen-ya.  Quasi-static compression behaviors of cylindrical tubes filled with open-cell aluminum foam , 2009 .

[56]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[57]  K.R.F. Andrews,et al.  Classification of the axial collapse of cylindrical tubes under quasi-static loading , 1983 .