A Recurrent Neural Network for Warpage Prediction in Injection Molding

Injection molding is classified as one of the most flexible and economical manufacturing processes with high volumeof plastic molded parts. Causes of variations in the process are related to the vast number of factors acting during aregular production run, which directly impacts the quality of final products. A common quality trouble in finishedproducts is the presence of warpage. Thus, this study aimed to design a system based on recurrent neural networksto predict warpage defects in products manufactured through injection molding. Five process parameters areemployed for being considered to be critical and have a great impact on the warpage of plastic components. Thisstudy used the finite element analysis software Moldflow to simulate the injection molding process to collect data inorder to train and test the recurrent neural network. Recurrent neural networks were used to understand the dynamicsof the process and due to their memorization ability, warpage values might be predicted accurately. Results show thedesigned network works well in prediction tasks, overcoming those predictions generated by feedforward neuralnetworks.

[1]  V. Kvasníeka,et al.  Application of Recurrent Neural Networks in Chemistry . Prediction and Classification of 13 C NMR Chemical Shifts in a Series of Monosubstituted Benzenes , 2001 .

[2]  B. Ribeiro,et al.  A neural prediction model for monitoring and fault diagnosis of a plastic injection moulding process , 1999, 1999 European Control Conference (ECC).

[3]  B. Sidda Reddy,et al.  Application of Soft Computing for the Prediction of Warpage of Plastic Injection Molded Parts , 2009 .

[4]  Babur Ozcelik,et al.  Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method , 2006 .

[5]  Jiri Pospichal,et al.  Application of recurrent neural networks in chemistry. Prediction and classification of carbon-13 NMR chemical shifts in a series of monosubstituted benzenes , 1992, J. Chem. Inf. Comput. Sci..

[6]  Siavash Gheshmi,et al.  Optimization of injection molding process parameters using sequential simplex algorithm , 2011 .

[7]  Huizhuo Shi,et al.  Optimization of injection molding process parameters using integrated artificial neural network model and expected improvement function method , 2010 .

[8]  D. Wunsch,et al.  Time series prediction with recurrent neural networks using a hybrid PSO-EA algorithm , 2004, 2004 IEEE International Joint Conference on Neural Networks (IEEE Cat. No.04CH37541).

[9]  Chee Peng Lim,et al.  Application of a Recurrent Neural Network to Prediction of Drug Dissolution Profiles , 2002, Neural Computing & Applications.

[10]  Y. C. Su,et al.  Shrinkage and warpage prediction of injection-molded thin-wall parts using artificial neural networks , 2004 .

[11]  Wen-Chin Chen,et al.  A neural network-based approach for dynamic quality prediction in a plastic injection molding process , 2008, Expert Syst. Appl..

[12]  Erguo Li,et al.  A GENETIC NEURAL FUZZY SYSTEM AND ITS APPLICATION IN QUALITY PREDICTION IN THE INJECTION PROCESS , 2004 .

[13]  Ching-Chih Tsai,et al.  Adaptive Predictive Control With Recurrent Neural Network for Industrial Processes: An Application to Temperature Control of a Variable-Frequency Oil-Cooling Machine , 2008, IEEE Transactions on Industrial Electronics.

[14]  Danilo P. Mandic,et al.  Recurrent Neural Networks for Prediction: Learning Algorithms, Architectures and Stability , 2001 .

[15]  Duc Truong Pham,et al.  Neural Networks for Identification, Prediction and Control , 1995 .

[16]  Y. Lam,et al.  A hybrid of mode-pursuing sampling method and genetic algorithm for minimization of injection molding warpage , 2010 .

[17]  Ming-Chih Huang,et al.  The effective factors in the warpage problem of an injection-molded part with a thin shell feature , 2001 .

[18]  Babur Ozcelik,et al.  Warpage and structural analysis of thin shell plastic in the plastic injection molding , 2009 .

[19]  Ching-Chih Tsai,et al.  Predictive Control Based on Recurrent Neural Network and Application to Plastic Injection Molding Processes , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[20]  Michel Pasquier,et al.  A Novel Recurrent Neural Network Based Prediction System for Trading , 2006, The 2006 IEEE International Joint Conference on Neural Network Proceedings.

[21]  Ruxu Du,et al.  A New Method for Monitoring and Tuning Plastic Injection molding Machines , 2008, Control. Intell. Syst..

[22]  Lin Hua,et al.  Back Propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding , 2011 .