Exposure Characteristics of Photoresist Illuminated by Near-field Light

We show an application of a scanning near-field optical microscopy (SNOM) to nanofabrication. SNOM can obtain a resolution beyond the diffraction limit by placing a subwavelength aperture in close proximity to a sample. A sharpened and bent optical fiber with a small aperture is used as a near-field optical probe as well as a cantilever of an atomic force microscope (AFM). To improve the optical resolution, the aperture should be placed as close to the sample as possible. In order to decrease the distance between the aperture and the sample, a thin optical fiber probe with low spring constant (-10N/m) is operated in contact mode. Positive photoresist film for g-line (λ=436nm) is exposed by the near-field light from the thin optical fiber probe coupled by a He-Cd laser (λ=442nm) and developed normally. Groove pattern as narrow as 80nm in full width is produced in the photoresist film on a Si wafer. The exposure characteristics of the photoresist illuminated by the near-field light are discussed.

[1]  E. Betzig,et al.  Near-Field Optics: Microscopy, Spectroscopy, and Surface Modification Beyond the Diffraction Limit , 1992, Science.

[2]  Klony Lieberman,et al.  A micropipette force probe suitable for near‐field scanning optical microscopy , 1992 .

[3]  Hirosato Monobe,et al.  Scanning Near-field Fluorescence Microscopy and Nanoscopic Fluorescence Spectroscopy in Combination with a Non-contact Scanning Force Microscope. , 1994 .

[4]  H. Hiroshima,et al.  Printing Sub-100 Nanometer Features Near-Field Photolithography , 1998, Digest of Papers. Microprocesses and Nanotechnology'98. 198 International Microprocesses and Nanotechnology Conference (Cat. No.98EX135).

[5]  M. Kryder,et al.  Near‐field magneto‐optics and high density data storage , 1992 .

[6]  Kunio Nakajima,et al.  Optical processing by scanning near-field optical/atomic force microscopy , 1996 .

[7]  Kunio Nakajima,et al.  Near‐field optical microscopy in liquids , 1995 .

[8]  Kunio Nakajima,et al.  Polarization properties of light emitted by a bent optical fiber probe and polarization contrast in scanning near-field optical microscopy , 1998 .

[9]  Lukas Novotny,et al.  Near-field, far-field and imaging properties of the 2D aperture SNOM , 1995 .

[10]  M. Esashi,et al.  Sub-Wavelength Pattern Transfer By Near Field Photo-Lithography , 1998, Digest of Papers. Microprocesses and Nanotechnology'98. 198 International Microprocesses and Nanotechnology Conference (Cat. No.98EX135).

[11]  Motoichi Ohtsu,et al.  INCREASING THROUGHPUT OF A NEAR-FIELD OPTICAL FIBER PROBE OVER 1000 TIMES BY THE USE OF A TRIPLE-TAPERED STRUCTURE , 1998 .

[12]  N. F. van Hulst,et al.  Near-field optical microscope using a silicon-nitride probe , 1993 .

[13]  Norio Chiba,et al.  Frictional imaging in a scanning near-field optical/atomic-force microscope by a thin step etched optical fiber probe , 1997 .

[14]  Dieter W. Pohl,et al.  Near‐field optical scanning microscopy in reflection , 1988 .

[15]  W. Denk,et al.  Optical stethoscopy: Image recording with resolution λ/20 , 1984 .

[16]  Norio Chiba,et al.  Observation of Topography and Optical Image of Optical Fiber End by Atomic Force Mode Scanning Near-Field Optical Microscope , 1995 .