Measurement versus predictions of rotordynamic coefficients of seal with swirl brakes

Abstract Seal rotordynamic coefficients have a primary influence on stability response of high-performance turbomachinery. The swirl brake is one approach to improve the rotordynamic characteristics of seals. Although swirl brakes have been used successfully in practice, the experimental studies dealing with the rotordynamic coefficients associated with different swirl brake geometries as well as operating conditions are very spare. The present research investigates the effects of the swirl brakes on the rotordynamics of labyrinth seals. Experiments are presented to identify the stiffness and damping force coefficients using an improved impedance method based on unbalanced synchronous excitation method on a rotating test rig. Several design parameters, such as swirl brake density and length have been considered and also the operating conditions (inlet/outlet pressure ratio and rotating speed) are accounted for. Test results demonstrate the pronounced favorable influence of the swirl brake to effectively reduce the cross-couple stiffness and increase the direct damping for variable conditions. It is believed that the results of this study will assist in improving the design of annular seals.

[1]  K. Kwanka,et al.  Improving the Stability of Labyrinth Gas Seals , 2001 .

[2]  Dara W. Childs,et al.  Experimental and theoretical comparison of two swirl brake designs , 2001 .

[3]  Alain Gelin,et al.  Experience in Full-Load Testing of Natural Gas Centrifugal Compressors for Rotordynamics Improvements , 1997 .

[4]  R. A. Van den Braembussche,et al.  Optimization of Swirl Brakes by Means of a 3D Navier-Stokes Solver , 1998 .

[5]  Dara W. Childs,et al.  Experimental Rotordynamic Coefficient Results for (a) a Labyrinth Seal With and Without Shunt Injection and (b) a Honeycomb Seal , 1999 .

[6]  Santosha K. Dwivedy,et al.  A review of the experimental estimation of the rotor dynamic parameters of seals , 2005 .

[7]  J. Wachter,et al.  Flow Induced Spring Coefficients of Labyrinth Seals for Application in Rotor Dynamics , 1980 .

[8]  Guang Meng,et al.  Numerical and experimental study of a rotor–bearing–seal system , 2007 .

[9]  Wei Li,et al.  A novel nonlinear model of rotor/bearing/seal system and numerical analysis , 2011 .

[10]  R. Moffat,et al.  Design, Testing, And Field Experience Of A High-Pressure Natural Gas Reinjection Compressor. , 2000 .

[11]  Dara W. Childs,et al.  Annular Gas Seals And Rotordynamics Of Compressors And Turbines. , 1997 .

[12]  Giuseppe Vannini,et al.  Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio , 2012 .

[14]  Dan Sun,et al.  A trigonometric series expansion based method for the research of static and dynamic characteristics of eccentric seals , 2014 .

[15]  Dara W. Childs,et al.  A Study of the Effects of Inlet Preswirl on the Dynamic Coefficients of a Straight-Bore Honeycomb Gas Damper Seal , 2004 .