Design, simulation, and testing of a novel micro-channel heat exchanger for natural gas cooling in automotive applications

Abstract Micro-channel heat exchangers offer potential for a highly compact solution in heat transfer applications that have space limitations. Mobile applications such as automotive vehicles are one such area. This work presents the design, modeling, simulation and testing of a two-region micro-channel heat exchanger, employing both engine coolant and R134a, for use in an engine that compresses natural gas for on-board refueling at pressures up to 250 bar. The novel design of the micro-channel heat exchanger is presented. Numerical simulations were performed using ANSYS Fluent utilizing extrapolation techniques to estimate the pressure drop as a function of flow rate and symmetry methods to investigate heat transfer. Pressure drop was determined experimentally, and heat transfer was investigated through system tests employing the novel engine. Experimental results showed good comparison with corresponding numerical simulations which demonstrated the validity of the applied extrapolation and symmetry methods, enabling considerable reduction in computational cost. The pressure drop, flow distribution, and heat transfer characteristics of the heat exchanger are discussed.

[1]  Lounes Tadrist,et al.  Review on two-phase flow distribution in parallel channels with macro and micro hydraulic diameters: Main results, analyses, trends , 2013 .

[2]  D. Bharathan,et al.  An assessment of air cooling for use with automotive power electronics , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[3]  Andrzej Ordys,et al.  Controlling Variable Coolant Temperature in Internal Combustion Engines and its Effects on Fuel Consumption , 2014 .

[4]  Y. Tsai,et al.  Investigations of the pressure drop and flow distribution in a chevron-type plate heat exchanger , 2009 .

[5]  David Southall.  Diffusion Bonding in Compact Heat Exchangers , 2009 .

[6]  Yoon-Ho Kim,et al.  Heat Transfer and Pressure Drop Characteristics in Straight Microchannel of Printed Circuit Heat Exchangers , 2015, Entropy.

[7]  Reinaldo Giudici,et al.  Development of a micro-heat exchanger with stacked plates using LTCC technology , 2010 .

[8]  B. Prabhakara Rao,et al.  An Experimental Study on the Influence of Flow Maldistribution on the Pressure Drop Across a Plate Heat Exchanger , 2004 .

[9]  M. Abu-Khader.  Plate heat exchangers: Recent advances , 2012 .

[10]  Christopher L. Hagen,et al.  Development and operation of a self-refueling compressed natural gas vehicle , 2015 .

[11]  Kai Wang,et al.  Characterization and modeling of micromixing performance in micropore dispersion reactors , 2010 .

[12]  S. Garimella,et al.  Thermally Developing Flow and Heat Transfer in Rectangular Microchannels of Different Aspect Ratios , 2006 .

[13]  Ming Li,et al.  A review of development of micro-channel heat exchanger applied in air-conditioning system , 2012 .

[14]  Amir Jokar,et al.  A Microchannel Heat Exchanger for Electronics Cooling Applications , 2008 .

[15]  V. Wadekar.  HEAT EXCHANGERS IN PROCESS INDUSTRY AND MINI-AND MICROSCALE HEAT TRANSFER , 2005 .

[16]  Christopher L. Hagen,et al.  Design and Analysis of a Self-Refueling CNG Vehicle to Provide Home Refueling , 2014 .

[17]  Marko P. Hekkert,et al.  Understanding the formative stage of technological innovation system development: The case of natural gas as an automotive fuel , 2010 .

[18]  Amir Fartaj,et al.  A review on microchannel heat exchangers and potential applications , 2011 .

[19]  Shyam Menon,et al.  Development and Analysis of Micro-Channel Heat Exchangers for Natural Gas Cooling , 2015 .

[21]  L. Bohra.  FLOW AND PRESSURE DROP OF HIGHLY VISCOUS FLUIDS IN SMALL APERTURE ORIFICES , 2004 .

[22]  M. Ohadi,et al.  Next Generation Microchannel Heat Exchangers , 2012 .

[23]  H. Martin,et al.  Flow distribution and pressure drop in plate heat exchangers—II Z-type arrangement , 1984 .

[24]  Gus Thomas Checketts.  Microchannel Radiator: an Investigation of Microchannel Technology with Applications in Automotive Radiator Heat Exchangers , 2014 .

[25]  Yong Wang,et al.  Microchannel Chemical Reactors for Fuel Processing Applications. II. Compact Fuel Vaporization , 2000 .

[26]  Y. Zohar,et al.  A suspended microchannel with integrated temperature sensors for high-pressure flow studies , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[27]  Xiangqin Lin,et al.  Investigation on shot-coke-forming propensity and controlling of coke morphology during heavy oil coking , 2012 .