Fracture characterization of thin bonded asphalt concrete overlay systems

[1]  Joseph F Labuz,et al.  Determining the Low-Temperature Fracture Toughness of Asphalt Mixtures , 2002 .

[2]  William G. Buttlar,et al.  The effect of long-term laboratory aging on asphalt concrete fracture energy , 2009 .

[3]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[4]  Reynaldo Roque,et al.  Evaluation of Laboratory-Measured Crack Growth Rate for Asphalt Mixtures , 2001 .

[5]  Reynaldo Roque,et al.  Development and Field Evaluation of Energy-Based Criteria for Top-down Cracking Performance of Hot Mix Asphalt , 2004 .

[6]  Jerry Geib,et al.  Performance of Ultra-Thin Bounded Wearing Course (UTBWC) Surface Treatment on US-169 Princeton, MN , 2007 .

[7]  Yiu-Wing Mai,et al.  Fracture Mechanics of Cementitious Materials , 1995 .

[8]  Glaucio H. Paulino,et al.  Influence of the Cohesive Zone Model Shape Parameter on Asphalt Concrete Fracture Behavior , 2008 .

[9]  Matthew W Witczak,et al.  Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures , 2002 .

[10]  Judith B. Corley-Lay,et al.  Ultrathin Bonded Wearing Course as Pavement Preservation Treatment for Jointed Concrete Pavements , 2007 .

[11]  J S Moulthrop,et al.  STATE OF THE ART AND STATE OF THE PRACTICE IN PAVEMENT MAINTENANCE , 2000 .

[12]  Andy Collop,et al.  Laboratory assessment of the resistance to crack propagation in high-stiffness asphaltic materials , 2004 .

[13]  J Samanos,et al.  NEW TYPE OF ULTRATHIN FRICTION COURSE , 1991 .

[14]  I. Al-Qadi,et al.  Fracture-Based Friction Model for Pavement Interface Characterization , 2008 .

[15]  Eshan V. Dave,et al.  Asphalt pavement aging and temperature dependent properties using functionally graded viscoelastic model , 2009 .

[16]  James S. Moulthrop,et al.  Selecting a Preventive Maintenance Treatment for Flexible Pavements , 1999 .

[17]  Joseph F Labuz,et al.  Observation of Crack Propagation in Asphalt Mixtures with Acoustic Emission , 2006 .

[18]  W. Buttlar,et al.  Thermal reflective cracking of asphalt concrete overlays , 2010 .

[19]  Michael S Mamlouk,et al.  Evaluation of crack propagation properties of asphalt mixtures , 1997 .

[20]  K Majidzadeh,et al.  APPLICATION OF FRACTURE MECHANICS IN THE ANALYSIS OF PAVEMENT FATIGUE , 1971 .

[21]  K. Chong,et al.  New specimens for mixed mode fracture investigations of geomaterials , 1988 .

[22]  Barry J. Dempsey,et al.  Enhanced Integrated Climatic Model Version 2.0 , 1997 .

[23]  K. Rajagopal,et al.  Review of the uses and modeling of bitumen from ancient to modern times , 2003 .

[24]  Y Brosseaud,et al.  THINNER AND THINNER ASPHALT LAYERS FOR MAINTENANCE OF FRENCH ROADS , 1992 .

[25]  Reynaldo Roque,et al.  Performance-Based Fracture Criterion for Evaluation of Moisture Susceptibility in Hot-Mix Asphalt , 2004 .

[26]  Douglas I Hanson.  Construction and Performance of an Ultrathin Bonded Hot-Mix Asphalt Wearing Course , 2001 .

[27]  Christine M Reed.  SEVEN-YEAR PERFORMANCE EVALUATION OF SINGLE PASS, THIN LIFT BITUMINOUS CONCRETE OVERLAYS , 1994 .

[28]  Y. Motola,et al.  Anisotropy of Field-Compacted Asphalt Concrete Material , 2007 .

[29]  M. Manjoine.  Biaxial Brittle Fracture Tests , 1965 .

[30]  André Molenaar,et al.  Application of fracture mechanics principles to analyse cracking in asphalt concrete , 1996 .

[31]  Reynaldo Roque,et al.  DETERMINATION OF CRACK GROWTH RATE PARAMETER OF ASPHALT MIXTURES USING THE SUPERPAVE IDT , 1999 .

[32]  Glaucio H. Paulino,et al.  δ25 Crack opening displacement parameter in cohesive zone models: experiments and simulations in asphalt concrete , 2008 .

[33]  E. Wessel.  State of the art of the WOL specimen for KIc fracture toughness testing , 1968 .

[34]  Jorge Barbosa Soares,et al.  Model for Predicting Damage Evolution in Heterogeneous Viscoelastic Asphaltic Mixtures , 2004 .

