Condensation pressure during amalgam placement in patients.

The purpose of this study was to investigate the condensation pressure during amalgam placement in patients. Forty-four practitioners were asked to fill two class 2 cavities in the lower jaw on their patients in their own practice with the aid of a force-measuring plugger. This device, with semiconductor strain gauges, allowed the dentist to have an identical tactile feedback as with any other plugger. Three different amalgams, with different shapes of alloy particles, were tested. The results showed a maximum condensation pressure of 8.9+/-2.4 MPa and 5.5+/-1.8 MPa with a small and a large amalgam plugger, respectively. Average condensation pressures were 3.7+/-1.3 MPa for the small and 2.2+/-0.9 MPa for the large instrument. The total working time required to fill a cavity was on average 131 s; the amalgam was effectively condensed for 44 s. No significant differences between amalgams with different shapes of alloy particles, no influence of time of day, and no difference between female and male dentists were found. This study showed that the condensation pressure is lower than often recommended, and that it is not statistically different from the values obtained in a previous laboratory study.

[1]  Brown Ih,et al.  Alloy particle shape and sensitivity of high-copper amalgams to manipulative variables. , 1993 .

[2]  D. Miller,et al.  Variation in condensation pressure during clinical packing of amalgam restorations. , 1993, American journal of dentistry.

[3]  J. Osborne.  Three-year clinical performance of eight amalgam alloys. , 1990, American journal of dentistry.

[4]  A. Lussi,et al.  A New to the Condensation of Amalgam Under in vivo Conditions , 1987 .

[5]  M. A. van 't Hof,et al.  The influence of the condensation instrument on the clinical behaviour of amalgam restorations. , 1987, Journal of oral rehabilitation.

[6]  J. Ekstrand,et al.  Influence of variations in preparation of dental amalgam on dimensional stability and porosities. , 1985, The Journal of prosthetic dentistry.

[7]  J. M. Carter,et al.  Some properties of high-copper amalgam alloys comparing hand and mechanical trituration. , 1984, The Journal of prosthetic dentistry.

[8]  J. Leitão.  Polishability of dental amalgam as influenced by condensation pressure and primary mercury content. , 1983, Acta odontologica Scandinavica.

[9]  J. W. Farah,et al.  The influence of condensing pressure on the strength of three dental amalgams. , 1981, Operative dentistry.

[10]  J. Dahl,et al.  Marginal integrity of amalgam restorations. , 1980, Acta odontologica Scandinavica.

[11]  H. Wilson,et al.  Spherical particle amalgam , 1971, British Dental Journal.

[12]  J. Silness,et al.  Porosity of spherical amalgam. , 1970, Scandinavian journal of dental research.

[13]  Wilson Hj,et al.  Condensation of amalgam. The clinical measurement of forces and rates of packing. , 1968 .

[14]  R. Waterstrat,et al.  Effects of packing pressures on the properties of spherical alloy amalgams. , 1967, Journal of the American Dental Association.

[15]  K. D. Jørgensen,et al.  The effect of porosity and mercury content upon the strength of silver amalgam. , 1966, Acta odontologica Scandinavica.

[16]  J. Mitchem,et al.  EFFECT OF PRECONDENSATION MERCURY CONTENT ON THE PHYSICAL PROPERTIES OF AMALGAM. , 1965, Journal of the American Dental Association.