A non-invasive optical fiber pulse sensor using a single-mode thin-core fiber for home health monitoring

A non-invasive optical fiber pulse sensor is proposed and experimentally demonstrated. It comprises a simple structure in which a section of thin-core fiber is spliced into another single-mode fiber. And a silicone rubber device is designed to ensure that weak pulse signals are detected. To assess the availability of the optical fiber pulse sensor, a commercial photoplethysmograph is used to measure the pulse of the same subject as a control. The measurement results of the two methods are consistent. The fiber pulse sensor can show a segmented signal in individual pulses, which provides more physiological information. It also possesses the advantages of high sensitivity, simple signal acquisition and processing, easy fabrication, and thus is an ideal candidate for replacing traditional electrical sensor.

[1]  J. H. Cole,et al.  Microbend fiber-optic sensor. , 1987, Applied optics.

[2]  J. Pépin,et al.  Pulse transit time: an appraisal of potential clinical applications , 1999, Thorax.

[3]  Kazuhiro Watanabe,et al.  Macrobending Characteristics of a Hetero-Core Splice Fiber Optic Sensor for Displacement and Liquid Detection , 2000 .

[4]  Pieter L. Swart,et al.  Blood pressure manometer using a twin Bragg grating Fabry-Perot interferometer , 2005, SPIE/COS Photonics Asia.

[5]  Michiko Nishiyama,et al.  A deformation sensitive pad-structure embedded with hetero-core optic fiber sensors , 2007 .

[6]  Stefan Hey,et al.  Continuous Noninvasive Pulse Transit Time Measurement for Psycho-physiological Stress Monitoring , 2009, 2009 International Conference on eHealth, Telemedicine, and Social Medicine.

[7]  Hiroyuki Sasaki,et al.  A humidity sensor based on a hetero-core optical fiber , 2010 .

[8]  Alan Mathewson,et al.  An Investigation of Pulse Transit Time as a Non-Invasive Blood Pressure Measurement Method , 2011 .

[9]  Jing Zhang,et al.  Reflective fiber-optic refractometer based on a thin-core fiber tailored Bragg grating reflection. , 2012, Optics letters.

[10]  Chi Chiu Chan,et al.  Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating , 2012 .

[11]  A. Danicic,et al.  Fibre-grating sensors for the measurement of physiological pulsations , 2013 .

[12]  Deming Liu,et al.  Sensitivity-enhanced fiber optic temperature sensor with strain response suppression , 2013 .

[13]  Hui Yang,et al.  Intensity-Modulated Microbend Fiber Optic Sensor for Respiratory Monitoring and Gating During MRI , 2013, IEEE Transactions on Biomedical Engineering.

[14]  Subhas Chandra Mukhopadhyay,et al.  Wearable Sensors for Human Activity Monitoring: A Review , 2015, IEEE Sensors Journal.

[15]  Ph. André,et al.  Plastic Optical Fiber Sensor for Noninvasive Arterial Pulse Waveform Monitoring , 2015 .

[16]  Michiko Nishiyama,et al.  Unconstrained pulse pressure monitoring for health management using hetero-core fiber optic sensor. , 2016, Biomedical optics express.

[17]  Lina Yao,et al.  A sensor-based wrist pulse signal processing and lung cancer recognition , 2018, J. Biomed. Informatics.