Ultrahigh Temperature Ceramic‐Based Composites

[1]  S. Guo,et al.  Mechanical and physical behaviors of short pitch-based carbon fiber-reinforced HfB2–SiC matrix composites , 2013 .

[2]  S. Guo,et al.  Tough hybrid ceramic-based material with high strength , 2012 .

[3]  Guo‐Jun Zhang,et al.  Pressureless sintering of HfB2–SiC ceramics doped with WC , 2012 .

[4]  S. Guo,et al.  Densification behavior and microstructure of spark plasma sintered ZrB2-based composites with SiC particles , 2012 .

[5]  S. Guo,et al.  Preparation of zirconium diboride ceramics by reactive spark plasma sintering of zirconium hydride–boron powders , 2011 .

[6]  G. Hilmas,et al.  Mechanical properties of sintered ZrB2–SiC ceramics , 2011 .

[7]  D. Sciti,et al.  Spark plasma sintering of HfB2 with low additions of silicides of molybdenum and tantalum , 2010 .

[8]  Y. Sakka,et al.  Microstructure and properties of ZrB2–SiC and HfB2–SiC composites fabricated by spark plasma sintering (SPS) using TaSi2 as sintering aid , 2010 .

[9]  D. Sciti,et al.  Toughened ZrB2-based ceramics through SiC whisker or SiC chopped fiber additions , 2010 .

[10]  J. Yang,et al.  Effect of SiC particle dispersion on thermal properties of SiC particle-dispersed ZrB2 matrix composites , 2010 .

[11]  J. Zou,et al.  Pressureless sintering mechanisms and mechanical properties of hafnium diboride ceramics with pre-sintering heat treatment , 2010 .

[12]  Guo‐Jun Zhang,et al.  ZrB2–MoSi2 composites toughened by elongated ZrB2 grains via reactive hot pressing , 2009 .

[13]  Jiecai Han,et al.  Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites , 2009 .

[14]  S. Guo,et al.  Mechanical behavior of two-step hot-pressed ZrB2-based composites with ZrSi2 , 2009 .

[15]  S. Guo,et al.  Elastic properties of spark plasma sintered (SPSed) ZrB2–ZrC–SiC composites , 2008 .

[16]  S. Guo,et al.  Effect of thermal exposure on strength of ZrB2-based composites with nano-sized SiC particles , 2008 .

[17]  D. Sciti,et al.  Sintering and Mechanical Properties of ZrB 2 -TaSi 2 and HfB 2 -TaSi 2 Ceramic Composites , 2008 .

[18]  Yutaka Kagawa,et al.  Spark Plasma Sintering of Zirconium Diborides , 2008 .

[19]  G. Hilmas,et al.  Pressureless Sintering of Zirconium Diboride: Particle Size and Additive Effects , 2008 .

[20]  M. Nygren,et al.  Densification and Mechanical Behavior of HfC and HfB2 Fabricated by Spark Plasma Sintering , 2008 .

[21]  G. Hilmas,et al.  Thermophysical Properties of ZrB2-Based Ceramics , 2008 .

[22]  S. Guo,et al.  Pressureless sintering and physical properties of ZrB2-based composites with ZrSi2 additive , 2008 .

[23]  Raffaele Savino,et al.  Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials , 2008 .

[24]  S. Guo,et al.  Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites , 2008 .

[25]  S. Guo,et al.  Mechanical properties of hot-pressed ZrB2–MoSi2–SiC composites , 2008 .

[26]  Guo‐Jun Zhang,et al.  Preparation and Microstructure of a ZrB2–SiC Composite Fabricated by the Spark Plasma Sintering–Reactive Synthesis (SPS–RS) Method , 2007 .

[27]  William G. Fahrenholtz,et al.  Pressureless Sintering of Zirconium Diboride Using Boron Carbide and Carbon Additions , 2007 .

[28]  N. Padture,et al.  Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids , 2007 .

[29]  S. Guo,et al.  Thermal and Electric Properties in Hot‐Pressed ZrB2–MoSi2–SiC Composites , 2007 .

[30]  D. Sciti,et al.  Effects of MoSi2 additions on the properties of Hf-and Zr-B2 composites produced by pressureless sintering , 2007 .

[31]  G. Hilmas,et al.  Pressureless sintering of carbon-coated zirconium diboride powders , 2007 .

[32]  G. Hilmas,et al.  Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC , 2007 .

[33]  G. Hilmas,et al.  Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride–silicon carbide ceramics , 2007 .

[34]  G. Hilmas,et al.  Low-Temperature Densification of Zirconium Diboride Ceramics by Reactive Hot Pressing , 2006 .

[35]  Guo‐Jun Zhang,et al.  Reactive hot pressing of ZrB2-SiC-ZrC ultra high-temperature ceramics at 1800°C , 2006 .

[36]  D. Sciti,et al.  Properties of a Pressureless‐Sintered ZrB2–MoSi2 Ceramic Composite , 2006 .

[37]  G. Hilmas,et al.  Pressureless Densification of Zirconium Diboride with Boron Carbide Additions , 2006 .

[38]  F. Monteverde.  Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2 , 2006 .

[39]  Y. Kodera,et al.  Synthesis and characterization of dense ultra-high temperature thermal protection materials produced by field activation through spark plasma sintering (SPS): I. Hafnium Diboride , 2006 .

[40]  D. Sciti,et al.  Fast Densification of Ultra‐High‐Temperature Ceramics by Spark Plasma Sintering , 2006 .

[41]  Erica L. Corral,et al.  Ultra High Temperature Ceramics for Hypersonic Vehicle Applications , 2006 .

[42]  F. Monteverde.  Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2–SiC composite , 2005 .

[43]  A. Bellosi,et al.  Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates , 2005 .

[44]  A. Bellosi,et al.  Efficacy of HfN as sintering aid in the manufacture of ultrahigh-temperature metal diborides-matrix ceramics , 2004 .

[45]  Donald T. Ellerby,et al.  High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .

[46]  Alida Bellosi,et al.  Microstructure and Properties of an HfB2‐SiC Composite for Ultra High Temperature Applications , 2004 .

[47]  A. Bellosi,et al.  Beneficial Effects of AlN as Sintering Aid on Microstructure and Mechanical Properties of Hot‐pressed ZrB2 , 2003 .

[48]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[49]  Alida Bellosi,et al.  Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride , 2002 .

[50]  Guo‐Jun Zhang,et al.  Reactive Hot Pressing of ZrB2–SiC Composites , 2004 .

[51]  K. Upadhya,et al.  Materials for ultrahigh temperature structural applications , 1997 .

[52]  K. Takahashi,et al.  Effect of Uniformity on the Electrical Resistivity of SiC-ZrB2 Ceramic Composites , 1987 .

[53]  R. Jimbou,et al.  SiC-ZrB2, Electroconductive Ceramic Composite , 1986 .

[54]  H. Pastor.  Metallic Borides: Preparation of Solid Bodies — Sintering Methods and Properties of Solid Bodies , 1977 .

[55]  O. Hunter,et al.  Elastic properties of polycrystalline TiB2, ZrB2 and HfB2 from room temperature to 1300 °K☆ , 1969 .

[56]  D. Kalish,et al.  Strength, Fracture Mode, and Thermal Stress Resistance of HfB2 and ZrB2 , 1969 .

[57]  D. Kalish,et al.  Densification Mechanisms in High‐pressure Hot‐Pressing of HfB2 , 1969 .