[35]  Glaucio H. Paulino,et al.  Laboratory Testing Suite for Characterization of Asphalt Concrete Mixtures Obtained from Field Cores (With Discussion) , 2006 .

[36]  William G. Buttlar,et al.  Influence of Specimen Size on Fracture Energy of Asphalt Concrete (With Discussion) , 2007 .

[37]  Y. Richard Kim,et al.  Experimental Investigation of Anisotropy in Asphalt Concrete , 2005 .

[38]  Salman Hakimzadeh,et al.  Development of fracture-energy based interface bond test for asphalt concrete , 2012 .

[39]  A. Braham,et al.  Anisotropic Behavior of Hot-Mix Asphalt at Low Temperatures , 2008 .

[40]  S. H. Carpenter,et al.  Interface Bonding between Hot-Mix Asphalt and Various Portland Cement Concrete Surfaces , 2008 .

[41]  William G. Buttlar,et al.  Effect of Binder Type, Aggregate, and Mixture Composition on Fracture Energy of Hot-Mix Asphalt in Cold Climates , 2007 .

[42]  Michael Parker Wagoner.  Fracture Tests for Bituminous-Aggregate Mixtures: Laboratory and Field Investigations , 2006 .

[43]  Seong Hyeok Song.  Fracture of Asphalt Concrete: A Cohesive Zone Modeling Approach Considering Viscoelastic Effects , 2006 .

[44]  M. A. Mull,et al.  Fracture resistance characterization of chemically modified crumb rubber asphalt pavement , 2002 .

[45]  R. Roque,et al.  Introduction of fracture resistance to the design and evaluation of open graded friction courses in Florida : final report, July 2009. , 2009 .

[46]  Imad L. Al-Qadi,et al.  Finite Element Method Modeling of Reflective Cracking Initiation and Propagation: Investigation of the Effect of Steel Reinforcement Interlayer on Retarding Reflective Cracking in Hot-Mix Asphalt Overlay , 2006 .

[47]  William G. Buttlar,et al.  Cracking resistance of thin-bonded overlays using fracture test, numerical simulations and early field performance , 2013 .

[48]  A. Shukla,et al.  RHEOLOGICAL AND MECHANICAL PROPERTIES OF BLENDED ASPHALTS CONTAINING RECYCLED ASPHALT PAVEMENT BINDERS , 1999 .

[49]  Cindy K Estakhri,et al.  EVALUATION OF ULTRATHIN FRICTION COURSE , 1994 .

[50]  Glaucio H. Paulino,et al.  Development of a Single-Edge Notched Beam Test for the Study of Asphalt Concrete Fracture , 2005 .

[51]  Louay N. Mohammad,et al.  Performance Evaluation of Novachip Surface Treatment in Louisiana , 2005 .

[52]  Reynaldo Roque,et al.  DEVELOPMENT AND EVALUATION OF THE STRATEGIC HIGHWAY RESEARCH PROGRAM MEASUREMENT AND ANALYSIS SYSTEM FOR INDIRECT TENSILE TESTING AT LOW TEMPERATURES , 1994 .

[53]  Mihai O. Marasteanu,et al.  Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test , 2004 .

[54]  G. H. Paulino,et al.  Disk-shaped compact tension test for asphalt concrete fracture , 2005 .

[55]  K. P. Chong,et al.  New specimen for fracture toughness determination for rock and other materials , 1984 .

[56]  Prithvi S. Kandhal,et al.  CONSTRUCTION AND PERFORMANCE OF ULTRATHIN ASPHALT FRICTION COURSE , 1997 .

[57]  G. H. Paulino,et al.  Reflective and thermal cracking modeling of asphalt concrete overlays , 2007 .

[58]  Yang H. Huang,et al.  Pavement analysis and design , 1992 .

[59]  André Molenaar,et al.  SEMI-CIRCULAR BENDING TEST; SIMPLE BUT USEFUL? , 2002 .

[60]  Fujie Zhou,et al.  DESIGN AND PERFORMANCE EVALUATION OF VERY THIN OVERLAYS IN TEXAS , 2009 .

[61]  Glaucio H. Paulino,et al.  A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material , 2006 .

[62]  W. Buttlar,et al.  Compact tension test for fracture characterization of thin bonded asphalt overlay systems at low temperature , 2012 .

[63]  R. Roque,et al.  The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode , 1992 .

[64]  E V Dave.  Integration of laboratory testing, field performance and numerical simulations for the study of low-temperature cracking , 2008 .

[65]  Mustaque Hossain,et al.  Fracture and Tensile Characteristics of Asphalt-Rubber Concrete , 1999 .